Hi, I am burying wire from the outside meter panel to the new 100amp sub panel inside a garage. The run is 20' long. Is 2-2-2 Aluminum URD Cable good enough or do I need the 4/0-4/0-2/0 Black Stranded Aluminum Triplex URD Cable? Anyone that can answer I would greatly appreciate it.
Search the forum,
Discuss Running Aluminum URD Cable in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Running Aluminum URD Cable in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
I am working on a RV Park and I have a question.
I plan on installing 4/0 quadraplex AL URD cable to 10 pedestals on a 200 amp circuit and...
Hello, this is my first post here. I have a little experience with most types of household wiring through a decade of DIY remodeling, and...
I am adding a 60 AMP subpanel for a detached garage/workshop with a 200 foot underground conduit run from the main panel to the sub panel...
In preparation for an EVSE installation, I am running the supply cable from the main CU, via catenary, to a new CU in my garage.
The cable is 6mm...
I have a nickel iron battery I have chosen to put into a shed with Ventilation added for the hydrogen off gassing. I am planning to run the dc...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Anybody recognise this logo?On an old voltmeter. I'm not an electrician so maybe it's just some certification mark?
- Latest: liverburd
-
Failed socket!It's most likely to be a combination of a faulty socket and a slightly out of spec. plug...
- Latest: brianmoooore
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.