Discuss Need help with alarm system! in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Hellmooth

-
Esteemed
Reaction score
609
Hi guys, I've got an alarm panel at a job I'm doing, not sure what it is as don't really do much alarm work, I've attached pics though.

I have a pir that I need taken out of the system, just wondering if anyone can help me out with how best to do it?

I have pics of the panel, the manual and the pir, cheers.

Need help with alarm system! IMG_0958.JPG - EletriciansForums.net

Need help with alarm system! IMG_0959.JPG - EletriciansForums.net

Need help with alarm system! IMG_0941.JPG - EletriciansForums.net

Need help with alarm system! IMG_0750.JPG - EletriciansForums.net
 
That pir is connected to a zone in the panel, if you don't know which when then best way is to bell out the cable with multimeter.

Looks like a double pole system so you can then link out the zone in the panel and that pir is effectively removed but you will also need to link out the tamper for the pir but there is different ways to do this depending on whether it is a global or individual tamper.
 
USE THE OP. INSTRUCTIONS. WALK TEST THE pir TO SEE WHICH ZONE IT IS. REMOVE FROM ZONE. THEN IF GLOBAL TAMPER, id THE CORRECT GN/W TAMPER AND REMOVE. THEN ID THE 12V SUPPLY PAIR AND REMOVE. LINK OUT ZONE PAIR WITH A BIT OF SCRAP WIRE.
 
That pir is connected to a zone in the panel, if you don't know which when then best way is to bell out the cable with multimeter.

Looks like a double pole system so you can then link out the zone in the panel and that pir is effectively removed but you will also need to link out the tamper for the pir but there is different ways to do this depending on whether it is a global or individual tamper.
Yeah thought that would be the case, wasn't sure if I'd have to put a resistor of some sort in or just link it out! I'll work out which zone it is and link it out, will let you know how I get on and if I need any more help, cheers!
 
USE THE OP. INSTRUCTIONS. WALK TEST THE pir TO SEE WHICH ZONE IT IS. REMOVE FROM ZONE. THEN IF GLOBAL TAMPER, id THE CORRECT GN/W TAMPER AND REMOVE. THEN ID THE 12V SUPPLY PAIR AND REMOVE. LINK OUT ZONE PAIR WITH A BIT OF SCRAP WIRE.

Cheers Tel, I'll follow those instructions and get back to you if any issues, appreciated!
 

Reply to Need help with alarm system! in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock