Discuss NICEIC site assessment pass..... what now? in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net

I only received one technical non conformance but it was out of my hands. The house is empty and has previously installed some new sockets in the living room. All my tests were spot on at the time and obtained similar continuity tests on the L-L and N-N. however, it was clear the plasterer had been in since I was there as I pulled the sockets off and behind them were covered in dry plaster. First job to show the assessor and could have died. Assured him that this wasn't the case previously with the readings but he still had to note it as a technical non conformance. He said that there's probably a chance that moisture had gotten in or they had pulled forward sockets elsewhere in the house. Not good - was on edge as it was. L-L was 0.89 and N-N was 0.45 which was incorrect from last time
1f615.png


16 minutes ago · More

I'd not worry too much about the variation in readings. I think the assessor is more looking for you to be able to explain and show an understanding of why the test results vary. In any event so long as you your continuity and external loop impedance results all add up to being within the required limits and you can explain all this there's not much they can argue.

Presumably you had to show poly phase stuff too? Always used to be a requirement?

Well done by the way! The delay will just be the office checking through the paperwork. Subsequent assessments are now emailed to you there and then. At least mine are.
 

Reply to NICEIC site assessment pass..... what now? in the Certification NICEIC, NAPIT, Stroma, BECSA Forum area at ElectriciansForums.net

Similar Threads

NICEIC Certification Scheme NICEIC renewal assessment debacle!
Hi All, I recently had my NICEIC renewal assessment. We are a two man band. We only carry out small local work and we are approved contractors &...
Replies
14
Views
6K
Hi all, first post so go easy! This is for people who are looking for more info on the course and exams and is from my experience of doing the...
Replies
1
Views
3K
I'm starting a new project on Monday, new dental practice conversion from a shop. Nothing new here, customer doesn't know what electrical heating...
Replies
12
Views
713
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
Replies
7
Views
2K
NAPIT Certification Scheme Fraudulent EICR, who to contact?
I hope somebody can help me here, I really need some advice on who to complain to in this situation please: Hello, So after months of chasing my...
Replies
21
Views
6K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock