bell

Recent contents Top users
  1. D

    Time Bell Cable Potential Usage Doorbell/Security Camera (USB)

    Hi, I purchased a Time twin strand bell cable with a rating of 12-30V, 2A, low voltage, not for mains use. I wish to use this for installing our new Ring wired doorbell. We don't have an existing doorbell wired setup so it would need to conform to a DIN rail transformer specification of 24Vdc...
  2. J

    Ring wired - Help bypass Underdome Bell? Friedland 743 transforma

    Hi, I bought a Ring wired bell thinking, easy, just replace the current doorbell. Now I'm hunting down how to bypass the chime but am unsure of how given this underdome bell system? Please see photos, Friedland 743 transforma is separate with chime on wall, I can't see anything else and do not...
  3. O

    Connect Bell intercom to maglock.

    I used to fit Bell door entry systems all the while about 20 years ago but I'm a bit rusty on them now, am I correct in saying if you use a DC power supply the +12V goes straight to a yale type lock and the wire to the handset (Z) grounds the lock to the 0V rail completing the circuit and...
  4. A

    Blink video doorbell connect with 12v mechanical bell UK

    Hi. I have a blink video doorbell and want to connect a 12v mechanical bell (pic attached below). I know Blink only allow 16v-24v AC transformers for wired connection. I know I can attach only a few mechanical door chimes but the one below is preferred as the bell is loud (90db) and I have used...
  5. J

    Bell 801 entryphone installation issue

    Hello, I have bought a Bell 801 entryphone from Amazon UK and replacing my old one(which wasn't Bell 801). My old phone wiring diagram was numbers as opposed to Bell's one which reads IROTZ. I have tried to mirror the positioning of the cables based on the old model but the new Bell 801...
  6. M

    Remote control for Bell 801 door entry system

    Hi. Looking for help. My FiL has moved into a block of flats using the Bell 801 door release intercom for opening the main communal door to the flats. We have no opportunity to change the system for the whole block of flats. He is 80 and paraplegic and cannot get out of bed to let his carers in...
  7. A

    Smallest alarm bell box available

    Hello, Just wondering if there is such thing as a small size bell box for alarm? Not much info comes up on Google and they all seem pretty much the same size. I suppose size isn't critical on a house and they look like a deterrent. Asking as I want to install one on a boat and not a huge...
  8. Neptune

    Door bell wiring - advice please

    I am planning to replace battery powered door bell with one of these mains powered sets: https://www.cef.co.uk/catalogue/products/64350-wired-transformer-doorchime?gclid=f2ccabfbe9b010f462c9c947a329f18c&gclsrc=3p.ds&msclkid=f2ccabfbe9b010f462c9c947a329f18c A couple of questions please: 1. I...
  9. J

    Can I replace my old entry phone (bpt c200) with a bell 801.

    I have removed and looked at the old entry phone. It has 6 wires. Blue plus blue and white. Green plus green and white. Orange plus orange and white. Is it possible to put them into the IORTZ System on the new phone? Plz help it's driving me crazy
  10. J

    Converting a Bell 801 to wireless

    Are there any gadgets out there that allow you to replace a standard Bell 801 phone with a wireless phone?
  11. not wired

    Door bell issue

    I have salvaged the door bell operation from an old M&S intercom system which doesn't quite function as it should. When you make normal contact on the door bell button, the chime doesn't produce a clear and reasonably prolonged sound. Its muted (fuzzy) and only engages for a split second and...
  12. Z

    Door Bell Transformer

    I hoped someone might advise please: I'm replacing my ancient ( probably 40+ yrs old ) door bell transformer with a British General unit mounted in a Wylex housing, fed via a switched fused spur. The previous unit had a switch only, it was fused at the consumer unit connected into a lighting...
  13. T

    Ring door bell (wired) fitted now living room lights don’t work?

    Hi all, so I bought a Ring wired ring door bell on Amazon prime day, £45 with free echo dot! Anyway fitted as per instructions and it works fine. The Ring app tells me the transformer voltage is good. BUT now my living room lights won’t turn on? The doorbell and downstairs lights are on...
    • TerryJH
    • Thread
    • bell door doorbell electician electrical work fitted lights living ring room wired
    • Replies: 29
    • Forum: UK Electrical Forum
  14. J

    Replacing an outside bell box on an optima xm6 alarm.

    Hello. How do you replace an optima xm6 outside bell box. What would be a reasonable replacement and what connections would i find in the box. Thank you for your help.
  15. D

    Is this box my bell transformer?

    Hello All Always risky posting a picture especially this one with the cables not clipped nicely etc. Can only assure its not my work and was done 20+ years ago. Anyway, caveat out of the way ,is that black box the transformer for the bell? And is it being fed by that socket outlet plate...
    • Deleted member 112675
    • Thread
    • bell box transformer
    • Replies: 21
    • Forum: UK Electrical Forum
  16. B

    Bell wire

    I went to my son in laws house to put a transformer on some bell wiring he had done recently. The bell wire ran from the the door bell to the place that I would place the transformer ( distance about 12 feet) I tested the wire and there was no continuity(used a car continuity test or with light)...
  17. U

    Need help with Ring door bell

    Qualified electrician here. Need some advice with installing a Ring doorbell as mains powered in oppose to battery powered. I am pretty confident that I’ve sussed it out but I want to make sure before I go ahead and install it, it’s something that I’m not too familiar with. Customer has a...
  18. G

    Wireless door bell with old push button

    HI all, Got a customer that wants a wireless doorbell with two chimes, but sh want to keep her old brass bell pushfor two wire, can it be done somehow, cheers Grand
  19. R

    Issue with doorbell and bell.

    Hi, Hoping someone can help a diy-er during this period, I got bored, but I wish I’d left my video doorbell alone. Decided it was also time to get rid of the old ringer which I shoved a 0v-24v DC transformer in when i purchased the doorbell and obviously the chime casing never fitted properly...
  20. D

    Wired door bell additional chime

    Is there a way of adding an additional wireless chime to an existing wired doorbell installation? Is there a product on the market that includes maybe a module to add to the existing chime that triggers a wireless chime further in the house? Have a customer in a largish property that is...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock