breakers

Recent contents Top users
  1. R

    Possible to tell which Murray replacement to get without removing the breakers (w/pics)?

    I need to replace two AFCI breakers on our main circuit panel. I have replaced and added breakers to our sub-panel several years ago. When I did so, it was convenient to leave that panel unpowered for more than a few minutes, so I was able to take an existing Murray breaker with me to ensure...
  2. J

    Interlock switch, not powering all of my breakers

    I have hooked up a 30 amp interlock switch to my main panel run off my generator. However, only my light switches work none of my plug-ins have any power. Any input would be helpful. Thanks.
  3. S

    RCD trips with all load breakers open

    My circuit panel has two banks of breakers, each bank protected by an RCD. One of these RCDs has been problematic in that it trips intermitantly. A few months ago it became so frequent that we had the RCD replaced. It would trip regardless of what load breakers were shut or open. No fault could...
  4. R

    Safe/prudent to replace AFCI breakers with CAFCI breakers?

    I am going to be replacing two AFCI breakers after a lightning strike in a house built in 2003. I will be bringing the breakers with me to ensure I get the same brand and specs, but I’m wondering if it would be safe and prudent to replace them with CAFCI breakers (assuming I have a choice)...
  5. R

    Lightning strike damaged 2 AFCI breakers. What to check after replacing breakers and testing outlets

    Background Two weeks ago, lightning struck a tree in our yard. Many circuits tripped and several electronic devices failed. There was a strong smell of ozone/electrical burn throughout the house that has since dissipated. Two AFCI breakers are still problematic. Both serve bedrooms (hence AFCI)...
  6. H

    one 110 outlet connected to 2 breakers on separate legs

    Hi guys , Happy 4th I had a 15 amp breaker trip in my panel when my mother was running her sewing machine. She flipped the breaker back but later when i came home i wanted her to show me which one it was, she couldnt remember so i started flipping the breakers one by one. One of the breakers...
  7. V

    Dehumidifier trips breakers on one panel but not another

    Hi everyone. I have a basement that was finished years ago. The basement is on a separate panel than the rest of the house. For years I've had several dehumidifiers die various deaths in my basement. I thought it was just bad luck, but now I'm not so sure. My latest dehumidifier started tripping...
  8. S

    How to co-ordinate circuit breakers trip for overload and short circuit?

    Can 50A B type circuit breaker be coordinated with upstream 50A C type circuit breaker to trip earlier on shorts and current overloads?
    • SparkyAus
    • Thread
    • ausie elec breakers circuit circuit breakers overload short short circuit shorts trip
    • Replies: 1
    • Forum: Australia
  9. newfutile

    Mixing of circuit breakers

    It's all coming out anyway so it's an acedemic question. Would a Bill consumer unit be comparable with Eaton breakers? An Eaton main switch and mcbs are installed so height differences won't be a problem. I'm changing it for full rcbo with spd board anyway.
  10. M

    How to map circuits when some breakers are quads

    I have a question about mapping circuits in a single family home. I recently had my panel upgraded to an Eaton 2040 panel, and the electrical contractor who did the work did not label things very clearly, so my plan is to relabel all circuits from scratch. As part of the upgrade he installed 4...
  11. soapdoggy

    Were these breakers tampered with?

    Over the holiday period my partner returned home to her apartment with no power. None of the internal breakers in the consumer unit had tripped and so she was unsure what to do. She called an electrician who took the cover off the consumer unit and then showed her these singed breakers across...
  12. B

    underfloor heating and tandem breakers

    Hi, this is a bit complicated. We installed two separate underfloor heating system in our downstairs area. One at 240V and according to the manufacturer at 11.9Amps. The other one also at 240V and 9.7Amps. Because of the lack of space in the 200Amp panel, we connected them to two separate...
    • bob715
    • Thread
    • breakers heating screwfix tandem underfloor underfloor heating
    • Replies: 3
    • Forum: UK Electrical Forum
  13. J

    Is electric panel dangerous?

    Electrician saw white on breakers (see pic) and says I must replace whole panel with a larger one because it’s overloaded and dangerous. Does this sound right?
  14. S

    Panel out of space (need to add tandem breakers)

    I am looking to install a dedicated breaker (20 amp) for a mini-split AC. My panel is full but I was thinking to install a tandem breaker and free up one slot but I wanted to make sure that me adding another breaker with be within the code. 1) My main breaker is 100 amp, however, the panel...
    • sparco
    • Thread
    • breakers out panel space tandem
    • Replies: 14
    • Forum: USA
  15. G

    How do I add a subpanel using three 20 amp breakers with 12AWG from the main panel

    Current Situation: I have three 20amp breakers with 12 AWG in the main panel. Each wire ends in a 3x2.5” metal box along with one neutral wire. There are two yellow wires, a black wire and a white wire. One yellow wire is attached to a 240V outlet and the other is attached to an orange wire...
  16. N

    Solar solar protection for inverter and battery

    Hie. How can I size my protective devices for my solar installations because most breakers keep burning out. I'm I missing something?
  17. D

    Breakers tripping other breakers

    Asked my electrician this question but he never experienced anything like it and did not have any real suggestions or tests. My daughter bought a new condo. We found out that when you switch one breaker off (I'll call it Breaker1) and then turn it back on it trips another breaker (Breaker2) ...
  18. R

    Fused fuse board no rcd or breakers eicr rating

    Hello I live in a rental in scotland and have recently had an EICR carried out. I have an old fuse wire fuse board on a wooden plate with no rcd or breakers, I had assumed this would be a C1 or C2 but this came back as a C3. Surely this is incorrect if the plastic fuse boards are C3s surely no...
  19. T

    Do Breakers trip on irms(total)

    Hi, Say i have a 16A load on a Mains 16A circuit at 230VAC. If its not power factor corrected, then is there a danger the breaker could trip? (due to the reactive current being high aswell).
  20. TheAverageJoeDIYer

    Can I add some tandem breakers?

    I've done a significant amount of wiring in my previous work shop; but just moved to a new location. I have the need to wire up two 220v plugs. When I opened the breaker box I was disappointed to see every slot used! It appears that my box is a V-2813 with a max of 40 circuits. I just want...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock