Hi guys,
Doing a kitchen refurb and adding and extending some sockets and extending the cooker circuit. Builder is going to dot and dab the walls next week just getting people’s opinions on the best method for fixing cables. Clipped direct to the wall or in oval tube or capped?
Also 25mm or...
Could use a few ideas, have this room and I need to get some more PCs in there. Best way I'm thinking is island bench to replace the white freestanding desks. That will be least desk installation work, but I need ideas for getting the cables to that island. Some facts:
1st floor, concrete, no...
Good afternoon ladies and gents, when I install cables as per the title I put plugs and plastic pegs into the ceiling as remember being told years ago you cannot cable tie directly to the mesh? any guidance/ reg references wuld be greatly appreciated.
Cheers
So I'm currently sorting a CU change and kitchen rewire while also fixings some bodges by a have a go client, came back this week to discover that he has decided to insulate the void between ground and first without mentioning it. Now this has derated all his cables by half as they are tottaly...
Ok, so you have a motley collection of old BS3036 fuse boxes that need to be replaced by a new consumer unit. Existing installation tests all good but the T&E coming out of the wall is spread out and not long enough. What do folks do to extend cables or what’s the recognised best practice to...
I have recently moved into a new house and had to reset the breaker after a bulb went. When I was crawling around with a torch, I noticed some cables (Red, Black, and Blue-ish/Green-ish) leaving the main supply and running into the wall without going through the meter or the consumer unit.
Is...
Hi all,
Just being cheeky and asking for some advice really..
In my new house, we have solid walls throughout - great, but not so great for my home cinema kit. My issue is that whilst I would can chase the AV cables to wherever they need to be, I would prefer to do it in such a way that leaves...
Hi guys
Carrying out a rewire on my property and I am hoping to use my old board as it is an RCBO board 8way. However in the future I may add circuits and may have to update the board to a larger one. In order to do this however the consumer unit would have to be moved to an adjacent wall as...
Hi,
Wish to increase loft insulation from 100 to 300mm.
At present lighting and power cables are clipped direct to ceiling joists barely covered by insulation. The depth of insulation planned will cover these cables and I seek a solution. Thanks.
The floor of the kitchen will be filled up with:
1) Concrete, on top of which will go
2) insulation with pipework for wet underfloor heating system, on top of which will go
3) screed.
Can the armoured cable run under the concrete base or does it always need to go above concrete base and under...
Experts opinion required.
Ask to add some addition fittings to a lighting circuit within a shop. Opened up the consumer unit to access the circuit. And noticed the tails from the service head to the meter and from the meter to the consumer unit look very suspicious. I have experience with...
Recently had an extension done. Noticed electrician had run mains electrical cables right on to the hot feed from the boiler which gets very hot. Is this a safety issue? Can the insulation stand the heat for hours on end?..
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.