checking

  1. Oldskoolskater

    Just checking in - UK intro

    Hey All, Just announcing myself as a new member. A former heavy industry electrician (British Steel) for over a decade though now more of a DIY'er. Looking to get some UK specific advice on various domestic electrical best practise, etc. in the future. Cheers Oldskool
  2. W

    Checking proper bonding and grounding for office trailer w/generator power

    Hey guys and gals. We bought a small office trailer that is wired up. It's never seen mains power and uses a generator disconnect (220). I read up on the myriad of code situations for bonding and then grounding, neutral switching etc. and came to the conclusion this would fall under separately...
  3. C

    IR testing - Checking my logic

    Did a check on a ring circuit, due to board having to remain live I did it at a socket.. Was an RCBO, had checked RCD side and all tested ok, when I did IR live and neutral to cpc I got 0Mohms, when I did resistance test got a very low reading 0. something. Now I knew that there was something...
  4. A

    Checking a wire if it's one piece or more

    Hello Say that i had a circuit of a 6mm wire and i want to check of the wire going form the breaker toward the load is one-peice wire NOT two or more wires connected together. Maybe my question is not common but where i live it's forbidden to join two or more wires in any connection as any...
  5. timhoward

    Checking Crabtree MCB compatibility

    I'm working off a photo and haven't been there yet - I think these are Crabtree Polestar breakers in this old 3 phase board? Do the slightly newer design fit that CEF peddle fit? thanks.
  6. B

    Checking a Gtech Battery

    Hello folks, I am trying to help a friend at the moment. My question is, is it possible to check the battery that powers a Gtech vaccuum cleaner. I have a multimeter but I wouldn't know where to start to carry out a test. I have plugged it in and had it on charge for many hours without any...
  7. T

    Cheap device for checking internet connection?

    Hi, Supposing you have a device in the field that is connected to the household router via an ethernet cable (may also be TP links in the path back to the router) . The devices were all sucessfully connecting to the internet at installation time. Some of the units then suffer disconnection from...
  8. P

    Checking a second hand induction hob

    Hi all, A quick question, we are looking to purchase an induction hob and have been considering a second hand option, if one could be found that's almost new. We have found someone selling an Electrolux one, that is claimed to be unused and looks like it is still in the packaging (minus any...
  9. M

    Checking terminations...

    Hi all Could someone please tell me what the regulations are with regards to, 'How are terminations checked for electrical/mechanical soundness in accordance with BS7671'. If anyone has the reg number that would be great. But if not, just what it actually states will be great. Many thanks
  10. I

    Checking Calibration of factory incomer electricity meter

    I've been asked to confirm that our site electricity meter is accurate! Easy on a small site, but 6 cable feed,and a few thousand amps, leaves me short on ideas. To confirm, this is the meter that records electricity usage for our bill. It's a CT style. The meter doesn't give a live power read...
  11. Moley

    Checking the post.

    I've just watched my wife do something that I think we all do but I don't understand why. The postman had put our post through the letter box. There was a small package addressed to the wife. She picked it up and instead of opening it she started feeling the package and said 'I wonder what this...
  12. R

    Earth bonding - checking safety for my mum

    Hi everyone, So, I live a long way from my mother (8/9) hours... And so I only get to see her intermittently. She has had a fair bit of work done by whom I believe to only be a 'handyman', who is also her friend so it's a sensitive subject to bring up, and I want to ensure if I am right to be...
  13. M

    Just checking in

    Just wanted to say hi to all members and big thank you in advance....reading some posts on here it’s unbelievable how helpful you experts are, my hat off to you all for taking the time.
  14. S

    Just checking in

    Hi guys, and maybe gals. I’m a long time HVAC tech, over 20 years. I try and do most handy work around the house.
  15. M

    checking dc current in ac installation

    how do you check if you have DC current in CU for the purposes of saturating a type AC RCD causing it to malfunction.Thanks Mack.
  16. M

    Just checking my understanding of spurs off rings

    Have 18th ed and page 505 does say an unfused spur should feed one twin socket outlet. However if a 13amp fused spur is then connected to this and then to another socket is this not permissible? I can't see any potential for cable overloading? Thanks
  17. M

    Just checking my understanding of min c.p.c csa?

    Hello all Just checking my understanding of min cpc sizing. If installing 20Amp 2.5mm TP&N circuit using armouring as c.p.c. Is 2.5mm from bango minimum c.p.c. Table 54.7 seems to suggest so? Cheers
  18. P

    Checking sockets - where to start?

    Hi. My RCD tripped yesterday evening. I identified that the problem is on the Ring Main (Everything unplugged). When ring main set to on the RCD is triggered. Left all other circuits on over night with no problems. I've got up this morning and just switched the ring main on. No trip...
  19. L

    Checking for breaks On A Long Cable

    Hi all, I know how to check for breaks on short cables from end to end but how would i check for breaks on a long cable ( over 20 metres) using a multimeter? Thanks
  20. pe2dave

    Just checking... Qualified or not?

    Having some kitchen work done. Fitter is sub contracting electrical work. Last year, new MCB resulted in whole house check and appropriate paperwork. I want to keep it that way? What might I ask the electrician (that can be verified) in terms of qualifications, and what paperwork /...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock