I can't find any really up to date threads on whether we have to fit AFDD's.
I am specifically talking about in a domestic premise. I can see that 421.1.7 shows where an AFDD HAS to be fitted (i.e in one of the 4 bullet points), but then it says below ( the bullet points) it is 'recommended'...
About me.
Fastidious about wiring.
Degree in Mechanical Engineering, extremely good spanner monkey (rebuilt engines, gear boxes).
BUT I know my limits and what I am allowed to do according to Part P of the UK building regs etc.
Just been in the loft to do some tidying and found a right rats...
Just a query. As people have been asking me about changeover switches and generators.
If a domestic house already has PV solar, and customer wants a changeover switch in case of powercut… should the supply to the PV be turned off while the generator is running?
Situation;
Powercut.
Customer...
I've been carrying out quite a few domestic extension first fixes recently which involves providing a power supply installed from the properties mains.
I have always just Henley blocked from the properties main consumer unit tails into a 63/80/100A BS-88 fuse Main switch board then from the...
Hi Guys and Galls and all in between and beyond!
I am currently evaluating my options at retraining and have heard that there will be a forthcoming NVQ3 for DOMESTIC ONLY electrical.
Where I live, the amount of industrial/commercial is very small, and the commercial work that IS there, is...
Hi,
I'm a self-build amateur - I'll be running cables and getting system sign-off/inspection by certified competent person, and am just working through circuit design basics.
I'm referring to Scaddan's 'Electric Wiring for Domestic Installers' (16th ed for 18th ed IET), which includes example...
I am currently 10+ years apprentice served industrial electrical engineer looking to do some domestic work, I currently hold level 3 2365 and 18th edition and currently working on my HNC in Electrical Engineering. I am doing to 2391-52 later this year. Is there anything that I am missing or...
UK 2022 based regs question.
Hello, I have a new extension and the builders electrician has required much of the house ( not asked for ) and replaced previously working wiring ( installed 2018) with new.
As a lot of the switches are hanging off the walls and nothing much is working yet I...
Now we used to see a lot of this when we did new build flats etc
But I think this domestic sparks is the first one on Youtube that I have seen use Split Con cable on a house board change
Going to fit an 'boiling' tap for a plumber next week so asked for a pic of the CU and got this:
which is all rather odd. Doesn't affect what I want to do, but the first time I've been B3 MCBs being used and can't think of any reason why someone would choose them over the standard B6
The...
I've had an EICR done on a property via a letting company I use, (they didn't inform us this was taking place), next thing an invoice comes through the door for £180 for a full EICR, and an estimate on the back for £708, for replacement of consumer unit and fault finding for inadequate earthing...
I am looking for options to monitor a home installation for a day or two to find out what is causing suspiciously high bills. Ideally I would want maybe 4 channels recorded for at least 24 hours and to separate the total demand from at least one circuit (e.g. sockets) to help narrow down the...
I have a job which is needing a new CU. What would the general view about a new Crabtree loadstar SPN 125A board being used as a domestic consumer unit. I know it will work, I was just wondering about the inspection and how some may argue it some how not right.
Thanks
Hi
I am going to do some Appliance testing for a Charity shop, could anyone comment on it please, been out of the game for awhile ow, just had my PAT tester callibrated .
no I don't have the 5th edition, will prob get it, but just for domestic items you would find in a charity shop I not sure I...
Hey guys - I am in the process of buying a flat, and just got the electrical installation report. Seeking for feedback on the following:
- THE FIXED WIRING IS IN FAIR CONDITION FOR ITS AGE. THE PROPERTY DOES NOT FULLY COMPLY WITH BS:7671 AS
AMENDED DUE TO THE CODES LISTED ON PAGE 2. THE PROPERTY...
Need some advice. I have a 12meter 24Vdc cable run…. Current 3Amps.
I require a 1.5mm cable 6 core for supplying led strip lights outside due to volt drop.
The cable will be passing through stud work with rock wool insulation fitted.
What 6 or 7core can I use in this install, are there...
Hi Everyone,
I have recently completed my Part P, 18th Edition & Initial Verification course.
I am looking for weekend work in an around Uxbridge (10-15 miles radius) for practical experience. I am generally good with most aspects of electrical installations and would be good as an electricians...
RMS Facilities Management is looking for domestic electricians for the new build housing sector. Send your CVs to [email protected]
Job title: Electrician
Reporting to: Head of Facilities Management
Retail Merchandising Services has expanded the services it offers to our valued partners by...
Hi
As an Industrial electrician for 20+ years
I was wondering what I need to do domestic installations and sign off work. I read some things on part p, but that left me confused as they come and Inspect your work, but I can't start notifiable work without being part p?
Thanks
Neal
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.