Ikea HOO M10s extractor hood. Lights flash on then stay dimmed.
Video of lights turning on here - New video by Matthew Arnold - https://photos.app.goo.gl/2sNSTP2Cq5PrWMcq6 (also attached)
The bulbs are brand new LED bulbs. I replaced the Cooker Hood Light Lamp Switch (suggested by builder)...
Hi to all,
I am struggling to connect up extractor fan Helios ELS-VNC 100. I would like that fan to be switched with lighting circuits and overrun for 6 minutes. Could you advise which terminals should be used for connection please?
Could you explain difference with operation by terminal 1 and...
Good evening looking for recommendations on a decent extractor fan for use in a wet-room? Extractor fan will be vented straight through the wall inside zone 1
domestic wet-room client not bothered about price just wants quality
thanks chaps
Evening all..
I have just been core drilling a 105mm hole for an extractor fan in a bathroom wall. I had a good look around on my pre works visit and realised it was a wide wall (600mm) but my core drill can handle that. Got through 600mm+ and then the customer tell me that there is another...
Doing an Eicr and the 230v timed class 1 bathroom extractor is less than 200mm next to the shower head.
I see this as a C2 and would insist on it being changed to at least a 12v fan or even better a new location.
Welcome any thoughts
Hi there.
Recently our bathroom extractor fan broke, so I got a new one but I'm having difficulty wiring it (homeowner DIY guy here).
So... there are 3 wires coming from bathroom wall:
brown (Live)
blue (Neutral)
yellow/green (Ground).
Previously, old extractor fan used all 3 of those wires...
Hi there,
I'm trying to wire an extractor fan (Manrose 4" / 100mmm with timer)
I don't have too much knowledge about Electricity but I'm very keen to install it myself and learn too.
I don't wish to connect the fan through a light switch rather directly to the wall
Now the fan has 3 connectors...
I've got a CDA ECP62SS/2 extractor fan, can anybody tell me how to remove the lights so I can change the bulb. Also what type of bulb is used in this model.
Thank you
Does it make a difference?
My FILs bathroom fan had stopped working, and after checking power was where it needs to be, conclusion is fan is faulty
“I could have told you that… it doesn’t work!”
The fan isn’t too old, and I’m wondering if the way it’s been mounted is causing too much strain...
Hi all,
I'm looking for recommendations for a kitchen extractor fan i.e. rate of 60l/s.
We're almost finished renovating and we've just been told we have to have one (I know bit late in the day and I'm not happy but we are where we are). There are only a couple of spaces for one to be located...
The switched connection unit for the kitchen extractor fan and the lower part of fan is now behind a larger fridge, so the fan can't be operated without climbing onto a worktop.
I would like to replace the fan with a Manrose LP150STC, which has terminals for a switch on the live line, and bring...
Not specifically electrical, but best way to minimise condensation in a shower room. Asking for a customer.
Background.
Customer is a neighbour. Previous owners of house had broken through between a downstairs WC and a large cupboard and fitted in a shower cubicle.
There is an existing 4”...
Hi. Has anyone tried the Atoko Fan Select (ATQ6-03)? Its supposed to be an extractor fan timer so you can get delayed start and run-on using a standard fan. They say you can also override the delay and run-on by switching the light - does that really work?
Hi my 4 inch centrifugal extractor fan in the loft has stopped working.
Looking at doing a like for like replacement, but am confused with existing wiring vs wiring on the new unit and where the current wires would fit into the new unit.
I've attached the current wiring set up for the broken...
Hi, I need to replace an old extractor fan in a house I rent out. The bathroom has a lot of black mould on the ceiling and I'm wanting to prevent this from happening again. A fan with a humidistat that turns on when it gets too humid sounds like a good idea but is it as easy as just replacing...
i am replacing my cooker extractor motor, the old unit has red, white, grey, blue wires,, the new has red, white brown, black, please help, both are 3 speed,, is there a set order for numbers 1, 2 and 3 speeds, in regards to the wire colour.
thanks dazza
I have just had a log cabin installed, it is being used as a gym.
I have installed an extractor fan to help with the flow of air. The extractor fan is located high up (see picture) and I am wondering where to position the vents to allow flow of air into the room (and then out through the...
I have just done my first workout in my new garden gym. I used my fan heater to get the temperature up to around 12°C which I find about right for a workout. However, the humidity was around 88% which is far too high. There was a lot of condensation on the windows.
My plan was to buy this Rhino...
This Candy CCE16/2X kitchen extractor hood fan is not working, the lights are still working but the fan itself is not. I know there’s a fair bit of grease on there as you can see but will that be the cause & are there any other things I can check myself to find out why?
I am putting in a new transformer for an extractor fan/light and I thought I had finished but the fan works ok but the light doesnt. I have put in new bulb.
I think i must have wired incorrectly
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.