Hi,
I have just purchased a second hand Fluke 1651B Multi Function Tester, which is caibrated and serviced. There was a set of new leads with it complying to GS38, with 500mA fuses in. Everytime I try to take a Ze it blows the fuses.
Does anyone else have a Fluke MFT and if so what size...
Hi was working at a house
Did the testing and packing stuff away into test box and I noticed my green probe missing and the very tidy customer hoovering where I had laid down my leads
Looked but couldn't find !!
Can I just buy the green probe bit or do I have to buy all new leads
It's a...
Has anyone experienced issues with continuity readings fluctuating on a Megger 1730 MFT when the test leads rotate/move in the instrument as is the unavoidable condition when actually using the tester?
I can null the leads but thereafter the reading with the leads connected to each other can...
Sting Ray
Thread
continuity
instrument
issue
leads
megger
mft
readings
using
Hello all.... this is my first post,
on previous NICEIC assessments i have been told i require new test leads, due to fluctuating readings. I know this is caused by dirt and dust, as we all work in a dusty environment, has anybody tried spray switch cleaner to clean the connections on the tester...
Has any of you Megger 1700 series owners, sourced some better test leads for their meter. I'm talking about have to swap ends of the Megger leads when you use something like a Kewtech wander lead or socket tester. I've notice recently, I've had to fiddled with the lead into the tester to get a...
Hi
I have a robin KMP5406DL RCD tester which has a pulg lead to test socket circuits. How would I test
a radial circuit on a RCBO with this tester.
Could I use the 3 leads cable supplied with the KMP4120 loop tester
on the RCD tester? If so where should I test CU or end of circuit and how...
Hi all, I ve just bought a S/H megger CM500 tester, I can't get the insulation resistance test to work, I ve tried various different leads, checked the fuses, changed the batteries and it still won't work.
All that happens is you get 3 short beeps and the symbol of a little man/earth flashes in...
I have recently bought a fluke 1654b but when I do r1r2 it the continuity varies badly is this normal for flukes
Any help would be appreciated im use to metrel testers
Hi All,
i am replacing an old Megger and am currently looking at a 1710 replacement. It is on the net and currently showing Err29.
would anyone know if this is a minor fault or is it a case of a picture taken wit no leads attached please?
hope to hear from someone at their earliest convenience.
All leads including remote probe, 2x mains 3pin leads, croc clips, fuses
inc. fluke cd and manuals etc plus original fluke tester box.
works 100% and only testing as have bought new one.
can be seen working and can meet up if local etc- in Bristol area
£250 OVNO
call mike any time on 07784...
Hi guys
Just wondering if anybody could guide me to the best place to buy a megger 1553 shoulder strap and the croc clips to the 3 test leads as mine have gone missing.
Thank you
Hi,
Im just in the process of making some PAT test leads up, 16 and 32A, 110v and 230v with IEC end and plug etc, just going to make some 415v adapters up and just wonder, does the single Line conductor on the 230v plug end you plug into the tester connect to all three phases in the 415v plug...
Does anyone else have problems with there continuity readings my readings never seem to be stable for example a newly installed ring end to end resistance on neutral and line ill get .46 and then a reading of .04 on line end to end the leads are always nulled and I even check readings on calcard...
I recently purchased a Megger 1552 but there was no Velcro shoulder strap! I have tried the Megger website and also e-bay but to no avail. Any help in locating a supplier would be very much appreciated, cheers Cotty
Hi all I keep having problems with my fluke the continuity readings are all over the shop never stable I always check my readings on a calcard before testing and when nulled I get correct reading i will test it on calcard 5 minutes later and it's half an ohm out so never know if I am getting an...
Hi Chaps,
I have what looks a brand new circutor ar5-l power and network analyzer for sale.
It comes with the original bag, leads and software etc will also throw in a light lux meter and a motor tester for the right deal.
I have fully tested that it is all working and much of it looks brand...
bristolsparky
Thread
for sale
leads
meter
motor
power
sale
software
tester
Hi all!
Apologies if this is not in the correct category of the forum! was unsure where to put it.
I have a Circutor AR5-L power analyzer for sale
All brand new and fully tested and have all leads, software, charger, adaptors and bag plus alot more!
I will throw in a power boss solo motor...
bristolsparky
Thread
for sale
leads
meter
motor
power
sale
software
test
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.