light

Recent contents Top users
  1. N

    Question about the little LED inside light switch 😎

    hello soooo...😅 i recently changed all the light switches in my house. now i saw a video that showed the 2 tiny wires inside the switch should be connected to the "in" and "out" thingies. BUT, before installation, i stick them in a power outlet (witch has a phase and a zero obviously 😎) and saw...
  2. J

    MY ceiling fan does not have light but the fan runs

    My ceiling fan does not have light. couple of weeks the light started blinking then it went off. I did my search and everyone says that I need to replace the wattage limiter. Cannot find any wattage limiter in my unit, there is capacitor and the fan switch. Please see pictures. When I turn the...
  3. markmuk

    Smart wall light switch

    Hi, I recently installed a smart light 2 gang 1 way smart switch. The two lights in question turn on. However on one of the 2 way lights I have spotlights and only one spotlight out of 4 comes on. Previously all 4 turned on. Any advice?
  4. B

    UK 59 volts when light ceiling is off from switch

    HI everyone I'm getting 255 volts between live and earth natural to live on a live lighting circuit fed from 6amp rcbo , When switch off I'm getting 59volts between live and earth Natural to live 59 volts Any idea why
  5. B

    Multiple COM wires slipping from light switch

    Hi, The wiring for my lights have multiple COM wires in most rooms, which are a pain to screw into the COM part of the switch. The switches that were fitted when I moved in work fine, but I purchased a smart switch which has slightly different sized screws / screw holes etc, and I can only seem...
  6. S

    Earthing Light Switch

    Does AS/NZS 3000 require to earth metal wall box behind switch or socket outlet?
    • SparkyAus
    • Thread
    • ausie elec earthing light light switch switch
    • Replies: 0
    • Forum: Australia
  7. N

    UK Light wiring issue - Looking for advice

    Hi all, Replaced a ceiling light yesterday (I'm a novice but confident with basic electrical work). All was well and working, so I turned off the lights and only at night realised the lighting circuit had tripped. Removed the new light today, assuming there was some issue with the wiring -...
  8. S

    Fused Spur feeding socket and a light

    Evening all, I’m looking to install an outside light as a spur from a socket on a ring main. There is already a spur from this socket supplying another socket on the other side of the wall. My question is, where can I apply the fused spur? Do I need to connect the fused spur before current spur...
  9. S

    63 reg Aygo, red oil pressure light on/off why?

    replaced sensor and no change oil pressure test came back normal thinking wiring?
  10. S

    Smart switch for light fixture that uses 12v ac transformer

    I have installed a number of 120v smart light switches and smart bulbs which I have set up on a schedule via an app. I would like to add another smart light switch for a light fixture that has a 120v to 12v transformer inside the light fixture, lighting six 12v (previously halogen) currently LED...
    • supgroup
    • Thread
    • 12v 12v trans fixture light smart smart switch switch transformer
    • Replies: 1
    • Forum: Lighting Forum
  11. G

    Light fitting - CONFUSED?!

    Hello, Thank you for time, firstly. I am installing an LED bedroom light to the ceiling replacing an existing old light / fan. The terminal box that the LED light comes with has 2 openings for me to screw in the wires to. Wires attached to this are blue and brown / black. The mains (coming...
  12. Jtdyson

    Old 2 Gang Light Switch Wiring

    Hi I have this lighting socket but has no markings, does anyone have any idea what is L1,L2 and Com Many thanks J
  13. littlespark

    Specific light switch design

    Customer would like a 3 gang switch replaced with 2 regular plus a dimmer. Is there any grid module set up that fit a 1 gang box? The wall is brick, and knocking out a wider box isn’t an option.
  14. donski

    Help fitting new light fixture

    Made the massive mistake of not taking a photo beforehand and am now stuck with a light fixture that I'm not sure how to wire. I'd removed an old light/fan fixture and had to remove one of the terminals and some wires in order to remove the fixture fully. I've attached the after photo in the...
  15. S

    E27 Light fitting cant find one online?

    Hi I am looking for a E27 fittings to fit my E27 bulb... for a uk standard ceiling light... I have an ceramic one fitted used for incandescent heat bulbs and it doesn't fit my lampshade very well.. Does anyone know a link?
  16. H

    Replacement Light Tube - LED??

    Hey all, So this is probably a quick question. I have some under-cupboard kitchen light tubes that are old and have clearly blown at some point. Would like to replace them but have two questions: 1. In the attached photo, you can see the product identifiers, but an internet search doesn't bring...
  17. S

    LED Tube light fitting

    Hello! Hope you’re all keeping well! I’m replacing a fluorescent tube light which had an electronic ballast fitting - I’ve ripped this out and plan on fitting an LED tube instead. There’s two wires coming out the either end fittings - do I just twist these together and put them in a block...
  18. TonyandCheeny

    Testing voltages on light switches

    Hello guys. I have a question as being in Africa for 15 years, I used to use a mustimeter to check voltages at the light switches as they got neutral and lives inside the switches, however when I moved to England I found out that there is no neutral at the switch as the neutral goes to the bulb...
  19. TonyandCheeny

    Willing to change a 2 way that would simultaneously turn the light on..

    I've got a customer with 2 way switches which I want to rectify it in such a way it would simultaneously control the single light fitting. The original switch only turns ON the light if BOTH switches are ON. The original configuration is the permanent live goes to L1 then when I switch it, it...
  20. Mark Wright

    Why wouldn't this light fitting be dimmable?

    The following light fitting from Dumelm takes GU10 but states "Dimmable No" but I can't see why with the correct dimmer switch and dimmable GU10 Lamps/Bulbs why this fitting wouldn't be dimmable...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock