loose

  1. Jukv96

    Loose Wire UFH + Stairs

    I have a loose wire underfloor heating system I am installing for a client ideally they would like the UFH to continue into the down stairs loo which is off the hallway down 2 steps. It's all going to be tiled and theres no bullnose on the steps. Anyone ever come across this scenario, did you...
  2. J

    Indesit tumble dryer IDC8T3B wire has come loose - heater does not work

    Hi ... I've made a silly mistake by not taking pics of wiring before starting a tumble dryer belt change. I hope someone can assist. I changed the drum belt on my Indesit condenser dryer IDC8T3B, but the heater did not come on and I noticed a loose orange wire next to the controller. The drum...
  3. LewisM

    How does a terminal become loose?

    How does a terminal become completely loose? My uncle had an old school outside socket installed ~40years ago he asked me to have a look as it had been intermittently working recently. I had a look and the L+N terminals were completely loose and the cable came out as soon as pulled, however...
  4. T

    Loose cable, clamp remedy for

    Imagine please a long extension cable with an electric mower at one end and a circuit breaker plugged into a wall socket in an inaccessible place at the other. It is not unusual for me to inadvertently unknowingly put pressure on the system such that the plug or the circuit breaker no longer...
  5. M

    wago is loose

    using wagos on a parralel circuit 480 watts, and unlokc screw blocks i put 18awg in and it feel loose as like it wont pull out,. but u can blow the left n right are they meant to feel so loose?
  6. J

    Loose connection

    Just one to clear up the nonsense I’ve been told that when a loose connection happens it causes a high resistance joint causing voltage drop and heating of the joint. My question is will this cause a breaker to trip. I’ve been told before that due to the added resistance the circuit then draws...
  7. C

    Is loose trunking C2 or C3

    I had an EICR done in 2014. Some loose trunking on a wire to the showers self isolator based on the wall was graded C3. In an EICR done this week the same trunking in the same condition was graded C2. This seems a bit over the top please advise
  8. C

    Moved to a flat aerial socket loose and is not connected ?

    HI i just moved to a flat. The TV reception is sporadic at best and we have been needing to re-tune it every few days. I have tried to look online and all the sockets seem to be wired in and the live wire connected ? Does this look normal ? Any advice would be great thank you. 1590129701 posted...
  9. Q

    Short circuit bypasses mcb and trips submain mcb

    Good evening A cable was loose in a ceiling void causing a short circuit this didn't trip the 10 amp 6ka type b mcb but tripped the 50 amp type b 6ka mcb that supplied that board back at the mains. I am wondering why this occurred other than me thinking the local protection isn't very...
  10. G

    Loose Fill Asbestos

    Any one with extensive knowledge of lose fill asbestos that could give me and idea of I should be getting this tested?
  11. K

    USA Protection against open/loose neutral?

    Hello friends, is there such a thing as a "smart meter" that I can install on my backwoods house that will trip if it detects a loose/open neutral? If so, where can I get one? Thanks very much
  12. Mark42

    Knightsbridge GU10 Fire-rated fittings - Loose push connectors - anyone else?

    Today I'm retro-fitting 21 x Knightsbridge mains GU10 VFRDGIC fittings. They have what looked like time-saving push connectors, similar to Wagos. But the xxxxxxx things don't work! They have two-gang connectors (2xE 2xL 2xN) but when I insert two 1.0 T&E legs into each they don't grip well...
  13. S

    Earth wire loose under sink - advice

    Hopefully a very quick question. Whilst looking under my sink this morning I noticed the Earth wire between the hot and cold pipes is no longer connected. I can't recall if it ever has been but I'm assuming this has come loose and I should reconnect it? If I do connect it should I take any...
  14. S

    Please advise me on safety of loose plug

    Hi, I'm not an electrician or anything of the sort but I'm hoping to just get some quick advice. In moving my bed I accidentally somehow pulled the faceplate of a plug socket loose so now it's at an angle. I won't be able to get in touch with my landlord until the morning so I'm hoping someone...
  15. A

    Shower overheating no loose connection

    Hi all. Shower has melted on top left corner. I thought it would likely be a loose connections on the feed. On taking the cover off the 10mm coming in and connector block looks fine and is tight and I soon realised the burn Mark is from the live going from the block up to the top of the...
  16. Risteard

    OMG - The clueless are on the loose

    Van's in the garage all day so had a look at YouTube. Apologies @Pete999 - I know this is normally your field. Saw this abortion of an attempt at electrical installation in a garage.
  17. S

    Twin&earth and SWA installed loose on floor

    Hi All, The contractor working for Magnet Kitchens at my brother's house has run the sockets ring in 2.5 T&E, plus an SWA for the cooker supply, by laying these cables on the floor under the units. I'm fairly sure this isn't acceptable - at least these cables should be clipped up against the...
  18. Dannyg8810

    Don't you hate it when you loose a bit of kit argggggh

    so the other day i was install 2 400v commando sockets and after I'd finished testing my modular interchangeable bit and handle no were to be seen or found out of a set so no I have to get a new one , Any one else lost anything recently on the job ?
  19. B

    Installation of WarmUp Loose Wire System - How To Fuse?

    Hello folks, I have just finished installing a WarmUp DWS600 loose wire system in my bathroom. A little more on it here, but essentially it's rated at 0.6kW / 2.6 amps. Warmup DWS 600 Loose Wire Underfloor Heating Kit -...
  20. S

    Meter Tails hanging loose.

    Been to a job to see this. I'm guessing that when the old CU was replaced the sparks didn't bother to remove the old meter tails - they were live and just had a couple of wraps of insulation tape round them.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock