missing

  1. S

    MFT1720 missing batteries.

    I've got myself a MFT1720. Sadly it doesn't have any batteries in it. Which batteries go in it ? So I can buy some. Can it be any rechargeable batteries?
  2. O

    Can you spot whats missing.

    Took me a while before I realised, the building is a block of 6 flats, all submains go to each flat with the meter and consumer unit located within the flats for each unit.
  3. loz2754

    What's missing from the Amendment 2 model forms for certification?

    Hi all. I only just noticed this, even after issuing many EICRs and EICs over the last couple of months, but in the Model Forms for Certification and Reporting starting on page 508, something rather obvious seems to be missing. Specifically on page 510 where it asks for particulars of the...
  4. E

    USA Fuse missing from main disconnect panel

    Hi there, I run a recording studio out of an early 50's built warehouse. I've been having electrical noise and ground loops in my audio equipment since I've been here (almost a decade) and I've finally decided I can't deal with it anymore. I'm going to install a new main panel as well as new...
  5. cmars70

    Light in ceiling missing, just 3x grey lighting cable

    The property I've moved into has no light in the lounge, just 3 grey wires (each containing the live, neutral & earth wires) poking out of the ceiling rose. How do I identify which wire does what?
  6. HappyHippyDad

    Am I missing something?

    Just had a phone call from an existing customer. He has just had solar panels put in, along with a very large battery. He has a single up front 30mA RCD main switch in the CU protecting all circuits. Earthing is TNCS. The solar installer has changed the up front 30mA RCD for a 100mA RCD...
  7. A

    Bonding Missing

    Morning all. Just been to a domestic due to a problem on a ring. Found the issue no problem. But when I removed the cover of the CU I noticed a new supply had been wired in for the heating, however the CPC hadn't been terminated and was resting on the MET. So having re terminated the CPC and...
  8. timhoward

    MCB -> RCBO I'm missing something silly

    Simple job, swap an MCB to an RCBO on a lighting circuit. It's got me totally stumped! IR test L+N -> E is fine on the circuit. So is Zs. All 2-way switches operated. Instant trip when changed to RCBO though, and tried two RCBO's Ramp tested them both, all good. All tests pass on them with no...
  9. G

    missing lighting cpc

    Good Evening, I have failed an EIC test, C1 lighting circuit has induced voltage on light switch screws. The lighting circuit is on a split load CU non RCD side only MCB fitted. All switches and pendants have a connected R2 however the CPC conductor present does not connect to any Earth, its...
  10. M

    Adapting CU for dual tariff, am i missing anything

    Hi all I've been ask to change another dual tarriff consumer unit (17 useable ways) I've changed a few of these in past but choice does seem limited and always seem to pay over the odds for what it is. I am considering adapting a dual rcd FuseBox consumer unit. I'm just checking am I missing...
  11. R

    Am I missing something?

    I am fitting a new light fixture. I have done one already and now on the second one. They are exactly the same. It is a dimmer light. It has 2 lives, 2 neutral, and a earth (the naked wires). For the previous light I simply swapped them all out for the new light and it worked fine. This...
  12. A

    Am I missing something here?!

    I'm having a bit of an issue in my own garage which I'm hoping someone will spot what's wrong... Just done a complete refit, new board, lights, sockets all painted etc etc and always wanted a PIR so we wouldn't have to turn the lights on every time we go in! Wanted the light feed out to come...
  13. J

    USA outlet wiring help...something is missing

    I was replacing as outlet..when I disconnected it there were 3 wires being used RED, White and blue. none were connected to the ground so I checked another outlet on the same wall, and saw that only blue and white were being used, again nothing on the ground. White was on the top screw, on the...
  14. E

    Missing grommets

    How would you code a missing grommet?
  15. E

    UK Missing certification for recent rewire

    Hello, I just had my house reqwired by a local company, which did include an actual electrician. They said they would give me the Part P etc. paperwork after I paid for it, which I have. but, it was a couple of months ago now, and they always give excuses about being too busy, out fo the...
  16. M

    DB relocation plan. Am i missing anyrhing?

    Hello all First time relocating a DB and just want to clarify my plans and check if missing anything. I have attached a photo of current DB and and the fused isolator I am intending on using. The main head is being relocated on to back wall where board currently is by U.K power.....there is...
  17. D

    Wiring nest thermostat, I'm missing something obvious here!

    I've had a look at the likes of the following: In summary - run a 5 core from viessman boiler to a nest heatlink. Live and neutral to power it, then 2 cores for the control of it (plus earth). All good, but I can't see a mains out from my boiler? And it matches the board on that YouTube video...
  18. D

    A question to any auto electricians, Toyota hiace van missing immobiliser!!!!!!

    Hi all, I will just start by saying any advice is much appreciated. I recently brought an old Toyota hiace van d4d 2004. Quite quickly it developed a starting problem. So whether the van had been running for a while or starting it from cold it was taking longer and longer to get it to run. I...
  19. UKMeterman

    UK DNO transformer + switch missing HV earth

    An interesting sign has appeared on a local DNO distribution transformer, earths missing from Transformer and HV switch. Is this what is meant by a hot site?
  20. M

    Main cut out missing

    Whats this?.How to code ,absence of main cut out fuse?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock