I'm a DIY'er. Setting up a dual purpose shop-cooling and overspray fan. Bought this motor which reads "1.5 hp" but, looking at the amps, shouldn't it really be closer to 3hp? Anyway, I'd like to be able to slow it down occasionally because it will knock you off balance to walk in front of it. *...
Hi Experts, I was given a Ryobi 240v Table Saw which I think came from South Africa. The motor was disconnected when I checked but I would just like to connect up the motor to see if it works. There are four wires to the motor, two black, one grey and one blue. I don't want to blow it up...
hello, i have a central AC Fan Coil with a 3 speed motor within my Condominium. I run the fan of low but find it blows too much air and produces too much noise when i run the AC (the motor works perfectly and doesnt make noise internally, just the rotation and airflow it produces for my samll...
i had a 3 speed blow motor to an AC fan coil unit. I disconnected the wiring and installed a new unit and forgot how the wiring goes, i no expert and dont want to burn anything out...
from my electrical panel to the blower motor, I have a wire that has 120v, another wire has 40v, and a 3rd...
Hi all. Im looking to replace the carbon brushes on the ABS electric motor in my car that no longer works correctly. Thing is, I don't know how to find the right size and I don't want to remove the motor from the car unless I have the part on hand. I'm looking on Amazon but it seems that there...
Hi all
Back in July last year I installed a new pool pump/motor. The problem is it's now making a humming noise and trips the breaker.
I initially thought it was the capacitor, but opened up the back to find there is no capacitor. Didi a little research and thought maybe it was a shaded pole...
My dishwasher was failing, and I quickly found the problem was a failing capacitor on the circulation pump.
Marked as 2.5uF 400V. No problem, except not easily found locally. So I rummage around and find an old fluorescent lamp with a power-factor correction capacitor of the right value. Well...
Hello Dear friends,
I am going to check a start delta starter for a motor(400KW) which is used for crane and lately it has been causing some issues (Voltage Drop) not sure if the voltage drop is always there once this is started or it goes back to normal this information was not provided. Will...
Hi I am looking for some help.
My Rangemaster cooker hood stopped working sometime ago, I’ve stripped the hood down and degreased the hood. Ive diagnosed the problem to be a faulty motor. I’ve bought a replacement motor, like for like, although the new motor has the same coloured wires but is...
I have a 1 HP Dayton motor model 5k673. It is being replaced with 31TR91. Need help with wiring. I was able to confirm line (L1) abd (L2 230v) Connections, but I have 2 wires left and I am not sure where they go. This is a hangar door, and the wiring is attached to a 3 pole switch...
I posted a month ago regarding a single phase motor + panel I have been given to try and sort following water damage to the panel.
The assembly is a single phase 110v brick hoisting motor and so needs wiring to allow reversing.
There is nothing to work back from as it was all disconnected but...
This is more a challenge to myself and why not for some of you as well. I will try to make it myself alone but... it will be easier and faster with some more experienced help from you guys. As the title says, with logic IC's. I could/should make it with an arduino or my favorite PIC12F508...
Hi all,
I’ve been asked to run a cable for a 3 phase DC motor. Not having much experience with motors would you work out cable sizing the same?
In the picture attached are the details I have received.
Any help would be great 
Hi, this might be an easy question, but i need to power a single phase motor situated about 300 meters away from my MCC. Do I just run 3 phases 415VAC cable to the motor in the field and just connect one live phase and the neutral to get the 240VAC? if that's the case then what do I need to do...
Hi
I'm having a problem with a 20 HP pump motor from a hydraulic press to try molds.
When we energized the machine, it starts with star correctly but when it changes to delta, pump motor stops. The breaker doesn't strip and fuses were ok.
Video (clockwise rotation)...
Hi guys,
Been given a motor and associated control gear within a panel that has been water damaged.
This motor has 3 windings U1/U2, V1/V2 and Z1/Z2, 1 pair of wires for the brake and 1 for cut-out I believe.
In the process of wiring a new panel up for it and it know its a long shot but can...
hello!!
hope anybody can help me.
I have an AC single phase 220v 1.5HP motor that won't rotate when plugged in even when I try to do it by hand, it is kind of magnetically locked, and just hums.
when unplugged, it rotates easily.
I tested it with a new capacitor that I'm 100% sure is OK (I took...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.