multiple

  1. J

    Multiple Occupancy sensors. {More than 3}

    Hi all, I just found this forum last night and figured I would post my issue since I can't find much out there with a similar situation. My job is to light a big garage area in basically a basement. The caveat is that the house is in a flood plane. The county flood plane at this house is 5'...
  2. C

    remove switch from multiple outlets

    Recently moved into a house from the 70s. There's no ceiling light in the living room. Assuming the switch for the room was to one of the outlets for a lamp. After testing to find which outlet it was, to my surprise, it was all of the outlets in the room. Yes, One switch turns ON/OFF every...
  3. nickyp_uk

    Multiple lights and power socket not working but no blow fuses - any ideas?

    Hi all, I'm wondering if anyone might be able to help. We have a fused switch that controls 4 LED lights next to a power socket which have both stopped working. We have tried replacing the fuse in the fused switch, but that hasn't resolved the issue. Reseting all fuses in the fusebox hasn't...
  4. D

    Power source to multiple wafer lights then to switch?

    Hi all, I'm wondering if someone can answer this question concerning a wiring scenario. I recently saw on a youtube video - a guy create a scheme where the power source first went into a light then went to the light switch. Is this safe for series of 6 wafer lights (6 in.) 75W 1140 lumens...
  5. StefanL

    Connecting multiple drives to only one adapter/transformer

    Hi everyone, I have several external disk drives, all from the same manufacturer and all using the same type of transformer - input 220V, output 12V, 1.5A, 18W. Currently I plug them all in a multiple socket plug the length of a Dachshund:)) and it looks just horrible. Is there a way to have...
  6. P

    Diversity and multiple consumer units

    Hi everyone, A diversity question concerning 2 consumer units fed from 100amp DNO supply Background, So I have an 18th Ed compliant consumer unit (DB1) fed by a 25m 2 core SWA into a IP rated box, the SWA is then split into 2*25mm tails feeding DB1 and a small 3 module enclosure incorporating...
  7. aidanmcg33

    One external source split into multiple zones

    Our house has one external feed going outside to power lights. We've recently renovated our garden/drive etc and now there are three different zones where we would like to have lights and control when they are on/off. With one source going outside and one switch, I was wondering if there is...
  8. C

    Spds - multiple consumer units

    Hi all, what is the best way to configure surge protection in domestic dwellings when you have multiple consumer units? Does each consumer unit need it's own spd, or can I fit one in parallel with all consumer units? I have a 20m run from meter cabinet to two consumer units in house, then...
  9. T

    Electrical certificate with multiple installers

    Hi all, how do you go about filling out a EIC or a minor works certificate when you have multiple installers that have worked on the circuit, there is only one space for installer/constructor?
  10. M

    USA Ground wire(s) in multiple conduits between sub panel and j-box

    At long last my wife is getting her new kitchen and the contractor will be running 10 or so new circuits from a new sub panel. The sub panel, unfortunately, is on an outside wall around 35 feet from the kitchen. The wiring will have to go down the wall, into the crawlspace under the house, and...
  11. CyzfromTaz

    Toyota hiace multiple electrical issues

    Hi, I have multiple electrical issues with the hiace I just bought (not sure if they are related). The fan (AC) is not working as well as the hazard and reverse lights and the honk. It looks like all fuses are good. Any advices on how to tackle those issues would be greatly appreciated. Cheers
  12. A

    Wiring Multiple VFDs off Dryer Plug for Multiple 3-phase Motors

    Posted this to the DIY section since I'm not a business or employee in this matter but it feels more appropriate (and might actually get responses) here. Hi all, I'm new here but have posted on Hobby-machinist and Practicalmachinist forums. I want to wire up an electrical box for a milling...
  13. G

    Wireless switching of multiple receivers?

    I'm looking for suggestions, please (as a retired electrician but still active in the voluntary sector). The scenario is a group of 4 log cabins, sleeping accommodation for groups of youngsters and their leaders at an outdoor activities youthwork charity. I've recently completed the electrical...
  14. M

    Any best practices on installing/wiring configuration of multiple LED panels?

    Anyone could recommend "best practices" for wiring methodology of 64 LEDs (each req. 10V@700mA)? Including resistors, drivers, parallel/series, etc... Part of the question is if these should be configured in an 8 x 8 configuration where each one bundle is a 4 x 4 series/parallel setup? Drivers...
  15. B

    Multiple lights went out at same time. Supply issue?

    I have had no issues until this week. The lighting in my basement all has gone out. This includes my laundry room, basement game room, and the bathroom. I thought that it was just a blown fuse but no fuses were tripped. I checked switches and bulbs and ruled those out. I still have power in...
  16. A

    Multiple hdmi over cat 6 to multipe tvs

    Hi guys, looking for advice as not done this before. I'm looking at wiring multiple devices ( sky/ VM box, PlayStation, dvd player) in a cupboard and want them on 3 tvs ( bedroom, lounge and dinning room) would a 4 in one out hdmi splitter work with a hdmi over cat 6 extenders with ir remote...
  17. D

    I Need Work Electrical Jobs across multiple locations

    Job Title - Electrical Engineer Location - Surrey, Hampshire, Greater London, South East Role summary Job Type: Full-time, Part-time, Contract Salary: £34,000 – 50,000+ OTI per year Call - 02036407075 To work on various projects across West London and surrounding areas. You will be a key...
  18. V

    Multiple sub mains, how would you do it ?

    This is a question with probably so many answers and solutions, but I wondered how people would do it. I have a clients house which already has one submain on a 40A MCB to a Garage with a 20A RCBO radial and a 6A RCBO lighting circuit + a spare 32A RCBO. Selectivity not an issue. They need a...
  19. acursi15

    Wiring help for multiple lights and one power source.

    I've been having issues with my dining room lights flickering and light switches working intermittently. After taking off the switch covers, I didn't need to be an electrician to see stuff was wrong. There were exposed wires, red wires attached to black wires, black to white, and so on. I've...
  20. H

    Multiple circuits passing through an AC isolator

    Multiple circuits passing through an AC isolator what code is this on a U.K E.I.C.R?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock