pat testing

  1. M

    checking dc current in ac installation

    how do you check if you have DC current in CU for the purposes of saturating a type AC RCD causing it to malfunction.Thanks Mack.
  2. S

    Megger MFT 1741 problems!!!!!

    Hi have had the megger 1741 MFT. Error code 140 has appeared on the tester which is a fault on the circuit board for the 3 lead low zs test This is the third time it’s happened, already sent it of twice to be repaired since buying it from new just over a year ago. Was wondering if any one else...
  3. E

    Pat testing business setup

    Hi i been looking at starting a pat test business, there is a course i can do that follows the iet 4th edition and certificate test at completion , if i want to do tests in places such as care homes and other businesses , will these ask for a qualified electrician or a city of guilds qualified...
  4. J

    in service inspection and testing 5th edition

    Does anyone know off hand when the 5th edition is supposed to come out, with the lockdown I can't get an official response. The draft "in service inspection and testing 5th edition" was out late last year for comments, and as I haven't got a copy of that, I don't have the timescales that were...
  5. J

    PAT testing 32A cable

    We have some 32A extension leads that range from 5m to 20m, I'm struggling to find what the acceptable values are for the resistence test. The PAT tester has a built in calculator, but that only goes up to 4mm cable, this is using 6mm. Where can I find the information I need to get the pass...
  6. J

    Mis wording in guidance 3

    Evening all Currently studying to take my 2391 course, in guidance note book 3, page 23, 553.2.2 it says "Particular attention should be paid to the requirements for cable couplers to ensure that the connector (female part) of the couplers us fitted at the end remote from the supply." Surely...
  7. N

    Trimble fast test - new laptop

    Hi there, I've got trimble fast test and looks like my laptop is starting to make that decline to the kaput stage of its life. Seeing as I've time on my hands I was going to buy a new laptop and transfer all my info over before it lies down on me completely. Do any of you know would I need...
  8. J

    NICEIC Certification Scheme PAT testing with NICEIC

    Hi there. As I understand NAPIT approved contractors automatically are able to carry out PAT testing with there yearly subscription. Do NICEIC approved contractors get the same benefit? I'm currently just a domestic installer and would have to pay an extra £450+VAT per a year for PAT testing!!
  9. A

    couple of PAT testing questions

    Hi Everyone, I have recently bought a UNI-T PAT tester ( UT528) and have few questions: It is mentioned in the handbook, to limit the earth continuity test for some appliances such as TV between 20 and 200 mA. When I check the UNI-T operation manual, it is mentioned the test current for earth...
  10. steamboatwilly

    Two new Wylex RCDs both failed tests

    Folks, A bit baffled (not difficult) ... added a light switch in a rental this week (empty property so no social distancing issues) and checked the RCD before I signed off. It was a Wylex 80a 30mA and it failed all tests (inc. ramp) so I like-for-like replaced it. The new one also failed all...
  11. EricMark

    Domestic inspection and testing what is required? England-Wales

    When I bought my house we had it inspected before buying to highlight faults, so the inspection and testing done by RICS Chartered Surveyor and the report made. This clearly covered more than the electrics, but it did refer to the electrical installation so included a type of electrical...
  12. E

    Testing of domestic property.

    Had a chap around yesterday evening to give me a quote for some plasterboard work. Seems he also has recently qualified in his testing capacity. Without naming names here is his profile " i have been in the electrical trade for 9 years, I qualified 5 years ago and passed my testing and...
  13. dnjr

    Fluke 1663 multifunction tester error code 4

    Dear all Testing Zs on fluke 1663 returned an error code 4 I thought this was an earth fault but another spark said it’s a voltage on the line. Anyone have the correct answer ? Cheers
  14. Pete999

    My Sister in Law is having her kitchen extractor remodeled, what certi ss required

    My Sister in Law is having a new extract fan installed due to an obnoxious Neighbour complaining about cooking smells, She is having a builder to install a new fan and ducting, What Electrical certification would be required? me I would say a MNEW cert and an ISITEE as well what say you lot? I...
  15. I

    Testing and signing off mobile catering units.

    Hi all, A friend of mine wants me to help him out renewing/converting trailers and horse boxes to be used for catering of film sets or in the public. I've got all the info I can get from Section 717 but what I'm not sure about it to what level I need to test and how certifying comes into play...
  16. D

    Polarity Test - Extension Lead (surge protection) - Failed

    Hi all, This has got me stumped as it's the first time in 8 years this has happened. I undertook a 250v test on a brand new recently purchased Surge Protection extension lead - all is well but on each of the 6 sockets it failed the Polarity Test. Tested the IEC Lead and all was fine so not that...
  17. Q

    Insulation resistance with vulnerable equipment unable to be removed

    Good evening Was wondering when testing for.insulation resistance and there is vulnerable equipment in circuit but unable to disconnect, I understand that you combine the line and neutral conductors and test to earth. I am just wondering if it's ok and safe to do this at 500v as there is no...
  18. B

    Hi from the UK

    Hello folks, my name is Matt, I live in Cambridgeshire in the UK. I started working for a scientific maintenance company in October as their new Storeman. I was asked to look at the PAT testing equipment and familiarize myself..(a Seaward Pat Tester 250+). I have done the Pass/certificate on the...
  19. Q

    Do you test the continuity of an installations main incoming earth

    This may seem like a stupid question but when testing for continuity using the long lead method I know you test the water and gas bonds etc but do you test the incoming earthing cable. I ask this because reading guidance note 3 it talks about the earthing conductor to be tested and I am slightly...
  20. B

    Basic PAT Testing question

    Hi there, Excuse if a daft question but should PAT testing include all spare cable and chargers ? ie we have several boxes of unused spares (laptop chargers etc) which are likely to never be used but kept just in case. I presume they should be tested as they could be used at any point or...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock