programming

Recent contents Top users
  1. O

    MX Pro 5 fire alarm panel programming

    On this commercial building we are refurbishing it has the above fire alarm panel which I think is pretty much brand new, I'm not even sure it was ever fully installed as we found half a drum of FP above the ceiling, but by the time we arrived on site much of it had been gutted and cables...
  2. G

    Learning to program a VFD

    So i have wired up my VFD, turned it on and all funstions appear to be running. So reading the instruction manual i get that i have to program each function to run the 3 phase machine i have, but i am a little confused. The VFD also has a manual configuration panel that is separate from the...
  3. _q12x_

    23LC1024 Memory programming

    Hello again with another small project. I followed this video tutorial and I also buy that 23LC1024 IC RAM she is presenting (5pcs from aliexpress under 10$) She(the instructor) is providing the arduino project file is using in a link in the video description. - that is what I used. Here is my...
  4. F

    Wanted Deep Sea Electronics DSE808 programming interface, for DSE530 genset controller

    Looking for a Deep Sea Electronics DSE808 programming interface, to setup a DSE530 genset controller, for purchase or hire. https://www.deepseaelectronics.com/genset/expansion-modules/dse808/downloads/datasheet/654 It's a now obsolete, RS232 based active cable.
  5. J

    which of you is engaged in programming?

    Guys, which of you is engaged in programming? How did you come to this and what teaching aids did you use? I would like to hear advice from experienced people. I will be glad to feedback.
  6. T

    Honeywell key fob programming

    Hello, I am having difficulty programming my Honeywell 5834-4 key fob. I am using a Honeywell 21ip with a 6160RF receiver. I am able to program the stay button on loop 4 using both *56 and *58 programming modes but when I try to program alarm away I get an error tone when I press * to accept...
  7. J

    Programming key switch on an accenta G4

    Hi can anyone one run through how I program a zone as a keyswitch on the accenta G4 alarm it has the remote key pad. I've installed a Konnected wireless interface which has a relay for setting the alarm from a mobile but I can't find the instructions for setting the zone as a keyswitch in the...
  8. Leesparkykent

    Texecom premier elite 24 programming zone names

    As above really. I normally set them up using wintex and it’s a easy....How ever I’ve lost my lead and couldn’t get one locally today. I’ve set it all up using the RKP and works a treat, the only thing I’m struggling with is naming the zones like landing, entrance, main office etc. is it...
  9. kropaske

    Texecom 24 programming

    Hi Guys/Girls I've installed recently Texecom premier elite 24, very basic setup: 1 door contact, 3 PIR's downstairs and 1 PIR upstairs all wired DEOL and set as Area A (B is reserved for garage), 1 keypad, 2 external sounders, SmartCom module, all works fine but need bit of advise on...
  10. D

    OMRON PLC Help programming extension

    Looking to see if anyone could help with programming an extension onto the omron cp1l-em40dt1-d. program has already been written however the person who wrote it has left and i have only done work with siemens. any help would be great!
  11. Chris Simm

    Hello from Scantime Automation & Training!

    Hi guys, thought i'd introduce myself as i've recently joined the forum on behalf of our company Scantime Automation and Training, hoping to help anyone who is working with or is looking to work with PLC Control Systems on the shop-floor! My name is Chris and i'm a Controls Engineer as well as...
  12. R

    NOBO NCU2T programming-please help

    I have the instruction manual for this programmer attached to a stand alone panel heater but what on earth do the pictograms mean where there is a plus sign, a picture of a pencil and one of a dustbin. Nobo tell me that is all they have from the Norwegian manufacturers. Can anyone please provide...
  13. D4v1dSm1th

    [Fire Panel - MX4100 programming] Connecting panel to PC via USB.

    Hello electricians, I got myself an Mx4100 fire alarm panel about a year ago from a relative, I unistalled the panel, got yards upon yards of FP200, many sounders, call-points, smoke/head-heads, for which I all know how to wire on the panel more than fine, but, one issue arrised - the Level-3...
  14. J

    Omron plc cpm2a

    Hi all anyone have any programming experience with omron plc i have a few questions if anyone can help .
    • Julian Sanders
    • Thread
    • attach before plc program programming using
    • Replies: 11
    • Forum: UK Electrical Forum
  15. A

    Rointe radiator programming

    Hi guys, I've got these rads in my house, and they're pretty good, but a pain in the boot to set up and program. Sure if I took some time I could get in a rhythm but I'm thinking of a long-term solution. Being a bit of a programmer, I'm looking at reverse engineering the remote control...
  16. L

    PLC programming knowledge

    Evening all, could anyone suggest a starting point for me in which I could start to read up and gain some underpinning knowledge on PLC programming as it's something I am interested in diversifying into, as I prefer the industrial side of work and it interests me. I've realised that if I'm...
  17. س

    Need help at Emergency central battery

    please i need your help to understand how can i make maintained or non maintained emergency luminaires . i want to ask about programming of CPU in ECB. is that responsible to make maintained or non maintained emergency lighting or not ? if not tell me what is using of this programming in CPU...
    • سلطان سيف الدين
    • Thread
    • battery central emergency maintained need help programming
    • Replies: 4
    • Forum: UK Electrical Forum
  18. D

    Plc Programming

    Hi I am looking to do a short course to Learn how to programme plcs. I have done a Hnc with a module on plcs therefore have a basic grasp although as my industry requires me to engage with controls and instrumentation, brushing up on my Plc skills would be useful without paying money to cover...
  19. C

    Renault laguna abs/ecu fault

    Hi all, hoping somebody could possibly help me on this one. I am going to buy a second hand abs unit with same model no for car etc but will I have to get Renault to re programme the module to the car?? Renault abs units are £1200 with programming!! Many good one's one e-bay for £45 ish. Have a...
    • cotty
    • Thread
    • appreciated fault later programming usually
    • Replies: 23
    • Forum: Auto Electrician Forum
  20. joel89

    Allen Bradley Powerflex 40 Inverter Programming

    anyone ever programmed these or had any expierence with them ? i cant get it to work on the external selector switches for forward and reverse can anyone shed any light on what paramters need changing? have very little information R.S very light on info...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock