receiver

  1. HappyHippyDad

    Would this work - back feeding a quinetic receiver?

    I am installing some driveway lights. The customer wants to be able to switch them on from t he house, but also have a PIR at the driveway entrance. Getting a cable from the house would be extremely difficult so I would like to use a Quinetic switch. My plan was to do the following (see...
  2. O

    Replacing old heating thermostat receiver with Honeywell DT92E receiver

    Hi there, We have recently replaced our central heating programmer with a Honeywell ST9400C. We now want to replace our old wireless room thermostat with a compatible one. We've purchased Honeywell DT92E (with receiver and controller). Next to the boiler, underneath the programmer, is an...
  3. I

    I need help wiring up a Quinetic 2 gang receiver switch

    Hi All, I am looking to install a Quinetic double gang in line receiver switch (QURS2W) in my hallway on the ground floor to control the lights in the hallway on the ground as well as the first floor. On the first floor, I propose to pair up a 2 gang Quinetic switch. The wiring is all old and...
  4. M

    Second Wifi receiver.

    Can I use a second receiver to start my underfloor heating zone valve?
  5. S

    Lora transmitter / receiver amd solis hybrid inverter

    Evening Does anyone on hear know how to install the LoRa Wireless RS485 transmitter and receiver pair with a Solis hybrid inverter ? I’ve been told it’s compatible just insure how to install it. Can anyone help ?
  6. S

    Why is MCB tripping after replacing Honeywell controller with Tado receiver

    Tried replacing Honeywell controller (ST6400C) with Tado wireless v3+ receiver. After switching the power of on, the Tado controller lights up and connects to WiFi. However, when the hot water or heating is activated via Tado app, the fuse in the central heating circuit blows off and the MCB...
  7. A

    How do I disable the Salus rf receiver in the Eco Elite 30 Combi

    Hi all, I've installed a NEST onto a Eco Elite 30 combi that has a Salus rxbc605 (I think) unit installed - I removed the link between bk1 and bk2 near the main power terminals and wired the NEST switch wires into here - the NEST works but only when the Salus is on, but when the Salus tx shows...
  8. mattg4321

    Quinetic Dimmer Receiver QUR301

    Anyone had much luck with these? I fitted 2x to the same circuit that had been working fine for weeks with the standard Quinetic switch QUR303. First one gave disco effect and wouldn't turn off. Button on receiver turned red led indicator on and off but no effect on output Second one never...
  9. S

    Ceiling fan receiver unit

    Hello, can anyone give me advice on how to connect wiring for ceiling fan in the UK with receiver unit please? Please see attached files. There are stickers on the 4 wires as follows:- Red - L Black - N White - Light Blue - Light I have also attached the wiring diagram which I don’t...
  10. S

    Quinetic receiver and LED strip

    Hey, I'm looking to add a quinetic switch to control a led strip for under kitchen cupboard lighting. The quinetic receiver is 6A so I'm wondering what transformer I'd need to feed the LED light strip? Many thanks in advance.
  11. D

    Digital 2 channel super-het receiver installation

    Hello, I recenlty build a new horizontal sliding garage door. I installed the mechanism with no problem following the manual, some parts were hard but i finally managed it. So, the door i want to talk about is the second door there is at my property, so i asked at the store if it's possible to...
  12. T

    Can I ground a turntable to a receiver with no built in ground wire?

    I just bought a used Ion Profile Pro turntable with no ground wire. I'm getting hum, and based on my research I think I need to ground it to the receiver. Any suggestions on where to attach the ground wire to the turntable?
  13. J

    Changing salus receiver to hive

    Hi i need to change my old salus receiver to my new hive one and im not sure about the wiring do i put it all the wires in the same places on the hive receiver? The picture is the wiring into the old receiver
  14. F

    Need help wiring up hive receiver

    I have wired up my Hive receiver to the boiler and have also signed up to the app. On my app when i turn on the central heating the light on the hive receiver for central heating comes on showing green solid, however the heating does not turn on although the light for the receiver is on...
  15. Keyur Patel

    Quinetic WiFi Wireless Receiver

    Good Eveing guys! Just wanted some advise on the Quinetic WiFi Wireless Receiver. I have installed 5 of the units in a property in Harrow which was grade 2 listed. the client wanted a chandeliers installed but wanted them to be switched independently! can't chase the walls to add an extra...
  16. R

    Wiring a Hive receiver to a Vokera Linea Combi boiler

    Can anyone please help me to wire a Hive to a Vokera Linea Combi Boiler I have uploaded diagrams and pictures of everything I think is important. I think I should 1 Disconnect the Honeywell thermostat and bridge the two connectors where it says Room Thermostat on the wiring diagram. 2...
  17. R

    Hive receiver installation on Vokera Compact A Combi

    I'm trying to install a hive active heating into a Vokera Compact A Combi boiler. I think I understand the principles of the system but am looking for support on wiring the receiver to the boiler. The boiler electrical diagram can be found here http://qr.vokera.co.uk/qr?code=20099226 (figure...
  18. A

    Help to wire up hive single receiver to valliant.

    Hi all, Firstly, I apologise for asking for help but I’ve been massively let down by a plumber. I’ve had a new valliant ecopro 30 installed. It’s got 2 zones (2x 2 port valves) 1 for UFH and 1 for Radiators. The plumber has not wired anything and the electrician is struggling now. He’s wired up...
  19. N

    Hive receiver connections to Vaillant boiler

    I have a Vaillant EcoTec Pro 28 boiler and a Vaillant mechanical thermostat (unsure of the precise model) and I’m thinking about installing hive to be able to access the remote switching feature and also to able to place the thermostat where I want it rather than where the installer thought it...
  20. Jamie'

    Hive single channel receiver wiring

    Hi all, Looking to wire up a hive receiver but never done one on a job before (just finished 4 year apprentachip flat/house bashing mainly) so just want to check I'm going to be doing it right before going ahead. So i was going to run a 3 core T&E from the boiler to the receiver. So at...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock