seperate

Recent contents Top users
  1. Simon-0116

    1 x inline fan and 2 seperate toilet

    Customer has a toilet block with 1 inline fan currently doing 1 toilet only. Set up as follows Pir turns lights on and last light turns fan on. Perm live to fan. Now they want 2nd toilet on same fan...
  2. D

    Two seperate +12V Outputs - When Turning left or right

    Hi I have Toyota RAV4, 2010 I have question for you, I am going to install two mirror cameras to turn on when turning lights are on (left camera to turn on, when left turning light is on and right camera to turn on when right turning light is on). To do this, I need to detect positive 12V...
  3. I

    TWO WAY SWITCH, SEPERATE LIGHTS

    Hello, I have a double light switch in my entrance way and it was only connected to the hall light. I have since added a second independent light to it. On the switch they work fine independently. But when I turn one light on the other turns off. Ahhh Can someone help?
  4. M

    UK Is a seperate FCU required for spur?

    Hi all, I am looking to add 2 spurs off a ring main socket and the 1st is a 3 gang socket with a 13A fuse (see pic). The 2nd will be 2 gang. Will I still require a seperate FCU or will the 3 gang socket fuse cover this requirement? I beleive it will but just want confirmation. Thanks.
  5. davesparks

    When did seperate earth's in trunking become fashionable?

    Next question on the date my install game. When did the practice of installing seperate cpcs in trunking become the norm? The 'original' part (the rewire when the VIR was replaced) of the install I am trying to establish an age for is entirely in enameled trunking which has been used as the...
  6. M

    UK DIY. Can anyone help me understand why this complex arrangements of wires are connected this way from these two seperate meters

    Is this dangerous ? Thank you for any advice given
  7. C

    Separate feed for Cooker and Induction hob

    Evening gents After a quick question about a kitchen rewire (Im an industrial electrical engineer, not been a house basher for a good 15 years) Im moving the cooker from one side of the kitchen to the other and running a brand new supply from the consumer unit. Im also moving from Gas hob to a...
  8. S

    Emergency Lights On Seperate DB

    Hi guys came across something I've not seen before and has me puzzled. I've tested quite a few emergency lighting systems over the years but I'm working in a older church with the emergency lighting supplied from a individual consumer unit wired in Pyro. The rest of the Installation is split...
  9. leep82

    Seperate RCD enclosure

    Ive recently been out to look at a kitchen refurb, where a split load mem memera 200 consumer unit is installed. The ring final circuit supplying the kitchen has 30mA RCD protection, no issues here. My issue is the oven supply. The OCPD is a 32a cartridge fuse which is on the non RCD side of the...
  10. P

    2 gang light switch on seperate circuits?

    As per the title is there technically an issue with having a 2 gang light switch with one switch on the lighting circuit and the other on a ring circuit (via an FCU). The ceiling light is on the light circuit and the wall lights are on the ring circuit. This isn't something I would personally...
  11. T

    Seperate circuit passing through light.

    We are rewiring a stair lighting circuit and the door entry supply passes through one of our light fittings which is a seperate circuit from the lights. Is this ok if it is marked up at the DB?
  12. I

    seperate light circuit not going through main isolator on control panel

    Hi just wondered if someone could clarify the regs for me,got a control panel feeding a machine isolated by a three phase isolator which also turns the lighting off ,but we need the lighting to remain on when the isolator is switched off,what are the current regs regarding this thanks
  13. Andy-1960

    Seperate / Integral earth CPC on 400A supply

    This one might get the old grey matter going! 400A supply 260m run on ladder fed from BS88 fuses to sub main distribution board. Did a cable calc using our Trimble software (was Amtech) and looked at the option of using an integral earth or a separate earth so I could use a conventional 4c...
  14. Doomed

    Advice on seperate things.

    1) We have been asked to tender for general maintenance, 5 yearly tests and other bits on several sites around our area, when reading the 3 page list of requirements I came across testing of lightining protection - never done it before - I know that its BS EN 62305, but what do we NEED to do...
  15. D

    Garage Supply - 2 way metal consumer unit in a seperate garage

    Hi, I'm installing a 2 way metal consumer unit in a seperate garage, the earthing arrangement in the property is TNCS. I am planning to install a new 4mm2 ciruit from the main consumer unit in the house, in 4mm2 swa to a garage consumer unit (5M run of cable). There are no extraneous-conductive...
    • Dunc88
    • Thread
    • 2 way consumer consumer unit earth garage house metal seperate supply unit
    • Replies: 31
    • Forum: UK Electrical Forum
  16. P

    SWA seperate CPC

    Hi guys, how would you code a SWA cable which feeds a DB within a commercial unit with no seperate CPC so only realying on the SWA strands as means of CPC
  17. S

    couple of questions regaurding seperate cooker and hob

    Looked at a job earlier something which ive yet to come across but presume its pretty common. The current freestanding cooker is wired on 6mm T & E on a 32a mcb. Customer doesn't want any of his recently laid carpets lifted and theres no route with out lifting any. With diversity his new cooker...
  18. R

    Seperate Isolator needed for machine or not?

    Hi I have a machine that I will be installing at the weekend, it has its own rotary isolator on the front panel and just can't decide if it will also need its own local isolation too. If i fit local isolation because of the route that i'm bringing the cable down (to the right hand side of...
  19. O

    20mm PVC conduit crossover / hopover?

    Don't do much conduit work...finishing my garage wire up and socket conduit needs to hopover the light circuit conduit. Can you buy these ready made or is it a case of bend your own? *tin helmet on*
  20. N

    Buying Tools Seperate vs Kit

    I'm starting the 2365 level 2 course in September and I'm required to have a basic installation kit. I've seen this kit : http://www.NoLinkingToThis/p/ck-electricians-premium-tool-kit-bag/35475 I'm wondering if I should buy a kit like this one or buy tools as I go along and I'd rather spend...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock