switchgear

  1. J

    500kW Generator tie in

    I'm an electrical engineer in training so please bear with me. Basically, a bank has ordered a second 500kw diesel generator and my job is to design the infrastructure to allow them to run simultaneously. It has been suggested that a "Paralleling switchgear" be used that could potentially...
  2. Lister1987

    Switchgear Brand Identification

    I'm working on a 'what brand is this mcb, what works with it, who sold it, this brand is made by...." type thing and could use hive mind input At the minute it's just images of mcbs with brands on but anything I can get about each one will really help, looking to make a single resource for...
  3. Mark W

    Vintage switchgear restored and installed to form part of my living room.

    Afternoon All Some of you may be interested in one of my projects. I have nearly finished a themed room at my home and we have used some vintage switchgear as part of the decoration, I just need to finish off the skirting board. The next stage is to wire up the semaphores so that they operate...
  4. w0z

    Recall: Proteus Switchgear - 100 Amp Double Pole Isolator - which might not isolate.

    Disconnect once check twice..(or more) Found HERE at Trading Standards Risk level Serious Risk type Electric shock Risk description The fault was identified during routine installation process which includes a test. It was found that the switch did not isolate the circuit. The product does...
  5. Marvo

    Low-Voltage Power Switchgear and Controlgear Assemblies - A guide to the requirements of BS EN 61439

    Marvo submitted a new resource: Low-Voltage Power Switchgear and Controlgear Assemblies - A guide to the requirements of BS EN 61439 - Type Testing Read more about this resource...
  6. Gavin John Hyde

    Shortages of switchgear

    Have any of you had issues getting hold of switchgear at the moment? Around here some suppliers have got issues with shortages of Lewden boards and devices. they said they are not the only ones with supply issues a the moment. The fusebox brand is in short supply locally. Denmans/Rexel have...
  7. N

    Panel builder suppliers

    do panel builders need previous experience with manufacturer’s or is it ok to hire them
  8. W

    Non combustible switchgear

    hey guys, I had a quick search but couldn’t find any posts about this. I recently done an inspection on a domestic property and found the electrical meter was outside in a service cabinet and the fuseboard was inside more than 5m away. I recommended installed a fused disconnector at the meter to...
  9. SparkyChick

    Plastic Switchgear Enclosures - Acceptable in barn?

    Hi all, I've tried to find the answer to this question, but I've drawn a blank. Situation... location is a barn, attached to a domestic property. This will be a sub-board supplied in T+E from the main board in the house. The question is... is a plastic board acceptable or should it be metal...
  10. M

    Hello

    Quick introduction. 28 yr old qualified spark with the boring PAT qualification test and inspect, design and verification, compex 08 and 09. Think That's it. moved into the switchgear side of the industry 3 years back building switchgear parking elsewhere like distribution systems changeover...
  11. Midwest

    Reg 421.1.201 Similar Switchgear Assemblies

    I have read a few posts with regard to Reg 421.1.201 & Similar Switchgear Assemblies, with regard to the definition of such. When 421.1.201 came into being, I was advised at the time about using certain enclosures. This advise, now seems to have changed. I've copied below my questions, and the...
  12. Dan

    Keeping Electrical Switchgear Safe

    Dan submitted a new resource: Keeping Electrical Switchgear Safe - Document from the Health and Safety Executive Read more about this resource...
  13. Dan

    Hsg230 – Keeping Electrical Switchgear Safe (2nd Edition)

    This guidance is aimed at owners and operators of electrical switchgear in industrial and commercial organisations. It will help managers, engineers and others to understand their responsibilities and duties in the selection, use, operation and maintenance of high-voltage switchgear. Continue...
  14. GMES

    Industrial Switchgear

    I am currently stripping out a customers new site of all the high bay lighting and 3 phase power boards and it is all up for sale if anybody is interested. There are approx 100-200 x 400w highbay fittings a couple of 800amp power boards SQ D a couple of 400amp MeM power boards 5-10 mem 3 phase...
  15. Y

    Arrow Switchgear

    Morning All, Just got this through from a colleague looking at a commercial gas boiler installHe sent this picture through, From the description of the cable coming in it sounds like MICC, but the glands don't look like MICC glands and neither does the cable, So it could just be old flex. The...
  16. T

    Power/Distribution Transformers and Large High and Low Voltage Switchgear

    Hello All, We are looking for high voltage transformers and large switch gear We can pay good prices for equipment as we refurbish the gear Have any of the above please send me a message Thanks
  17. HappyHippyDad

    Metal boards, glands, switchgear...

    Afternoon all... Just having a quick lunch break and thought I'd try and confirm some of my thoughts surrounding ammendement 3. 1. Am I right in saying that it is ok to use a normal grommet for all cables entering the metal CU as long as they are both a) entering the enclosure from the sides...
  18. Worcester

    Domestic Installs Metal CU's also = Metal PV Isolators

    Interesting webcast yesterday from NICEIC covering the 3rd Ammendment BS7671, we were aware of nearly all of it. The one thing that made us sit up though was that in accordance with the regs, they specifically mentioned that the two isolators (and any other switchgear) needed for the PV system...
  19. T

    Switchgear indication illumination colours

    Is there a standard for this? I'm trying to find information about any codes or standards regarding illuminated indicators on power switching equipment. For example: A device is designed to automatically switch a load from Supply 1 (230V, 30A, single phase) to an alternative supply. The two...
  20. Lucien Nunes

    What does this piece of switchgear do?

    This is for the young punks who think they know a bit about real switchgear, and the old geezers who might just remember seeing the results one of these things produces. I've just got this running, probably last used in the 1970s, the building it was in was knocked down in '82. If no-one...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock