Hi. The question is..... can saturated ground affect earth resistivity testing equipment?
Some days there's an unacceptable earth reading, another day it'll be perfect. The only variable seems to be the weather - ie very wet.
I've asked northern powergrid to convert to a PME system but they say...
Hi
As some of you will know . I'm studying level 2.
I have the onsite guide. But does anyone know any books I can buy to help me understand testing etc better.
Anything that will aid my learning.
Thanks for any input.
Hello fellow sparks,
I’m looking to do my testing and inspection course which starts on the 30th of April, but I have not got much testing experience. My only source of learning is hitting the books and lots of YouTube videos which I learn a lot from but of course it’s not the same as hands on...
Seeking advice, we have been replacing extractor fans for a local council and was originally told no ‘like for like’ replacement works needs a minor works certificate.
Came into the office today to find they now want minor works certificates for about 250 fans we replaced.
Now normally if...
I got a TEXT message (i dont know them and i cant find out who they are from the phone number)
"Hi speaking from Indeed
Are you available to give electrical certification for a job at Melton Mowbray?"
Guessing they have seen my CV online on Indeed and found my phone number and wated me to Sign...
Hi All
DALI lighting system distributes circuit via LCM's, for electrical test, do you stop at the LCM or light point.
how do you carry out insulation test without damaging DALI equipment
Evening. Got my hands on a pair of choke ballasts to run fluorescent tubes a few days ago and I want to see if they're in good condition.
If we're talking age these things are relics, manufactured in the USSR in 1964 and 1971 respectively, the guy who gave them to me said they were working...
Hi,
I carry out PAT testing on landlord appliances for letting agents in rented accommodation.
Occasionally some of the items I cannot access the plugtop without issues e.g appliances on Lino floor where it is impossible to remove without damaging the floor, cooker hoods with units built...
In my line of work it's very rare that I ever have to change a DB. I'm largely in maintenance; occasionally have to add new circuits etc. so in respect to Testing this is all fairly straightforward to me.
I was thinking about DB changes earlier and started to stumble when it came to IR Testing...
Hello,
I have an all-in-one washer/dryer unit and it is giving me error codes. I have the manual that describes how to test the various components on the control module, but the introduction to the Component Testing Procedures section has me a little confused. It seems to contradict itself by...
Hi all, I am currently doing my 2391-52 testing course, can anyone recommend where I can find revision past paper or online revision sites for the online multiple choice exam
Hello everyone,
Is it necessary to test RCBO x5? Some say that you can’t even test at x5 times because it can damage RCBO. Others that you can, but we don’t put the result in testing sheets. I found a recommendation that it is advisable to test x5.
Cheers
Friend of mines dryer machine has stopped working, 2 days out of warranty.
I am trying to help theme out as money is tight for them however, I'm a little unsure my diagnosis is correct and I don't want them spending unnecessarily on replacement parts.
The dryer is a Candy machine and has a...
Hi,
I perform annual PAT checks for my company (office and workshop). The Apollo 400 machine we use has recently gone for calibration and service and since it's come back, items which passed easily last year (Earth Continuity below 0.1ohm), are now not passing. I've now raised the earth...
Hi
I'm just starting to fit EV chargers as part of our solar installs. Just looking at the tester options I currently have a Megger 1711 but this isn't suitable due to no DC RCD test.
Does everyone end up buying a new MFT or am I missing something?
cheers
Hi all, Im new to the forum and wanted to check something and maybe get some advice confirmation.
Ive got halogen wall lights which use a Huibolong HTV60C1 transformer, one failed about 4 years ago and i got a replacement from savemylight.co.uk. I fitted it and it was all good. Another one of...
Hi guys.
I posted yesterday about a suspected faulty starter motor..
I've had the starter out and cleaned everything up and all seems to be working well.
Bench tests well everytime.
And at a price of $2200 for a new starter motor I'm going to look elsewhere for the problem.
My suspicion now lies...
Opinions on this Crabtree TP 10 way board? Got to test this next week after a quick recce on a clients site yesterday. Although probably electrically safe the RCCB is feeding everything including another board Fed via an SWA and some external services also in armoured to. Thing that bothers me...
How many of you that install EV have a tester that can test integral RDC-DD devices ?
I’m starting to get a more enquiries but don’t know the consensus on this
Commissioning a busduct. My contractor has installed a 2000amp aluminum Busduct in a 17 floor office tower.
The specifications state you should undertake field quality tests on site, which are more stringent than the manufacturers' static tests, for the following:
1, Perform resistance...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.