working

  1. S

    Bathroom light isnt working

    Hi guys, soooo I recently took down a stud wall between my toilet and bathroom and removed this light switch and light but now the bigger bathroom light & fan won't work, there was also a cable going from the bathroom light to the hall way light fitting that I removed also ??‍♂️? any ideas ?
  2. GBDamo

    How were these still working?

    Removed and replaced 6 8ft fluorescent fittings today and all were similar to the bellow yet all were still working, how?
  3. J

    Toilet light not working

    To all electricians: my toilet light stopped working and the bulbs and entire fixture has been changed. Could the extraction fan have blown and would that affect the light?
  4. R

    Risk Assessment for Working at Height

    Ive got to complete a Word Document regarding a Risk Assessment for Working at Height. Would anyone be able to give me pointers. It only has to be brief then all of the tables will be filled in. Ive not done one before, so I am in need of some advice if possible?
  5. Q

    Negative ions emitter device not working when switched on.

    I have an electrically operated device whose purpose is to emit trillions of negative ions. When it is on it shows an orange light and you can feel a slight breeze coming from the negative ion emitters. However, it is not working now. The orange light will not come on when it is switched on...
  6. T

    Can't get overload circuit in house working again

    A circuit in my house quit working when a toaster oven and portable electric heater where both running on it. Normally the simple fix would be resetting the tripped breaker. However, the breaker did not appear to be tripped. I turned it off and on just to make sure and still no luck. Next...
  7. K

    HVAC, fan not ON working in AUTO mode

    I replaced an old (mercury type) thermostat with a new Honeywell thermostat model RTH2300B. The wiring is quite straight forward based on the manual: red to R, white to W, yellow to Y and green to G. There is no C so the 24VAC common is not connected. I have to install 2 AAA batteries per...
  8. M

    Why my light and outlet stopped working?

    In my bathroom there is a celling light, a light over the mirror and an outlet. I went to replace the light over the mirror. When I successfully did that the celling light and outlet stopped working. There was two black and two white wires attached in the box that I wrongly disconnected...
  9. A

    Light on separate circuit stopped working

    Hi everyone. I’m a newly qualified electrician. Just had a confusing issue. I put up a new light in a clock room for a customer. It’s a microwave sensor light. So I left out the switch live and terminated feed in feed out lives and neutrals. Now, an upstairs light stopped working. I can’t...
  10. Jetheat

    2-Way 2-Gang - One of them not working

    I'm not an electrician and I'd like some advice. I'm trying to troubleshoot a wiring problem. I have a 2-way (2 gang) outlet on the wall with 4 sets of wires. This outlet is working well and a couple of the brown wires show voltage (live wires). I've shown these with arrows on the attached...
  11. Lucien Nunes

    Light not working, needs repair.

    I have an old light in the workshop that has not been used for a long time and needs some TLC. First to put a name to it (not you, Marconi) wins a weekend for two in sunny Hertfordhire loading vans at the warehouse. You can ask questions about the pics. First problem, this was jammed with...
  12. D

    Should we really be working in peoples homes in Tier 3

    Londin and now surrey have a very high covid rate and been placed in Tier 3 restrictions which got mr thinking, we aren’t supposed to go in peoples houses socially, so should we really be working in peoples houses ? Other than for emergency call-outs etc thoughts ??
  13. R

    Off peak/ peak issues - appliances not working on "off peak"

    Hello, Needing some advice if possible. I'm not a qualified sparky but DIY'er (A 'Sarah Beeny' lol) so apologies if this isn't the correct forum. In a nutshell, I've been renovating a let property. Same tenants for 10yrs. New heaters (all electric flat) were installed by 'agents' tradesmen...
  14. S

    Horstmann Economy 7 - Boost Working but when on timer no water heating overnight

    Hi there, In my apartment I have a Horstmann Economy 7 2 hour water heater system, in recent weeks it has stopped working overnight, when I wake up in the morning there is no hot water. I've checked / reset the clock to make sure its set correctly & it does seem to be turning / moving ahead as...
  15. OnlQQker

    Puts A Whole New Meaning To Working Live...

    Has anyone ever done any lineman work? Sudden weather change must be a nightmare!
  16. O

    Spotlights not working once they touch earth

    My problem is, I did the wiring for my outdoor spotlights, it’s to light up some trees, before taking it out , I tested it in the garage and everything is working, once one of the spotlight is coming close to the earth it cuts to power of in the house. Hopefully someone can help me with this...
  17. A

    Shower pull cord switch melted new one not working.

    Hi had a 45amp shower pull cord switch melt on me so replaced it with a 50amp one did it all correctly but no joy and the switch doesn't come on or light up. Is it possible the shower itself has gone aswell. Please help!
  18. O

    Problem with trailer lights not working

    Hi, we have a trailer at work a large car transport trailer. All the lights suddenly stop working, tested electrics on the van with a lighting board, all working perfectly. When I connect a wire to the white wires in the plug, and the other end to the bare metal on the tow bar on the van, they...
  19. D

    Bedroom lights not working

    I am replacing some bedroom lights for my girlfriends parents, their old ones stopped working, they where built in LED bulbs with a live and neutral coming from the fixtures, so I am replacing them with newer lighting fixtures, it is straight forward, put the cables into the relitive parts but...
  20. M

    Black and Decker Lithium Battery Charger Cable Torn and Repaired and but not working!

    Hi guys the thin wiring cable on my Black and Decker lithium battery charger for my power drill and saw was accidentally cut and I tried to rewire it back together (see photos). When I plug it into the wall outlet, the red light doesn't turn on which means it's not charging. What am I doing...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock