Pete's Videos A clipping masterclass

Discuss A clipping masterclass in the UK Electrical Forum area at ElectriciansForums.net

a bloody hammer's length between clips? everbody knows it should be 3/4 hammer, according to the cable diameter, excepting of course for vertical drips when a hammer and 1/4 will suffice.
 
Be a damn site less hard to bang in if you use the whole hammer handle length.
My dad used to shout at me "they made the handle that long for a reason son"
 
BT used to use a hammer length spacing but it was a cross pein hammer they used & the shat was shorter. Don't know why he has so much problem with blowing out the brick face, especially as he seems to be talking about drilling in not out.
 
BT used to use a hammer length spacing but it was a cross pein hammer they used & the shat was shorter. Don't know why he has so much problem with blowing out the brick face, especially as he seems to be talking about drilling in not out.
where can a tool tart like me buy a hammer with a short shat? i want one.
 
I may have just become a bit accustomed to only horrendous videos detailing silly work practices being posted here. However, are there any glaring bits wrong with this video, or is this actually a good "how-to" video?

If this is so, perhaps a new subform could be established that is actually filled with helpful and good "how-to" videos!

Please rate this dumb or as appropriate haha!
 

Reply to A clipping masterclass in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

This might come across as a really daft question to people who work with cable tray quite often but as part of my AM2, I am to clip FP200 to the...
Replies
31
Views
2K
Hi There Just a quick one, I'm wondering what's everyone's thoughts on this are. A subby has clipped a cable to a plaster board ceiling using 3m...
Replies
8
Views
690
Apparently Dimplex only guarantee their heaters if they are permanently wired in to a fused outlet. If the socket is only about 600mm from the...
Replies
5
Views
391
Hi! I've got a couple of 32A Wago clips. Creating a spur socket from a ring circuit with these is quite easy, but I wanted to know if it's...
Replies
10
Views
1K
If cable is run through holes in joists, then turns through 90 degrees, clipped to the joist, then clipped to the brick wall as itvdrops to the...
Replies
0
Views
206

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock