I had the meter changed so I no longer have economy seven. Both consumer units are live 24/7. I have now put two of the radial socket circuits onto the ring as it was easy to do and gives them RCD protection. The heater circuit has no RCD protection. I will keep the second CCU for the two remaining heaters and reconnect the spare immersion and add an RCD when I upgrade the main consumer unit.
Discuss Adding single radial sockets to Ring as spurs in the UK Electrical Forum area at ElectriciansForums.net
Reply to Adding single radial sockets to Ring as spurs in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Hi guys, newbie posting!
Does the following sound ok...
Existing circuit:
SOCKET on a ring -> spur to SWITCHED 3A FCU -> SWITCH -> hardwired FAN...
In a property with two consumer units one for the ring main etc., and the other for the 1970s storage heaters (storage heater CU looks like it’s...
Hi all I would like to put some sockets in the attic and keep them on the main house ring main. Am I right in saying I can pull one of the legs...
We have a room in the house that was the kitchen. That has been relocated to a different area, so the old kitchen has been sold off and the room...
Essentially I have a "normal" socket in a ring mains, i.e. one 2.5mm T&E going in and one 2.5mm T&E going out.
I am looking to simply add two more...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.