Hi Guys,
after some advice please. Am refitting a kitchen. New appliances are 6.6kw induction hob. 3.48kw single over (instructions say requires 15amp fuse and 20amp rcd) and 3kw microwave multifunction oven ( instructions say requires 15amp fuse and 20 amp rcd). The existing wiring is 6mm to a 16amp rcd in the consumer unit.
Is there any way to connect all three new appliances to the existing cable or do I need to run a new cable from the consumer unit?
Thanks
after some advice please. Am refitting a kitchen. New appliances are 6.6kw induction hob. 3.48kw single over (instructions say requires 15amp fuse and 20amp rcd) and 3kw microwave multifunction oven ( instructions say requires 15amp fuse and 20 amp rcd). The existing wiring is 6mm to a 16amp rcd in the consumer unit.
Is there any way to connect all three new appliances to the existing cable or do I need to run a new cable from the consumer unit?
Thanks