S
SensesFailYou
Well I went to price a job yesterday changing a consumer unit and installing the main protective bonding conductors. So everything is A ok but when it comes to the kitchen it's very small, has a built in fan assisted cooker, pull out cupboards and nicely tiled so that sets the scene. The cooker switch is behind the plinth on the floor which then feeds the hob, fan assisted oven direct from the isolator and the on board socket is powering the fridge. Now there's no real place to put this and removing tiles to place it above bench would probably not be an option but I'm not happy with it on the floor behind the plinth which easily comes off. Would this be an observation on the test sheet for the DB change if the customer didn't want to move it? The only option I can see is to move it and place it in the cupboard above the fan assisted cooker but it would have to go at the back as its a high up cupboard etc and by the time they fill the cupboards it would be a bugger to get to n the event of isolation. (I put all this kind of stuff to the fronts of the cupboards for easy access)
also I believe the socket for the washer is behind the washer!
any thoughts would be appreciated cheers guys
also I believe the socket for the washer is behind the washer!
any thoughts would be appreciated cheers guys