Discuss Help! Advice please. in the UK Electrical Forum area at ElectriciansForums.net

Notwithstanding all the valid arguments regarding being contacted first about remedial actions etc etc, surely if you replaced a CCU and have therefore tested all the circuits therein, would you not then be liable for the integrity of those circuits? Unless of course you made specific reference to any problems you encountered - in which case you'd have left the circuit(s) powered off?
 
OP you have had great advice so far. You state faults were identified by another after you had left. I think I would email the builder back and state your surprise that there was any issue's with any of the work you done. You could also state that you tested all of the work you were responsible for and also that having found potential issues you recommended a full inspection which he/they declined. When you left site all circuits worked on and energized by yourself were fully compliant with BS7671 standards and due to your refusal to authorize further work and investigation you can not comment or be held responsible for issues that you had already identified.

Word it cleverly enough and chuck the smelly ball back in their court. I personally would be very clear that you had identified the issues and requested further instruction which was not given. OR just deny the whole thing and write back asking who he is and why he is writing to you...lol
 
I think a polite email is in order, along the lines of:

Thank you for your email of the ......

I'm more than a little surprised to receive this information, so long after the time I was on site. In addition as you chose not to ask me to come to site to discuss any issues you may believe were present I do not feel I can contribute to the situation as you have had another contractor to undertake work."
 
I think what strikes me thinking about it, you say you had pointed out there were problems no one asked you to remedy. Then another spark comes along says the same and someone forks out nigh £2.5k for works. Why did they not fork out of for you???
 

Reply to Help! Advice please. in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all, New to the forum. I have been asked to look at this for one of our guys who's had an issue onsite after some electrical works had been...
Replies
4
Views
672
Hi Everyone, This is my last question/post for tonight, promise. Please can I ask for a little advice on certificates as I am now questioning...
Replies
4
Views
903
Hi guys, could someone help with the following please? The scenario is: Domestic property supplied via three phase (with a 3P main DB, NO SPD)...
Replies
2
Views
463
Hi, need some advice, I moved over from Sse in 2020 to Octpus energy. Whilst I was with SSE I was on E10 when I went over to octopus they put me...
Replies
1
Views
374
Need help with a quote here. I’m wanting some sound advice. Was called out to the hot water not working so repaired the issue within the panel...
Replies
10
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock