Discuss How not to change an MCB in a board! in the UK Electrical Forum area at ElectriciansForums.net
Share this page
OP
- Reaction score
- 575
Go on Pete.. just say what you're thinking!!
- Reaction score
- 1,650
I was waiting for the bang.
S
Specialist
Why is it that, that video doesn't surprise me any more 
- Reaction score
- 184
American so its only 110v just a tingle at most LOL
- Reaction score
- 1
Hope he was standing on a mat bzzzzzz!!
Reply to How not to change an MCB in a board! in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
So here is the thing
Rhere is an old MEMSHIELD TPN+E Board that is pretty mich obsolete. The only place that sells their breakers would be Ebay...
I'm not sure what's going on with my kitchen light.
I've replaced an old 28W CFL fitting with a new 4 x LED GU10 fitting (a cheap one from...
I have a fuseboard change I need to do soon
I’m putting in a FUSEBOX 7 or 10 way RCBO+ SPD
My only concern is how I should run the pyro cables in...
Has anyone fitted an SPD to a schneider standalone AFDD DB.
Isobar P B Standalone Active distribution board, Acti9, 24 AFDD ways
This board only...
I have a 40amp RCD downstream of a 50a MCB (10mm csa cable) should the MCB be lowered to protect the RCD from overload?
If so why does this not...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.