B
Bobster
http://www.test-mete...dcXmBoChmzw_wcB
Same as the above, it's a year old but has only been used 3-4 times tops.
I don't think it's in calibration still, but I can arrange to have it calibrated for anyone interested.
Key specs below:
Will post some photos when I get home later.
I think a reasonable price would be £300 ONO, with recorded delivery included.
Megger LTW425 Loop Impedance Tester Key Features:
Same as the above, it's a year old but has only been used 3-4 times tops.
I don't think it's in calibration still, but I can arrange to have it calibrated for anyone interested.
Key specs below:
Will post some photos when I get home later.
I think a reasonable price would be £300 ONO, with recorded delivery included.
Megger LTW425 Loop Impedance Tester Key Features:
- Two wire loop impedance measurement.
- Phase to Earth testing.
- Phase to Neutral testing.
- Guaranteed not to trip working RCDs of up to 30mA.
- Three phase circuits with RCD protection can also be tested.
- Test runs for approx. 10 secs.
- Sophisticated noise detection circuitry that monitors supply to ensure accuracy.
- Additional 10 secs is required if electrical noise is detected that could affect results.
- High current test used for supplies with no RCD.
- Auto-start function will start loop test running as soon as leads are connected.
- Enables testing on 110V centre tapped supplies.
- Frequency measurement.
- Backlit display.
- Three-phase safe and Category IV 300V rated.
- PFC calculation up to 40KA.
- Test results are displayed to a resolution of 0.001Ω.
- Phase to Phase testing.
- Voltage range: 50V to 440V AC.
- Max Z measurement.
- R1 + R2 measurement.