Pete's Videos Never heard of a bending spring then
Discuss Never heard of a bending spring then in the UK Electrical Forum area at ElectriciansForums.net
Share this page
OP
- Reaction score
- 17,092
I worked with a bloke on one trip, he did his time as a maintenance spark, we had loads of PVC tube to install, and he wanted to use a heat gun to bend it, quite put out when I started bending it with a spring.
OP
- Reaction score
- 17,092
True
Reply to Never heard of a bending spring then in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
I’m an electrician trainee and very new to conduit bending.
So the length of the floating wood is 9 1/2” and the height is 10 3/4”
I’m doing a...
any body heard from the top commander, Tele not been here for a while .
has he smoked his last woodbine and his ashes put in the packet .lol.
I’m looking to buy a Conduit Bender. Does this come with everything...
Would anyone be able to recommend a good 25mm bending spring. I assume there is a difference between say a Marshall Tufflex and a Tower one from...
Bit like those things you see clamped onto a water mains when people add an outside tap.
Just a lot more dangerous by the looks of it on the...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.