Discuss risk assessment in the Australia area at ElectriciansForums.net

have you tried googling risk assessment?
 
I have lots of risk assessment forms for a construction company but they are all very specific to individual activities. The only general bit is that they have 3 columns:
1- Risk associated with activity
2- Precautions taken to reduce risk
3 - PPE requirements and comments

I have also undertaken risk assessment workshops for projects and it then starts to get more complicated with assessment of likelihood of occurrence (High, Medium, Low) and Impact if it does happen (High Medium Low). Ignore Low/Lows and concentrate on High/Highs and High/Mediums and possibly Medium/Mediums to reduce the impact and or reduce the likelihood of occurrence. Then monitor any which cannot be reduced below Medium/Medium. It is easy to show with a diagram but difficult to describe.

I also have an .xlsx spreadsheet with generic risks if you are interested.

People do degrees in Risk Management so there must be more to it than above?
 
People do degrees in Risk Management so there must be more to it than above?

You'd think.

Risk assessment is still essentially subjective - that is, based on the views, assumptions, and evidence, of the assessor. Unfortunately, "competence" is also measured subjectively.

Most RA is based, however, on probability (or likelihood) versus severity of risk - and seeks only to prove awareness that risks were considered before you electrocuted yourself :)

Risk Management is a little more involved, though, for sure.
 

Reply to risk assessment in the Australia area at ElectriciansForums.net

Similar Threads

Hello to everyone If anyone have a up to date risk assessment template for domestic installation, have an assessment in two days . Thank you.
Replies
3
Views
2K
Hello fellow sparks I have a question regarding NAPIT assessment I'm due to have soon. I'm getting Electrical Inspector Scheme and Third Party...
Replies
21
Views
3K
AM2 Risk Assessment how to get pass in this section? Earnest need! I am going to have the assessment next week. Please advice.
Replies
0
Views
1K
i have faild napit annual assessment with silly mistake of using on consumer unit type AC rcd instead of Type A rcd. i bought type A rcd but they...
Replies
6
Views
696
Hi All I'm just about to start on my own and been wondering, how do you guys arrange your assessment visit to the customers properties? Are the...
Replies
10
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock