twinflex fire alarm fault.

[Michael0703]

Hi,
needing some advice with a 2 zone twin flex fire alarm panel.
The panel is showing a power fault which is obviously the batteries as the voltage is only 19volts, but the panel has also shows a fault. See attachment.

 

[Sintra]

Looks like it's indicating zone 1 in test mode.

 

[Phil L]

As above clearly zone 1 is in test

 

[Michael0703]

Why is the fault led on if it is in test mode?

 

[Sintra]

You have a power fault also. The fault light is general for all faults.

 

[Michael0703]

Yeah the panel needs new batteries. Thanks for the replies hopefully that will cure it.

 

[Sintra]

You will still need to take zone 1 out of test mode

 

[tazz]

Why is the fault led on if it is in test mode?

because there is also a power fault, concerning the batteries