Where can I buy a pyro earth clamp

[haptism]

Hi looking at an earlier thread here

earthing micc cable - http://www.electriciansforums.co.uk/threads/earthing-micc-cable.90299/

Anyone know where i can buy such a pyro earth clamp?

Theres not much room to change the pot, and a standard earth clamp would be too large.

Thanks

 

[bill01803]

What about a piranha nut

 

[Specialist]

Try CEF or Newey's they probably still stock them.

 

[haptism]

What about a piranha nut

I would prefer to use the earth clamp mentioned if theyre readily available, although I cant find them listed anywhere, but that is an option with a pirhana nut.

 

[haptism]

Try CEF or Newey's they probably still stock them.

Just called CEF but they have not heard of them. Anyone know what these are called exactly/part no ect

 

[Marvo]

What size pyro cable is it? Can't you use a constant tension clamp? CONSTANT FORCE SPRINGS, 3M FORCE SPRINGS, P60, P61, P62, P63, P64, P65 SPRINGS - http://www.cablejoints.co.uk/sub-product-details/cable-socks/constant-force-springs

 

[haptism]

What size pyro cable is it? Can't you use a constant tension clamp? CONSTANT FORCE SPRINGS, 3M FORCE SPRINGS, P60, P61, P62, P63, P64, P65 SPRINGS - http://www.cablejoints.co.uk/sub-product-details/cable-socks/constant-force-springs

Thanks for the link but theyre a bit large and no room to adjust. Think i have to chop wall out and refit a earth tail pot.

 

[Bobster]

LMGTFY - http://bfy.tw/BaUD

 

[davesparks]

I've tried to find these things before but never had any luck yet.
My solution if fitting a piranha nut or changing the pot is not practical is to fit a bare P clip and solder it to the sheath.

 

[haptism]

Thanks for responses, ended up getting one of these

MK K2131WHI 1 Gang 37mm Pyro Surface Mounting Box - Edwardes - https://www.edwardes.co.uk/en/products/mk-k2131whi-1-gang-37mm-surface-mounting-box-for-20mm-pyro-pots

which after a bit of tinkering bolted to the back box and job done !

 

[davesparks]

LMGTFY - http://bfy.tw/BaUD

They're often not easy to retrofit into a pyro install. And they take up a fair amount of room in a standard back box so can be a pain.

 

[Bobster]

They're often not easy to retrofit into a pyro install. And they take up a fair amount of room in a standard back box so can be a pain.

Never tried retrofitting anything to Pyro. All of the installs I've done I've either used a banjo or a pot with a soldered earth right off the bat.

 

[davesparks]

All of the installs I've done I've either used a banjo or a pot with a soldered earth right off the bat.

Same here, but I've done a fair amount of fixing other people's bad installs too