Teeside HNC Electrical and Electronic Engineering

AyresomeBoro · Nov 6, 2017

Recently enrolled on HNC Distance Learning.

I submitted first two assignments of Analytical Methods to distinction grade and I'll probably submit assignment three by the end of this week. The maths is very similar to AS Level.

What would be the next module for me to purchase?

AyresomeBoro · Nov 6, 2017

paulnev76 said:
Hi Ive nearly finished Analytical Methods will I have to do a Skype interview as well

How does the Skype interview go? What type of questions do they ask?

Tom morgan · Nov 21, 2017

Hi i just started the distance learning hnc course and curious how the skype interviews work too. Oh and if anyone needs any help with mechanical questions give me a shout as that is my background

AyresomeBoro · Nov 21, 2017

Just bought Engineering Science as a second module. £495 stings a bit!

The questions look a bit shorter than Analytical Methods at first glance.

Connor Mennell · Nov 24, 2017

Hi guys, I've just started this course in mid september. Finished my first module AME. Found it just like being back in AS/A level maths so had no real issues and got a distinction overall so any questions just give me a shout, i'll be pretty proactive on here over the course of it! Just started engineering science and I can tell the first 2 modules are going to be grim but doesn't look any harder than AME! How are you finding Engineering Science so far @AyresomeBoro? I've just started reading the notes today. @Tom morgan I didn't have one for AME but usually it sounds like they just get you to walk through your answers and any incorrect ones see if you knew where you went wrong. Quite informal i think.

AyresomeBoro · Nov 29, 2017

Connor Mennell said:
Hi guys, I've just started this course in mid september. Finished my first module AME. Found it just like being back in AS/A level maths so had no real issues and got a distinction overall so any questions just give me a shout, i'll be pretty proactive on here over the course of it! Just started engineering science and I can tell the first 2 modules are going to be grim but doesn't look any harder than AME! How are you finding Engineering Science so far @AyresomeBoro? I've just started reading the notes today. @Tom morgan I didn't have one for AME but usually it sounds like they just get you to walk through your answers and any incorrect ones see if you knew where you went wrong. Quite informal i think.

I haven't looked at it yet, have you started any assignments for it?

Connor Mennell · Nov 29, 2017

AyresomeBoro said:
I haven't looked at it yet, have you started any assignments for it?

Not yet, currently gone through lessons 1, 2 and half of 3. Some of it's very easy to understand, other bits are bit like, i don't know what I've just learnt. Looks a bit of a grim start though, others have said ENS is a bit of a struggle till nearer the end, being electrically biased looking at mechanical concepts.

Connor Mennell · Dec 13, 2017

Hi all,
Just started TMA 01 for Engineering Science and my gosh does it make AME look simple. Anyone who has done it who can offer some advice or is doing it now and wishes to discuss how they've gone about it please feel free!

Tom morgan · Dec 13, 2017

@Connor Mennell iv hit a bit of a brick wall on tma 2 q3.. dont know if im staring at it too much and not able to see wood from trees any help on that would be appreciated

Connor Mennell · Dec 13, 2017

Tom morgan said:
@Connor Mennell iv hit a bit of a brick wall on tma 2 q3.. dont know if im staring at it too much and not able to see wood from trees any help on that would be appreciated

For what module Tom? message me on the conversation i've started with my trouble on Eng Sci haha.

Connor Mennell · Dec 19, 2017

@AyresomeBoro done any of Engineering Science yet? i've done questions 1/2 (i think) of TMA 1 question 3 has me baffled. I've found part a) but unsure about b) and c)

Tom morgan · Feb 28, 2018

Has anybody on here not used much of the lessons they send out? I find their material a bit confusing at best so am using other textbooks etc.. just wondered if anyone else found this to be the case

The apprentice · Feb 28, 2018

i done my intro to electrical and electronic engineering then i went on to do my NC then got mid way through my HNC but got an apprenticeship being a sparky still have all my course work if u could explain what it is you are stuck on thanks

Tom morgan · Feb 28, 2018

Maybe that came out wrong.. i'm not stuck on anything i just find the notes are very confusing and i find it easier using text books like the john bird ones etc.. just wondered if anyone else did it this way.. ame especially as thats what i'm on

The apprentice · Feb 28, 2018

i just used to revise and revise the TMA and look in books aswell i done it that way would recommend doing it the way your doing it worked for me hope all goes well mate good luck

AyresomeBoro · Mar 6, 2018

Lost focus with HNC over Christmas and then I had the flu. I've picked the work back up over the last 2/3 weeks.

Assignment 1 (Static Engineering Systems) of Engineering Science is a ball ache! I've had a rough attempt at the answers sat waiting to be submitted for a while but I'm not confident they're correct, especially the graphs.

Assignment 2 looks more of the same so also swerving that for now.

I Completed assignment 3 (D.C Circuits) to Distinction.

Assignment 4 (A.C Circuits) is almost complete too.

Connor Mennell · Mar 8, 2018

How's it going lads? I just finished ENS with a Distinction, i found TMA 1 disgusting, the rest is pretty easy though. On EEP now... jesus my head hurts! nearly about to start TMA 1 for EEP, is it as bad as it looks?

AyresomeBoro · Mar 30, 2018

Can anyone help with 'Sketch the Waveforms of Harmonic Components' graph on ENS-4?

All the graphs so far I have done by hand on graph paper. Should I be using a software programme to do this?

Connor Mennell · Apr 2, 2018

AyresomeBoro said:
Can anyone help with 'Sketch the Waveforms of Harmonic Components' graph on ENS-4?

All the graphs so far I have done by hand on graph paper. Should I be using a software programme to do this?

I just watched YouTube video on how to make a sine wave graph on excel and then used excel to make the harmonic graphs.

AyresomeBoro · Apr 21, 2018

Connor Mennell said:
I just watched YouTube video on how to make a sine wave graph on excel and then used excel to make the harmonic graphs.

I've started using Excel for all graphs now, cheers for the advise.

Finally completed Engineering Science! Going to start Circuit Theory on Monday.

Share this page

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Share this page

Similar Threads

OFFICIAL SPONSORS

Tags