accenta

  1. N

    Accenta alarm pir cable colours

    My pir cables are red+ Black - Yellow blue alarm or relay Yellow green tamper However one has different colours Blue Blue white Orange Orange white Brown Brown white Can anyone tell me what these should be
  2. S

    Honeywell Alarm Accenta G4 alternative

    Hi, Im an electrician but have been installing the odd alarms for some of my customers too. Used to use the Honeywell Accenta G4 with the dialler facility etc with no problems. However it seems Honeywell have discontinued this easy to install system. Could anyone recommended a replacement...
  3. F

    accenta mini alarm setup

    hi guys, looking for a bit of help on the above alarm, how do you setup the alarm so that you can turn off pir zones at night time. thanks in advance
  4. C

    Unusual Accenta G4 Honeywell Fault- Keypad

    Hi All, We have had an Acenta G4 alarm fitted for 5 years. It has been fine until recently, however the keypad now appears to have failed. There are PIRS sensors, a door sensor and an alarm box with LEDs/siren. On the keypad, the 2 LED lights are not illuminated. The keypad does not work...
  5. telectrix

    Accenta Ideal

    anyone know if i can get a replacement (panel or PCB). the Ideal used ID biscuits in detectors so it needs to be either an Ideal or compatible.
  6. Dave Appleby

    Accenta help

    Good afternoon all. I have the dubious honour of trying to resurrect an Accenta 8 mini G3. All looks good except..... The client pulled ALL the fuses including the PCB glass. So I have 4 fuses and no idea where they actually should go as they are a mixture of QB and TD. All different...
  7. M

    Honeywell Accenta G4 setting error

    I have just installed a Honeywell Accenta G4 system. All ok apart from 2 queries: The entry/exit zone 1 is a PIR (there are no door contacts on my system, just 2 PIR's) It is set to zone 1. The second PIR is in the lounge. The system will set ok, but only after I am out of the range of the zone...
  8. A

    Accenta 6 decommissioning

    Hello I have bought a house with one of these fitted. I had to turn the electric off to do some work and when I turned it back on the alarm panel was beeping. I was able to stop it by putting in the code though assume if I hadn't the alarm would have sounded. I Googled this and it looks like it...
  9. R

    Honeywell accenta gen4 alarm.

    My Alarm has went off randomly last couple of nights, when I enter into engineer mode to look through the menu options there is certain options that are missing. When I’m in engineer mode I get 0 = walk test 1= alarm test Then it’s goes to number 4= date and time And there is other ones...
  10. B

    Honeywell Accenta G4 Mini with LED Keypad

    Hi, could do with some help please. I installed a Accenta G4 Mini alarm system with x3 LED keypads about 4 years ago which has been working fine. About 2 months ago the garage keypad speaker stopped working however the keypad still worked fine for setting/unsettling. About 1 week ago another...
  11. Ben Keer

    Honeywell accenta g4

    I have an accenta G4 system which haven't used for a couple of years and the bell box only sounds for a few seconds once activated then turns off. It works on bell test and the internal keypad sounder works ok but I can't find anything in the setup which would suggest anything wrong. Bell delay...
  12. J

    Programming key switch on an accenta G4

    Hi can anyone one run through how I program a zone as a keyswitch on the accenta G4 alarm it has the remote key pad. I've installed a Konnected wireless interface which has a relay for setting the alarm from a mobile but I can't find the instructions for setting the zone as a keyswitch in the...
  13. 877

    Accenta alarms (explain keyswitch and set to an idiot)...

    So I have two alarm panels (garage and home): Accenta 6 - has keyswitch and set terminals Accenta Optima G3 - zones can be configured to keyswitch or 'push to set', Could someone explain them in plain english and how they would be used practially? Many thanks Info attached: Accenta 6 info...
  14. B

    Accenta 6 replacement RKP problem

    Just replaced one of 2 RKPs within Accenta 6 system with ADE Gen4 keypad without trouble. Both lights are on, all buttons produce a beep and the existing code both sets and unsets the system. Twin button SOS feature also works. However cannot get into the program functions using either the...
  15. N

    Honeywell Accenta G4 - Silent Alarm Set

    Hi All Just installed a Honeywell Accenta G4 and everything works perfectly. I have a remote keypad upstairs on the landing. I have Program 2 set to activate all downstairs zones, which we use at night. Program 2 is set to arm itself silently. I type in our alarm code and press P to silence...
  16. T

    Honeywell Accenta zone problem!!

    Just installed a Honeywell Accenta alarm and having some trouble with a zone. Basically, when the alarm is set and the front door contact is broke, the alarm gives me time to put the code in to deactivate. Unfortunately the PIR in the hallway is activated and triggers the alarm to go off fully...
  17. T

    Honeywell G4 Accenta Remote Keypad

    Hi all, just powered up a G4 Accenta and I'm having trouble with the remote keypad. The red and green indicator led's are lighting up,but thats it. Nothing on the lcd display,no backlighting and no response to putting default code (0123) in. This is a brand new system,straight out the box. I've...
  18. T

    Honeywell Accenta G4 Remote Keypad problem

    Hi all, just powered up a G4 Accenta and I'm having trouble with the remote keypad. The red and green indicator led's are lighting up,but thats it. Nothing on the lcd display,no backlighting and no response to putting default code (0123) in. This is a brand new system,straight out the box. I've...
  19. B

    Accenta Gen4 - Magnetic Contacts Repeat Failure.

    Something I have found nobody has experienced before, just me unfortunately, but I thought I'd try you guys for one last fault finding. Thank you in advance. Over some years I have had to keep replacing the magnetic contacts on my outbuilding where I have the Accenta Gen4 system setup. Issue...
  20. S

    Accenta Optima Compact PA Disconnecting

    I have just bought a house that has a Accenta Optima Compact installed. It is a previously rented house and has a Personal Attack Alarm in both bedrooms. If I put the panel into engineers mode and disconnect the PA terminals will this disconnect the Pas or will I need to put a jumper over the Pa...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock