adapter

Recent contents Top users
  1. B

    I need a 25mm plain to 20mm screwed conduit adapter.

    Have an isolator switch with 20mm screwed entries into the bottom. Have existing 25mm conduit I want to run into it. Ideally I need a simple adapter, 25mm plain to 20mm screwed conduit adapter. Does this exist cause I can't google one anywhere.
  2. robertl

    Boiling water tap and waste disposal into socket adapter

    Hi All, Looking for a bit of advice. Just bought a boiling water tap, with a max kw rating of 1.5. We already have a waste disposal under the sink which we use after most meals which is around 13 years old, but have found a link for it which i have posted below. 0.55kw it says it is...
  3. K

    Hilti battery charger or adapter

    Hi, I have been looking for a hilti Ca 7/36 battery adapter or a TCU 22H 120v charger or a TCU 12/24M 120v charger. Without one of the above I am unable to charge the batteries for my drill. Can anyone point me in the right direction, where I could purchase any one of the above? Preferably I...
  4. F

    1/2” Course to Fine Thread Adapter???

    Hi I’m at my wits end trying to find a lamp adapter for my friends French (I think) lamp. It has a larger thread on the lamp to the thread on a normal bulb holder. I ordered a French thread adapter which would have been perfect if it was 10mm but it’s not it’s 1/2 inch. Any ideas on where I can...
  5. thisguydiditagain

    3-pin to 3-pin adapter safe?

    Hi all, Hoping someone can shed some light on this, i have purchased a surge protector and it will not fit the power cables i plan on using. I have purchased a Vietnam surger protector seen here and i have bought a new pc monitor which appears to have an Australian style plug. I'm hoping i can...
  6. YossiD

    Looking for G9 to G4 adapter

    I have some lighting fixtures with G9 sockets that I want to use for outdoor 12V LED lighting. After extensive searches I have come to the conclusion that there are no 12V G9 LED bulbs, only G4. Nor have I managed to find any G9 to G4 adapters. Does such a thing exist? Due to the structure of...
  7. W

    Conduit adapter sealing

    How are you supposed to watertight seal pvc conduit adapters (plain to screw) when penetrating a weatherproof junction box?
    • Wolf38
    • Thread
    • adapter ausie elec conduit
    • Replies: 3
    • Forum: Australia
  8. fishkake

    Live wire breakout adapter

    Hi there - some of you might have seen my previous post about current-measuring CT clamps. This is another question about them! Once again I'd like to make it clear that I am not an electrician; my understanding of what you guys do is more than a layman, but mostly conceptual rather than...
  9. N

    Ethos 8600 EV test adapter

    Has anyone used the Ethos 8600 test adapter? The ethos-instruments websites have a user manual button, but nothing downloads. There are no youtube videos as you get with other brands of adapter and the basic leaflet included doesn't have sufficient info. Pre-purchase, I was concerned about...
  10. msibart

    faceplate adapter 3 to 1 step down

    Hi all, Newbie here. I have moved into a house where there was a 3 gang dimmer switch controlling 3 parts of one room. was a bit excessive and I want to combine them all into one, having converted them from halogen to LED downlighters. Now the faceplate is double size and the smart dimmer I...
  11. B

    Fuse Box RCD vs RCD Adapter - which should trip first?

    In an attempt to isolate for certain whether my fridge freezer is causing my main RCD to trip or something else, I used an RCD adapter in the socket that the fridge is plugged into. (Note - The tripping had stopped after unplugging the fridge freezer, but because it’s the second appliance to do...
  12. Z

    Melted Double Adapter and Power Drops

    Hi, just found this forum! I'm in Australia Maybe people here can suggest what may be causing a power issue I have. Appreciate any suggestions, thanks. Problem: I've had an ongoing issue where power points in the house are losing power randomly for a moment and then coming back on. Its like...
    • Zapion
    • Thread
    • adapter ausie elec double drops loading melted power
    • Replies: 3
    • Forum: Australia
  13. C

    MR11 -12V spot lite not working with 12V wall adapter

    Hi all, Im back here again. i have a couple of R11 12Volt 20Watt G4 Bi-Pin Base bulbs tha i salvaged from a backup lighting unit. I have tested them on my car battery and the are working. I would like to use one in my house as a spot in my stairwell area. So i have tested it eith a 12V 2A wall...
  14. C

    Anybody know what kind of adapter this is?

    Anybody know which kind of adapter this is? It goes to some string lights at my restaurant. Trying to find a replacement.
  15. W

    2-pin to 3-pin Adapter

    Hi I’ve got a Logitech Wireless Charging Pad for charging Apple AirPods. it’s rated 10 Watts. Trouble is, it’s got a EU 2-pin plug. Can you advise what 2-pin to UK 3-pin Adapter I could safely use, pease? Can an ordinary Shaver Adapter for example be used or would this be unsafe? Thanks for...
  16. Zerax

    Metrel EVSE A1532 adapter and Type 1 tethered

    Need to get an EVSE adapter for EV Charger Point installs... and thought I'd upgrade my MFT at the same time... tempted by the Metrel MFT and EVSE adapter combo. However, it looks like the A1532 adapter only supports Type 2 cables ? Is there a different adapter that can be used to allow testing...
  17. _KaCe_

    What is an adapter added to a Carlon box without threads, to give it threads, called?

    I bought 20 boxes for an outdoor project. I paint my parts before I install them so they look nicer than trying to paint them in place. That said, I now need to change the box from a smooth terminal hole to a threaded. I also need to have this part go from 3/4" to 1/2". I am not sure if there is...
  18. W

    UK 2-pin to 3-pin Mains Adapter

    Hi Guys I need your advice.......... Purchased a Logitech Powered Wireless Charging Stand for iPhone but because it is a discontinued item the only source I could obtain one was from EU. Consequently, it is only supplied with a two-prong mains plug. It delivers up to 7.5W charging to the...
  19. B

    PCB Laser Adapter for Ender 3 v2 STRESSSSSS

    Im trying to build a pcb board for my 3d printer that will connect a laser module to my ender 3 v2. Here are the links to the article and the linked github with the pcb design. https://blog.pasqualefiorillo.it/3d-printer-pwm-ttl-laser-adapter/ https://github.com/siddolo/3Dprinter-laser My...
  20. C

    Wall switching method for 12v adapter powered devices?

    I'm not a pro, just looking at strategy for a village hall install. In the bar area, there are a number of devices which need to be switched on in one go. Some LED lights, a video monitor, wifi externder, other low power stuff. They are the type with the plug in 13A to low volt wall adapters...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock