Hi All,
I wondered if someone might advise me on an issue I am having.
I turned off my power to replace a plug socket in my house and when I turned the power back on, the burglar alarm started going off. Unfortunately I have just bought and moved into the house and I do not know the codes...
I've bought a new house and I'm basically starting again on it
I want to have a go at wiring the house alarm
Do I take it as a radial circuit to the detectors and split up stairs with down stairs then wire the key pad and the outside box separate
Any advice would be appreciated
Hi
I have purchased a Hawk alarm and fitted all wires apart from the one central locking wire. I have purchased the Haynes wiring diagrams also but just need an expert to tell me the wire colour please. The wiring diagrams I have bought are attached.
Thanks
Hello
I’m a relatively new spark and have avoided installing wired security alarms instead opting for wireless systems for customers.
I have a rewire currently and the customer is wanting a wired system.
Am I right in thinking I can daisy chain the sensors and keypads?
They have a three...
Easy installing and programming wireless fire alarm system. The professional RF wireless fire alarm for commercial and industry fire security project. Each alarm panel has 2 loops and can equip 128 points of detectors, manual call point.
New technology more secure for home and business safety. Solar wireless break beam intruder alarm system can be easy installed without wiring or power cable or signal cable. It is the best outdoor security protection for yard, garden, courtyard or farm, pool, garage etc.
How to install solar...
Hi everybody!
I'm wondering are you happy with Aico easy-fit base? I like nest style much more, but they are not compatible with bs5839-6.
I'm wondering why aico didn't put something nest-like agains what do they have today. Here is the example of what came to my mind - Would you use a WAGO 221...
As (I believe) PAT testing includes fixed equipment connected to the electrical installation by an FCU (eg hand driers, built in ovens etc.) I have been trying to figure out if a Fire Alarm control Panel should be PAT tested and if so by who. Has this subject been addressed before? Does anyone...
Site Security Services (London) Ltd
Due to expansion our well-established Company is seeking experienced Alarm Engineers,(Scaffold and Domestic) Hoarding Installers, CCTV Installation Engineers and Satellite Dish Engineers to join the team.
We Install alarms and lighting to scaffold on...
Hi,
I have an aico alarm system which was mains powered and interconnected when installed 3 years ago. It's not been maintained and when I took a look recently, a couple of the detectors are missing. Only the ceiling plate is on the ceiling. Also, the interconnect isn't working. When I test any...
How do I make a door alarm using a detex reed switch, SDC electric key switch, and a federal siren? The concept is that when you open the door the alarm goes off and you could only turn off the siren when the with is turned using the key.
Hi everyone,
I apologise if I post this in the wrong place but I could really use some professional advice on this.
I live in a rented house and the fire alarm started beeping continuously, like when it needs the battery replaced. Which me and another tenant replaced and then it started...
Good afternoon all,
Our company installs fire alarm systems in convenience stores but it's always limited to a conventional system whether it be 2, 4 or 8 zones.
However, a store has come up where the existing alarm panel is in a communal area of the building.
The existing panel is a 32 zone...
Hi. My mother bought a miguard g5 system a few years ago. It looks like the control panel has given up on her!
She has all the sensors around her home already but the control panel appears to be obsolete now. Am I correct in thinking that any 433mhz control panel will work with the sensors she...
Hello. How do you replace an optima xm6 outside bell box. What would be a reasonable replacement and what connections would i find in the box.
Thank you for your help.
Full rewire job....
Full rewire on fully refurbished and decorated property... Loft has been converted to a room but not heated but is no way classed as a habitble room as building control have clearly stated due to numerous reasons including height being about 5ft at the highest point and the...
Hi I’m new to the forum and have no electrical background other than changing plugs and light fittings at home. My house was recently targeted by burglars attempting to get in the house by snapping the lock whilst I was asleep. So I have had an idea to fit a solar powered PIR light pointing...
Good afternoon...
Can anyone tell me whether additions can be made to a protec algo tec 6300 fire alarm, without proprietary software or leads?
Have not investigated the job any further than knowing, the system is around 10-12 years old, addressable, panel is Algo Tec 6300.
Protec is not...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.