boards

Recent contents Top users
  1. L

    What do you do about boards like "Fusebox" etc not been able to keep lid open ?

    I get the safety aspect ...But using likes of gaffer tape etc etc when I want the lid open but not remove cover etc drives me mad !
  2. R

    What are your thoughts on people wanting to be ultra neat when wiring inside boards?

    I get wanting to do a good job but does being super neat inside a board really make it a better job? I don't see any advantage to it aside from aesthetics and if it's something that's not seen then....what's the point in obsessing over how neat it all looks? To me it's a bit like a kitchen...
  3. W

    UK Hi, do Eaton Memshield mcb's fit the previous Eaton split load boards?

    Hi, do Eaton Memshield mcb's fit previous version of Eaton split boards code (EAD32b) for example?
  4. D

    The Future of Fuse boards...?

    Looks nice
  5. R

    Any know what RCBO fits these boards? I need to change the B6 MCB

  6. timhoward

    Which mid-range boards (if any) have Type 1 SPDs available

    Next week I've got a single phase CU change that's a sub-main fed by an over-air cable run supported by catenary wire. By rights I believe this should have a Type 1 SPD. My normal go-to board (Fusebox) doesn't seem to list a Type 1 device in their catalogue. I wondered if anyone can suggest any...
  7. R

    Distribution boards location

    Hi, I have never come across this before but is it OK to put a DB on the ceiling. We have had some cabins in and the db's are all on the ceiling. I have said this is wrong but my supervisor insists it is OK. Any input would be appreciated.
  8. B

    Sources for SPD RCBO type A boards.

    Hi all, With Amendment 2 here has anyone found any good suppliers for SPD and RCBO domestic boards? I've found online a BG SPD + 8 RCBOs for about £190 which is about £40 cheaper than the local wholesaler. Are there any better deals out there for decent boards (I've seen 'Live' offering online...
  9. D

    Bundy makes the Rolls Royce of temp site boards ...

    (In the old days we would just lop off the plug top of a 4 way extension lead and wire the flex straight into the meter for a temp site hook up)
  10. BiddeldyBwah

    Do 3 phase boards usually have RCD protection in commercial settings?

    Just sat contemplating life and realised i don't think i've ever seen any RCD protection on the boards we maintain/install at work. I've seen 300mA protection on some section boards but don't recall ever clocking a 30mA in a 3 phase board. Am i just not looking properly?
  11. Electrical2go

    Are you going to give the NEW Elucian by Click® Consumer Boards and Wiring Accessories a try?

    Elucian by Click® brings to the market a comprehensive Consumer Unit and Circuit Protection range. Covering a broad range of installations and offers a number of features and benefits that will enhance the products’ convenience, flexibility and safety properties. Don't forget if you haven't...
  12. Electrical2go

    Electrical2Go are now selling Priority and Non-Priority EV Boards from Garo

    ENHANCED PROTECTION FOR MODERN POWER DEMANDS Innovative, Protective & Efficient Effective and easy to install solutions to safely manage the load between multiple electric showers or an electric shower & EV Charger. Protect your main incoming supply with GAROs Priority & Non-Priority Boards...
  13. V

    Max Zs multiple boards

    Had a bit of a brain freeze. Got to go and do an inspection on a property with 2 consumer units, the 2nd fed from the first on a 50A MCB. Let's say theoretically I get 0.2 for the Ze on the main board, then 0.3 for the Zdb at the second board and 0.2 for R1+R2 on a ring final on a 32A MCB. Is...
  14. K

    Installing dual RCD boards 18th edition

    Hi sorry in advance if this is a silly question but I was recently told by a friend who is an electrician also that dual RCD boards are no longer acceptable according to the new 18th edition hence why they've become cheap to buy. I understand that RCD protection is a must and RCBO is the best...
  15. johnwicklover

    Carrying out a refurb on old panel boards, worried about discrimination.

    I am carrying out a refurbishment job on this old panel board and fitting in a new panel board from Schneider. The current supply to this building is a 100amps BS88-2 Gg (assuming). I am planning to protect the outgoing submains with the NSX100 ML 2.2 set at 100 and 63 respectively. I don't know...
  16. F

    SWA sizing for sub boards

    Hi guys, I'm working in a new role which requires me to size SWA cable to feed sub boards which in turn supply EV chargers. I noticed on the jobs that have been done already they have used 50mm 4c and 70mm 4c to feed 3ph 250A main switches on the sub boards. Going by tables and calculators this...
  17. F

    No isolation of Neutral in Single phase boards

    As title. Doing an EICR, have come across a couple of DBs, where the neutral goes straight onto the bar on Single phase boards. Whats your views on this guys? Should it have a requirement to be isolated? Is there a reg for? If so then it can be coded. My boss thinks its dangerous. I don't, but...
  18. D

    boards with mixed breakers

    I have been trying to get hold of BM RCBOs without much success and having inherited a job where BM are being used and some of the boards at these premises have had added other types of breakers and it is a problem with some insurers and don't really want to change the whole board if I could...
  19. L

    LED driver for my boards

    Hey and thanks for reading, I'm in the middle of purchasing three of these boards (each draws 135 watts, so 405 watts total) but am struggling with all of the Meanwell 480w options. Can't quite wrap my head around anything other than the wattage and would appreciate hearing from someone with...
  20. J

    Running cables in skirting boards

    Hi guys, Just wanted to ask if anyone knew whether its ok to run twin and earth in a purpose built skirting board designed to enclose cables. I have seen pvc skirting boards and mdf skirting boards that are specially designed to enclose cables. All you'd have to do is a chase on the wall down...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock