boards

  1. gazdkw82

    Fully loaded boards

    Looking at a domestic RCBO 10way board which includes SPD and AFDD protection. Iv looked but cant seem to find a board that offers all these things. I thought hager offered RCBO's with AFD protection, but I cant seem to find it as 1 package. Fusebox offer a decent 10way SPD board but the...
  2. T

    Plastic boards under stairs

    Can anyone point me to reg that says about plastic boards under stairs or does one not exist On an EICR and they have a plastic baord under the stairs.. C2 or C3?
  3. V

    three phase board separation

    hello everyone, I have a little problem. I've got a three phase board, it has the three phase sauna, one phase lighting and sockets connected to it. The problem i am facing right now. This is a comercial unit. So the problem is that the sauna makes the RCD trip every so often. And the board...
  4. S

    UK Sockets in skirting boards

    Just been watching the daily briefing from Downing Street and was amazed to see sockets and accessories mounted in the skirting. Perhaps it needs a rewire.
  5. Gavin John Hyde

    Wd40 and fuse boards.... Anybody tried it?

    Had the WD40 out earlier cleaning my fiancees bike up. Saw on the side they suggest it can be sprayed into mcbs on a fuse board. Can't say I have ever thought of that. I know it can be used on contacts but it somehow seems wrong to be spraying a liquid into a fuse board as shown on the can!
  6. Stevetheaviato

    UK asked to do work alone that you dont feel competent enough for ? worried about losing my job

    So recently i have been given a lot of changes to the work im used to, quick example = im ok with single phase boards but i am not competent or confident enough in three phase. My boss is a very angry guy..... should i just go for it or should i refuse until i have training ? cheers
  7. HappyHippyDad

    Will the new eaton mcbs fit the old eaton boards?

    As in the title. I have an old eaton board. Will new the new eatons fit? Cheers guys.
  8. M

    Eicr communal boards

    Hi guys I'm having major works being done on our flats by the council. There is no periodic inspection lables on the boards in communal areas. How many years is required between each periodic test?? Council said it an be up to ten years??? I sure it was no longer than 5. Any advice would be...
  9. J

    Testing Crabtree Boards

    Hello all, I'm curious. Crabtree boards with their moduler click in busbar system. Does anyone have a trick to linking the busbar and the earth for continuity testing at all?
  10. timhoward

    Multiple distribution boards and earthing arrangements

    Hi all, first post, and it relates to quite a challenging installation. The short version is that I'm working through remedial work on a 75 page EICR on a site with 24 distribution boards, hit a very nasty C1, have resolved it, but now have max Zs issues that were actually there before but not...
  11. M

    Advice needed On 18th edition boards. When do fit SPD boards?

    I’m An NICEIC DI. I haven’t got around to doing my 18th yet and I haven’t got the new literature. How do you determine if you need to fit an SPD board. Should I start fitting these on all my jobs now?
  12. C

    MCG fuse boards not impressed

    Anyone else use MCG fuse boards before and never hand any issues or reports of them being poor in reliability long term? recently had to carry out a DB change and due to size and the main switch on the LHS I was advised by CEF to use MCG. The quality of the board was not brilliant and I only...
  13. Electrical2go

    18th Edition - How has it changed what boards you buy?

    We're interested in what changes you've made to become 18th edition compliant. We want to ensure we're stocking what you need most at Electrical2Go. So Overload and Surge Protection... Are you buying fully populated 18th Edition boards? Or buying cheaper boards and adapting? Cheers...
  14. Mark42

    6kA (Not 10kA) RCBOs in commercial TP boards: Why not?

    I'm fitting two replacement sub-mains panels as part of a long-term upgrade from split-phase to three phase on a part-domestic part-commercial site (my own gaff). I'm using all RCBOs because I like them, but am less keen on the cost of the commercial variants ... Fellow spark says one MUST use...
  15. D

    Earthing for 3 phase boards

    Hi just after opinions on this one got three 3 phase supplies all 25mm 4 core swa, armour not been used for earth would you run a seperate 16mm earth for each supply or just loop all the earths from 1 16mm all the supplies are right next to each other
  16. L

    Meters and boards Question

    I work for a company who installs electric heaters. Usually we remove old storage heaters and replace them with our heaters using the same point with a new switched fcu. The fuse board is usually just an old Wylex type with just an on off switch and non switched fuses. The board is powered...
  17. P

    E7 boards and meter tails

    ok a couple of questions ill keep it simple its been ages since I had anything to do with E7, is an E7 board supplying storage heaters still ok on a non rcd board ie classed as fixed equip ? who is responsible for the tails? from head to meter and meter to board thanks
  18. S

    For Sale Single Phase & (some) Three Phase Boards & Devices

    Afternoon all, I've had another clear out. I thought I'd offer it up to you guys before I whack it on eBay. I'm ideally looking for an offer on the lot, however i'm happy to take offers to suit what you need. Here's what's available: 1 x Single phase 11 way consumer unit 100 amp incomer -...
  19. D

    Electrical inspection and old boards with asbestos

    Hi Guys just been asked to carry out an inspection at a warehouse. Got there and first two boards I saw were the really ones with rewirable fuses asbestos flash tape and exposed bus bars. There are a couple of new boards as well My question is should I just carry out a visual and fail it...
  20. N

    EICR - 2 boards, 1 with an off peak split and one with regular supply

    Hi there, im looking some general advice related to this eicr. im a bit lossed here, so would it be 2 eicr? or do i just splice two sheets together with the relevant information? on a seperate not i also noticed today when i had a wee look that his main water bond cannot be verified, is this a...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock