brackets

  1. Pat H

    Cable tray supports needed

    I'm looking at fitting some cable trays in a domestic loft. I need them to sit 150mm above the current ceiling joists running across those joists. I'm struggling to find and tray supports that stand up from a wooden joist. Plenty of options to hang trays but that's not practical. Any ideas...
  2. C

    Vertical tv brackets

    Hi Lads , got asked to hang a tv for a friend of mine but they want it vertical/landscape. do yas know if if i need a special bracket. i cant seem t find one. its a 55 inch but i need it to have an arm to come about 400mm of the wall. Any ideas would be greatly appreciated
  3. V

    USA Eaton BR panel: what are these brackets for?

    I noticed some brackets along the sides of two breakers in an Eaton BR panel board. One is along one side of a 20A Type BR Combination AFCI breaker (labeled for the dishwasher and disposal), and the other along one side of a double 40A breaker (for the Range). They look somewhat similar to a BR...
  4. HappyHippyDad

    Any brackets to hold large floodlight to telegraph pole?

    My client wants to fit a very large floodlight 240w LED (Wirefield LED Commercial Floodlight 240W - http://www.rexelenergysolutions.co.uk/product/2500671142/Wirefield-LED-Commercial-Floodlight-240W-) to a telegraph pole. I was wondering if anyone knows of any brackets to use to attach to the...
  5. K

    Question help

    any help with this greatly appreciated..the output of a series dc motor when connected to a 230v supply and running at 1320 rev/min is 3.5kw. the supply current for this loading is 20.5A 1.calculate torque developed 2. Operating efficiency
  6. B

    Cable tray install

    hi all Need some help here regarding cable tray installation on uneven suraface. This job was done a few weeks ago and need to wire a new supply for a sub main board. It's a new restaurant that is getting done. So need to supply power for kitchen appliances. My question is regarding cable tray...
  7. D

    street light flood brackets !!

    where can i get these from online ? this pic is taken from an irish webpage, anyone ? thanks dafydd
  8. G

    Does anyone still fit panels on slate roofs

    Hi looking to see if anybody fits PVC panels on slate roofs, reason being I have 483 schueco brackets, for sale
  9. R

    Suspended ceiling brackets

    I've been asked to move the existing lighting and put some new lights in a shop, customer has brought the fluorscent lights, I did suggest modulars but looks like they want to do it on the cheap. The existing lights are drilled and screwed to the framework of the suspended ceiling, are there...
  10. D

    pre victorian wooden building

    Hey guys, im starting a project where the building structures are as described above but at some point (possibly original) rendered on both sides. This is new to me and I would be really grateful of any info you may have for me. It is a high street and the owners would like brackets fixedto the...
  11. G

    Solar Limpets

    About to order the kit for a plain tile install next week and considering trying Solar Limpets plastic brackets. I saw them at Eco-Build and can see how they could save time (which is not really an issue at the moment). I am just wondering if they comply with regs and offer any benefit other...
  12. S

    Brackets for Hardrow Slate Roof

    I am looking for suitable brackets to fit panels onto a Hardrow Concrete Slate Roof. I've been in contact with the Hardrow technical dept and they do not think a suitable bracket exists. The problem is that the bracket has to extend about 10 inches over the slate under it, since this is the...
  13. D

    Mounting on Redland Grovebury profiled tiles

    Hi, Looking for advice on the best way of fitting brackets with these tiles: Monier:*Redland Grovebury Roof Tile | Traditional Concrete Pantile Roof Tile Clearly if we fit brackets to the rafter, depending on where the rafter hits the tile, we will need a different height of bracket. To...
  14. 1

    Landis meters (2) and Schuco Slate Brackets - Spare

    Have 2 Landis meters with extended covers and around 40 Schuco hangers 256313 spare. If these would help anyone PM me.
  15. S

    Brackets for solar panels

    Hi all, had my MCS assessment and assessor stated the aluminium brackets needed to be MCS approved? Is this right? I thought it was just the panels? Surely if the metal conforms to EN 10088-1:2005 e.t.c. this will suffice? On a separate note, what is the general consensus on here regards FIT...
  16. W

    Conergy end clamps & brackets

    Does anyone know where I can get conergy end clamps for REC panels which are 38mm thick? Urgent of course!!! We are based in South East Many thanks
  17. B

    PV roof brackets on interlocking slate effect tiles

    Hi all, I surveyed a property today for a PV install and the tiles are slate looking interlocking tiles. They are as thin as slate, and all nailed down. I do not want to use anchor bolts due to the weatherproofing problems. Just wondered if anyone has fitted a system to a roof like this and...
  18. C

    Schuco rafter brackets

    Hi Guys I normally fit 256311 rafter brackets but have recently tried using 257121 to make life easier by giving some sideways adjustment to sit in the valley of the tile. However these brackets are very high and require not onlly cutting of the tile below but also adding lead flashing. Without...
  19. M

    Panels on sagging roof

    Hi I've got a roof to do a quote for, part of which is on an old part of the house which is about 4m wide. It has recently been re-roofed but still retains the old 'sag.' Over the 4m, it probably sags about 50-60mm at the centre. Now, I could discount that part of the roof but it could take...
  20. S

    Fixing brackets for Concrete tiles

    Can anyone recommend a suitable PV mounting bracket for large flat concrete tiles. PS first time on here so any help would be great. Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock