broken

  1. Moon Dog

    Broken Wire Inside the Wall

    I bought this house a couple months ago. It was built in 1952 (same as me) but has been rewired with yellow 12 awg Romex dated 2007. Looks like a professional job. When I first moved in the back door outside light worked, but it recently stopped working. It wasn't the bulb, so I checked it with...
  2. J

    Broken Pin on Motorcycle CDI unit

    Hi there, I'm looking for a bit of friendly advice whilst trying to fix my motorbikes cdi unit. One of the pins corroded and came off and i was hoping to find the location of this pin on the pcb, solder a wire onto it and bypass it. I've cut through the protective outer layer and located 36...
  3. monolopcidy

    USA Is my ASUS Laptop fixable?

    My ASUS laptop has been sort of broken for a while, instead of replacing it we thought that it might be repairable? Its missing both hinges and that one bottom border on top of the screen, it turns on but the screen stays black and it charges normally. And the screen is connected to the keyboard...
  4. M

    Broken Amica fridge freezer - repair or not?

    Hi all My Amica fridge freezer has packed in just over the 2 year warranty date; typical. I'm also moving house very soon and will have a built in unit so don't actually need it - managed to source a battered second hand one for 50 quid to last me a few weeks. My question is: is it worth...
  5. D

    Broken MVHR unit advice

    Hello all, I’m looking for some advice regarding a recently broken MVHR unit in my flat, model Heatrae Sadia Advance. The unit is out of warranty and Baxi, who provide product support, have suggested I employ a Heating & Ventilation engineer to diagnose the problem. Before I do, I would like...
  6. S

    Two tellys with black screens

    Telly seemed to be on the fritz and then we couldn’t get it to load up a screen at all, power on etc, light flashes when using the remote but no picture. Pretty old telly so figured it was time for a replacement. New telly arrived Thursday, working fine, tried to turn it on this afternoon and...
  7. R

    Panel Heater broken, can be replaced?

    Hi, Obvously im not an electrician, but i can just replace this broken "fuse box" at this heater with insulated crimps instead or something similar, without blowing up the house? Not sure what the connection is in the broken one (see attached). Has this odd metal bit on the back of it. Any...
  8. I

    Finding a broken wire

    Hi all, I have been installing CCTV camera for a few months. But right now, I have been placed on the service team... I am supposed to replace a 300 meters long cable for a faulty CCTV camera. Another member of the team has identified the fault to be the cable (one of the wire is cut somewhere...
  9. S

    Suspected Broken PEN conductor on TNC-S system

    Hello everyone, I’m based in the ROI and live in a rural location. Yesterday evening my electricity supply started to switch on and off randomly. After waiting for the evening for it to come back on it still has not. I checked my neighbors who are on the same DSO as my house and they all have...
  10. saunaQ

    Reusing heaters from broken sauna.

    Hi, I bought a portable sauna, it came with a fuse board attached to the outside wall, this fuse board connected to the power outlet on the wall. This fuse board also connected to 3 heaters. The sauna doesn't work anymore, I assume there's something gone wrong in the fuse board. I think the...
  11. D

    Broken retaining tab on car connector-can it be fixed

    Hello guys, while doing some job on my car, the retaining tab on the rear differential controller connector broke off. The connector looks like this: Circled is the broken tab. Since the connector is part of the controller (what a stupid idea)-it can't be replaced... Do you guys have any ideas...
  12. B

    Xmas lights end socket broken

    can you use a 5.5mm 2.1mm 12v DC Connector Plug Power Jack replacement as Xmas lights end socket broken off - the voltage through the adaptor is 31v max 6w ?- but no problems with the adaptor which is a Czjutai Power Supply JT‑EL/FC31V6W. I cannot find a higher voltage replacement power...
  13. D

    BT incoming cable broken any ideas on how to reconnect to master terminal

    Ive managed to fluff up my bt incoming cable and from what i can find out there are two wires, one orange and one white that should go to terminals 2 and 5 on the master socket - anyone any ideas please?
  14. S

    FAAC gates not auto closing. Broken wire

    Hi. I have a set of FAAC gates. They work on a master switch a sim card opening system where my phone opens the gates. Everything was working perfectly until last week when the gates opened and closed ok but when the photocell was tripped the gates wont close unless you dial the number or flick...
  15. Electron

    Where can I get parts to repair a customers broken lamp post? Only two of the three lamps work but all are badly corroded.

  16. A

    UK Broken Fire Alarm due to leak

    Hi everyone, I apologise if I post this in the wrong place but I could really use some professional advice on this. I live in a rented house and the fire alarm started beeping continuously, like when it needs the battery replaced. Which me and another tenant replaced and then it started...
  17. timhoward

    Calculating broken PEN touch voltage with backup earth electrode

    My brain has been exercised a bit by this. Am I on the right lines with this extremely simplified example: If we take: -TNCS installation with a Ze of 0.2 ohms. -Plastic services, nothing bonded, keeping it simple -Line conductor resistance from supply transformer should be similar to PEFC and...
  18. J

    Broken Fluorescent Ballast - no longer available - options?

    I have a bathroom mirror with 2 x 21W fluorescent T5 tubes and an IR sensor. The tubes switch off after a few minutes. I have changed the tubes and the fault persisted. I checked the output from the IR switch and it was 240V so that leaves the ballast as faulty. The problem is the ballast is...
  19. M

    Can I replace broken light switches and old roses in a communal area without electrical certification?

    Hello - a light switch in my communal hallway has died and the rose is in need of replacement too. I have permission from the freeholder to do said works however was wondering if I need a qualified electrician (NICEIC) to do said works or can I do it myself - I've done many such jobs before and...
  20. A

    Anyone have any ideas on how to remove a live broken screw from a meter

    Anyone got any ideas on how to get a live broken screw out of a meter?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock