Hi all,
Wasn’t sure where to get some information, so I thought I’d ask the question here! FYI I have no electrical quals, I build custom motorcycles as a side hobby and have built a fair few looms over the years, all be it simple platforms.
Im in need of a little advise if something is...
Good morning all,
I am currently working on a House in Multiple Occupation (HMO) consisting of 10 flats, with three parking spots equipped with electric vehicle (EV) charging capabilities.
Our building has a single incoming supply (UKPN 200A cut out), which feeds into a Ryefield board. From...
hi all, i have a problem of over charging on my 65 s type jag. i changed the voltage regulator for a new after market one same as what was on the car and also tried a friends genuine lucas one and they all read the same. i get 18.3 volts at the battery at 1500 revs and 19.3 volts at 2000 revs...
Hi all,
Has anyone here had any experiance of installing a Porsche 11kw 3ph EV wall charge unit ? We've not done many EV installs to date but the ones we have done have all had O-PEN protection built in to the units, (Easee)
The Porsche unit is basically a fancy looking empty box that comes...
Hello, I need to conduct interviews with experts in the relevant field for my university project. The topic and product that I’m developing a business plan for is a device that charges household appliances wirelessly – a Wireless Multi-Device Charging product. Could you provide me with your...
Hi guys. It would be really useful to run this past you and get a consensus/input from you for what would be a realistic amount to charge for an upcoming job I've been offered.
I've been asked to quote for a private job, and I'm stuck with what to charge. Most of the stock will be supplied and...
Hi all. Just trying to get a feel for what everyone is charging for a commercial or industrial EICR with or without the previous report. Seems to be a bit of a minefield! Any serious advice greatly appreciated 👍
I have an interesting scenario that could use some feedback.
I have 200A service in my home with a sub panel running to a detached garage (actually an old barn). The breaker running to that sub panel in my home is a 60A breaker but the main breaker in that sub panel is a 100A breaker. I was...
Hi All,
Im quoting to install an EV charger (Dont worry - fully registered, but only been 2 weeks so i'm still picking bits up).
Consumer unit in the Garage which is soon to be converted, all cables to be conceiled at some point. EV charger to be installed at front of converted garage (approx...
Does anyone know of a way to replace standard 13a double plug sockets with a version that would connect to a user and charge the user’s account? The sockets are in a communal area and could be used for various activities including car charging or vacuuming etc? I’ve seen pubs use a key fob to...
looking at getting started with ev charger installs, wondering if this is worth doing? do you get many requests? do I need qualifications and any tips to get started.
cheers
Assuming a large company needed a large EV charging infrastructure for its fleet to be electrified. Would it be best to just go straight for 150kW chargers? And if so, what would be the ideal setup (cable sizes for 150kW, connection to grid, load balancing, other equipment that might be needed)...
Hi,
I have a 6kw PV with a 6kw Growatt battery and invertor. I have a solar iboost going to the hotwater tank. Recently I had a Ohme Home Pro installed.
My issue is the iboost and Ohme don't appear to work in sync with each other. The iboost previously sent all excess energy to the hot...
Is it possible to charge my battery bank from one combined source coming from solar panels (via Victron Smart Solar Charge Controller), Victron battery charger (via shore power when connected) and an
alternator (via Victron Orion-TR Smart DC-DC)?
All sources lead to one common busbar which then...
Could i get some thoughts pls
Podpoint 7KW untethered installed 2 yrs ago, working fine with EQC mercedes.
Solar panel installed 3 yrs ago.
Last weeks installed growatt solar battery with ac coupled inverter.
First 2 nights on Octopus Go Tariff 00.30 to 4.30 both EV and Growat battery charged...
Hi, I bought a car battery charger and plugged it on my car battery to test it (normal battery not AGM). my battery was probably already fully charged because I drove with my car just before using the charger. So this happened: the voltage on the charger started at around 12v? (not sure...
I installed a new 50 amp circuit to charge my EV.
Some specifics on the circuit - 50 amp breaker, 6-2 ga copper wire (UFB because in the future I may place the charger outside and wanted flexibility), NEMA 6-50 plug, Grizzl-e charger at 40 amps.
My question is on the breaker itself. I have a...
Hi all and thanks for letting me join your forum. I am an old school electrician who has now retired.
So I need some advice, please. I have just moved into a new build house.
It has a 6mm swa cable that terminates in a waterproof box at the side of the house, which then feeds the garage. it s on...
Now I haven't charged a car battery since my teen days but it seems our two year old car like many now are dependant on a good charge for all the functions to operate, the stop/start rarely works and the dealer who we know told me what I already knew it does not go far enough each day. They have...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.