cheaper

  1. N

    Advice on 'Cheaper' brand / for CU upgrades, PRS EICRs

    Hello, Would like some opinions. We have quite a few CU upgrades to complete. These are PRS properties, and looking down the list, a lot will be TT. Since Amd 3 we have used Hager CUs. Decent quality, also like the little meter tails clamp for TT. However, the cost is prohibitive, especially...
  2. Marti

    Milenco Van Security Dead Bolts. Cheaper than ArmaDlock

    What are you guys using a additional physical security on on your vans? Assuming no-one is foolish enough to be relying on the OEM door lock and immobilisers. Being freshly minted, that is fleeced by various insurance and CPS bodies, I chose the DIY option and bought three Milenco Door Bolts off...
  3. Matthew007800

    Switched Sockets Cheaper?

    Hi, I was wondering why UK wall sockets with a switch are cheaper than those with no switch. This doesnt make any sense to me as surely the switched sockets should cost more as they have a mechanism. Examples of this is: MK 13A Unswitched Double Socket K781PPK | Wickes.co.uk -...
  4. C

    NAPIT Certification Scheme NAPIT OR NIC

    Hello guys I am really conflict as to who I should go with as i am looking to go it alone this year. Napit are cheaper and less fuss - however the brand is not recognized that well Napit appear to be allot easier to start off with because they only want to view one job, they also seem...
  5. Dan

    New Insurance Deal Gets Forum Members Cheaper Insurance!

    Insurance for Electricians - http://www.electriciansforums.co.uk/forums/insurance-for-electricians.40/ Checkout the new insurance pages. Get yourself some quotes and let me know how they seem to you guys compared to your existing prices. Thanks
  6. Leesparkykent

    200A load break switch/switch disconnector.

    I have a job on ATM where the client has been done over by the builder for 65K leaving the job which is 13 new build flats near completion but the client is running out of dollar pretty quick. I'm doing my best to help out by finishing the job but due to the concerns over money I'm getting paid...
  7. L

    Private Work

    Hello All. Here's my situation, im currently NICEIC QS where I work, im earning a half decent wage but its never enough right. Im debating with the idea of setting up on my own but the thought of trying to replace my salary is frightening, mortgage and family so very risky. Not got enough...
  8. V

    Step Drill Bits

    I have a metal clad CU that I am currently installing, it's the MK Sentry one and I want to use the Wago Sprint glands on it. They make a Sprint gland that is 25mm and will accept 2 x 2.5mm T&E for a ring final. The problem is all the knockouts on the box are either 20mm or 32mm. If I bought a...
  9. brucelee

    Amd 3 2015 books

    Hi to all the forum members, I just wanted to ask does anyone know where I can buy the new amended 2015 versions of the Regs, OSG, and related guidance notes. Preferably cheaper than IET, Elecsa/NICEIC or Amazon Also why does the forum not have a sponsor that they could negotiate a Better deal...
  10. F

    wholesalers or screwfix

    were do most shop im finding of late screwfix to be cheaper than the local wholesalers your thoughts
  11. D

    Best competent person scheme

    Hi guys, ive always been employed but I am thinking of going it alone this year. What do people think the best competent person scheme is to ensure compliance with part p. ive herd you have to of been trading for a year for the NIC and was wondering if others were cheaper or had less paperwork...
  12. T

    Panel heater recommendations?

    Alreet. I always use Dimplex heaters but a customer has asked if i can have a search around for a cheaper option. I need 1 x 3kw and 2 x 2kw panel heaters with 24h timers built in. Can anyone recommend any cheaper brands they have used? Max
  13. O

    Underfloor heating mats

    Hi, I'm going to be installing underfloor heating mats (150w) but I'm after some advise on the insulation boards to put down first. They seem expensive I was wondering is there a cheaper alternative? Or am I going to just have to buy the boards they recommend with the mats? Iv never installed...
  14. J

    Where to stay for long term work? :)

    As I've mentioned in my previous posts I'm heading down London managing a big install and was wondering where should I be looking at staying? There are going to be 4 of us for about 9-12 months in the greenwich area. A have been looking at renting a flat/house Was just wondering what you...
  15. C

    ELECSA Certification Scheme how many of you have left elecsa or niceic for cheaper alternative

    as above, just had letter through from elecsa to renew at a cost of £444, out of every job i have done this year 99% of them didn't even know what part p was and wasn't bothered, the other 1% didn't care less who i was with as long as i could register the job, so now i get to thinking do i just...
  16. S

    Cable pulleys/Heavy duty cable installation

    Hi guys going to be putting 2 times 95mm2 5 core onto a ladder system and was wondering where i can get pulleys from and wheels to mount above the ladder so when its pulled in its not in contact with the ladder system and then it can be placed onto the ladder once its all been ran in? Or what...
  17. M

    Debate "Is more expensive better than cheaper?

    I have been following a lot of posted threads with interest, some started by myself regarding Pricing – Cost of materials, Why is it so expensive, etc. What has struck me with most on the replies, is that many, if not all automatically assume, and get all judgmental, with lots of hand ringing...
  18. L

    Stroma Certification Scheme stroma

    Are any of you guys with stroma? Got my assessment on Thursday just wondered if they was any good? I was with napit but this year couldn't afford the fees with these Electrical Trainee taking all work can't seem to beat there quotes. Been sat at home for the past 3 weeks
  19. C

    2 showers off of 1 supply?

    I have a customer who has an existing electric shower fed by 10mm t&e, cable is buired in wall(plasterboard) fitted when house was built approx 13 years ago. They now want another electric shower fitted to the ensuite but does not want the house torn apart to run a new cable and doesnt want...
  20. B

    Engraved Fuse Spurs

    I have a last minute council rewire to do starting Friday, I need marked engraved fuse spurs (Washer, Boiler, Fridge, Freezer, Etc..) My usual wholesaler can get hager ones at a cost of £9 + Vat. Where do you guys get them from and at what cost ?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock