check

  1. N

    EICR's Check the MCB's

    Just a little wake up call to any one who carries out EICR's if you carry out inspections or any other work for that matter where electrium boards are installed check them for the Recalled MCB's,you probably you do but having come across them on inspections in three separate houses over the past...
  2. D Skelton

    Five fold increase in fusebox fires

    BBC News - 'Five-fold rise' in fuse board fires in London Hmmmmmmmmmmmmmmmmmmmmmm I wonder what the reson for this could be?????????????????
  3. D

    Meter Reading check / inspection - PV System

    Thought I had posted this back in Jan, but looks like it didnt post. A meter reader turned up unannounced to take a reading/inspection of the PV installation at my setting, said this was normal and would happen every 2yrs !
  4. J

    Check out me cable roller

    Made with two 90 degree angles boxes, 20 and 25 mm conduit with couplers and bushes, ooo yer.
  5. W

    Todays EICR gem - must be having one of those weeks

    Three phase board in mechanics shop no main earth conductor ZE - 586ohms no rcd
  6. D

    NICEIC Certification Scheme NICEIC Visit, test result sheets

    Hello guys the niceic is coming to my home soon and they are going to check my work. When i phoned em up one if the advisors on the other side of the phone advised me that they are not concerned either you have submitted it to building control just that you can test and carry out everything ok...
  7. D

    Phase Check

    I've finished a PIR yesterday and am just going over the paperwork. I just realised that I need to go back and do a phase check on the incoming 3-phase power lines. I've told the client I'll pop back in to do it but he has asked if I will need to shut down the power to the building to do this, I...
  8. P

    Price check please.

    Hi I have put a price in for a four bed new build, the customer has come back to me saying he thought the price would be nearer £4500-£5000 for labour I have gone in at £6250 labour plus £1440 for materials. What do you guys think am I way off the mark? This is a rough idea what is involved...
  9. B

    NIC assessment.

    Ive tried searching but not getting info I need. Would appreciate any advice as pretty nervous about my assessment ! Test results - We have our test results all stored on ipad and backed up on Macbook. How should I present these to the assessor will he be cool with flicking though our iPad or...
  10. J

    Mccbs for sale and other bits

    Check out my bits for sale one mccb ebay item number is 251479012208 check out all my othe parts having a clear out
  11. J

    Certificate to check earth arrangements.. ?

    The town I live in has been getting old metallic water pipes replaced with plastic, the water board has issued everyone with letters recommending "that you have your electrical earthing arrangements checked as it is possible, particularly for older properties with metallic service pipes that the...
  12. S

    New member, Hello I have a headlight relay? problem.

    Hi there, I'm Steve from Cumbria, just joined. I usually mess about with vintage radios and the like, but my Rover Metro has just started playing up and I thought I'd ask for advice before replacing any parts willy nilly. When I switch the headlights on, the dipped beam...
  13. N

    High end to end values plus three cables in one circuit

    Hi guys A little advice here would be much appreciated , it's been a long head ache day! Had a ring circuit in a house today with high readings end to end on all three , they where in there 40s , 50s and 60s but got a good r1 + r2 and a good Zs , is this normal to be able to have high end to...
  14. kkkkk

    High continuity resistance on ring final circuit

    Hi peeps I have continuity measurements on a ring final circuit of: L/L 1.4, N/N 0.78, E/E 1.7 Loose connections somewhere? There is a new CU with RCD. Insulation resistance measurements are good. There is a boiler added into the circuit as a spur. Any suggestions or comments? THANKS!! :) :) :)
  15. ray-bentos

    Can Someone Check My Diversity Calcs Please?

    Can someone please just check over my working & diversity calcs for the following CU change: Supply is 100amp TNC-S with 25mm tails, 16mm Main earth & 10mm bonding so all good there. Working from OSG Table A2: Working off number 9 (Standard arrangement of circuits in accordance with Appendix H)...
  16. G

    C&G 2394/95 or EAL 600/4337/38

    Hi All, I have recently passed my Level 2 C&G 2365 and 17th Edition and was meant to start my Level 3 C&G 2357 in January but it looks like due to numbers this is now not going to happen until September. I have been informed that I could go on and do the Inspection and Test 2394/5 but have...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock