Hi Guys
Just thought id ask the question as I've been asked to rewire a commercial property, and I don't do much commercial as it always has to be done tomorrow. Anyway its a basic setup Ring Main sockets and LED Panel lights.
However when I've gone to the board I can see its an old board...
My first post and thank you for reading.
I live in a commercial building that was converted to residential. I have a walk in closet where the light switch was installed inside the closet. I am adding shelving and want to move the switch so that it is on the other side of the wall to make space...
Morning all!
Just been having a quick flick through some threads and enjoying all the good advice being offered to many people on a variety of topics!
While flicking I've also noticed info on earthing nuts and wiska gland plates which have blown my mind as it seems I'm currently still stuck in...
As the title suggests I am doing an EICR for a commercial premises this morning.
I haven't looked at the job yet, it was a kind of "just come do what you need to do" job. It is an accountants which obviously means quite a few computers and I do believe they have a 3 phase supply but only uses...
I’ve had some different jobs over the last year for agency’s and now been taken on.
The pictures I had for install 1&2 unfortunately didn’t tell enough of a story for the NVQ.
Now most of the work I do is in domestic...
it’s been a small blow to the senses finding out the pictures won’t get...
Sorry for a bit of a long question.
For what it's worth this is Scotland.
I have been asked to quote a very large job in an old commercial office space. Site is being taken over and converted to a community church.
Work is of a large scale, removing a lot of wiring as multiple walls being...
Hi all,
I have been asked to install 2 x 32amp 3 phase sockets, one is to be used to plug in a forklift charger, the other one they are not yet sure but want one available for the future. What are people's thoughts on the omission of RCD's in what circumstance would a risk assessment negate...
I am having trouble determining the significant differences between Eaton's residential & commercial duplex receptacles:
Model #270W-10-LW (https://www.lowes.com/pd/Eaton-White-15-Amp-Duplex-Outlet-Residential-10-Pack-Outlet/1001438408)
Model #BR15W-10-LW...
I was asked to fault find on a Ideal IMAX W60 commercial boiler which I did and found that the boiler controller was faulty.
My question is, am I allowed to replace the controller which is situated in the boiler, albeit that you do not have to remove the casing.
Advise would be appreciated.
Hi All
Need some advice please
I have a site meeting this week on an installation on a site that I am responsible for routine maintenace
An installation was carried out by a company hired by our client without any input from the company I am employed by
I am seeking advice from forum members...
Hi there,
We have a small commercial laundry which we're told need to be re-wired. There is an old 3phase 3036 fused board and wiring in metal conduit.
We've been told that the switches etc should be IP rated but it most just a damp atmosphere rather than things getting really wet. What IP...
The wire reads
03474 f.t south wire saber link cat5e utp 4pr 24awg (ul) c (ul) cmr verified (ul) cat5e e198892 0822-h cat5e
The jack I am using is commercial electrics
#226 344
It contains an Ethernet port and a coaxial
Connection
I am including the wiring color code that is in the...
Hi the firm I work for is looking for local electricians to provide call outs for fault finding / repairs to kitchen ventilation controls, VSDs and speed controllers.
We're looking to reduce our travelling and response times and are based in Essex, areas we're looking to get engineers for...
Hi,
I'd be getting an electrician to complete any work but would still like an idea first on what is and isn't possible and the best way of going about it.
In a nutshell, we are looking at converting the spare area of our dining room into a mini-commercial kitchen by mainly using electrical...
Had a EICR completed on a commercial property and it has come back with N/A in the Ze box and also N/A in all the boxes regarding the serial number of the test equipment used. Do these have to be filled in?
There are a number of other mistakes and omissions as well including one DB's circuits...
Any recommendations for a commercial kitchen single phase DB?
Small pub kitchen and no space, two fryers in the same room and lots of lovely greasy pub food being knocked up so I'm looking for a DB or options that offer some grease/fat resistance.
Or a standard DB in an enclosure?
Hi, I'm new here and this is my first post, so excuse any forthcoming rookie errors.
I am from the UK with an electrical engineering background, coming from the heavy industry sector (mainly power stations). I recently took on the role of estimator/operations manager for a small electrical...
I'm trying to gauge what the common industry practice is relating to Initial Verification on large commercial jobs.
I've been working as a tester for the last few years in the South East, and when I test an installation, I'm expected to correct any minor faults, which I do.
As any tester will...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.