So the electrician made a hole in the outside wall to run the cable for the floodlights and in the same hole he threaded through the CAT 6 cable (shielded outdoor cable) for the POE camera.
Is this safe as I always thought you do not run network cable in the same conduit as electrical cables?
I am currently working on wiring a hot tub. I currently have a 50a subpanel with 2 breakers(2 pole 30A and a 1 pole 20a). The wires I am using to run to the tub are THHN wires and are 10awg for the 220v, and 12awg for the 110v. The heater for the tub runs on 220v and the circulation pump, jet...
hey guys, I ran 2 sets of #12 wire in conduit.
One end I had the sets separated and taped - terminated to 2 gfci outlets.
The other end I forgot to tape and I don't know which 3 wires (black, white, green) go to which outlet.
What's the easiest way to identify which set of wires should go to...
What is your view about such an installation technique? Asked to finish extension wiring and the installer has snaked wire all over the floor in white flexi. They intend to put an island in and this could easily lead to damaged cables. The other wiring for lights etc. is abysmal like a massive...
Hey
Just dropping this question to anyone that's passed the AM2S. Could i get some clarification on what the AM2S specification require's for the metal conduit. I've heard contradicting requirements. XS training online videos states that the metal conduit has a 3x 90' bends and a 45' offset...
I'm a trainee electrician and I was working with a qualified electrician extending a 32A ring circuit and we were using 2.5mm single conductors (CPC was 2.5mm aswell) going through PVC conduit and then going through steel trucking.
And to connect the old ring conductors with the new extended...
I just wondered what people’s thoughts were as to weather it should be earthed being an extraneous conductive part? It’s fixed to the concrete floor and if there was a break down in insulation there could be a potential difference. If you do bond it could it be introducing a risk?
1598092922...
Hi everyone,
I’m about to build some cupboards, (tomorrow!) but need to ensure that a suitable cable is left behind them and threaded through the adjacent wall for a socket that I want fitted in the future - on the other side of that wall. (Work is happening in many stages). I’m not attempting...
Nick Bundy ddoes imo a really neat rcbo board and uses some flexi conduit to get his cables across the garage which imo looks quite neat. But he gets quite a bit of stick in the comments about it...
View: https://www.youtube.com/watch?v=CmzsyYX2ths
thoughts
Hey all,
I'm running a few outlets to my basement from the main panel on the first floor. Since it is a garage, sealed 3/4" pvc conduit runs through the concrete into the basement. This connects to a metal junction box and 3/4 emt, with metal junction and outlet boxes the rest of the way...
Hi
I am doing a installation of two outdoor sockets
They are going to be positioned next to each other
so what I wanted to do was drill through the wall into one of the sockets then take a coupler of some sort connecting both of the outdoor sockets together to then take the cables to the...
Guys
Has anyone ever installed metallic conduit on an chrysotile and amosite AIB ceiling with red wall plugs.
We have had an niceic contractor install metal on the AIB ceiling with red wall plugs outside our flat for a big building company.
Now for months they have argued saying it was safe...
I have a 1-1/2 in. dia Non Metallic UL Liquid Tight Electrical Conduit with a straight connector.
Straight connector is a male fitting [twist], I need to reduce this to a 3/4 inch dia male [slip].
How do i do this? I can't seem to find a fitting?
So, I have a customer who wants the dodgy wiring in his cellar extending - currently he has a lighting circuit clipped with plastic clips, down to a bulkhead light and a double 13A socket for his freezer....
So I'm quoting him to run off a ring main to the socket, and install another socket and...
Just had a question put to me, cabling T&E On cable tray,lights are connected by klicks.
The klicks are mounted onto the tray, cables are looped into 25mm end box,plastic,
normal 3 x t&e cables,cable tied into position,does this contravene any reg, like the IP2X ingress protection.
Finger...
Another general question for folk out there with experience: if buying a tap & die set for metal conduit (20mm / 25mm) are there any to recommend, or any to avoid like the plague?
Good morning hope everyone is staying safe.
I have a question for some of the more experienced sparks, I have a client that wants her outdoor corner light replaced with a PIR and at the same time another light added above the door further along the wall.
She has bought an oval bulkhead light...
How would you guys to bend pvc conduit 20mm&25mm with spring to create 3 saddle bend or four saddle bend? Not like a simple 90 degree bends. Is there any formula or tricks or any steps you guys would do? Because I used the app to calculate the distance to bend but end up too close each bend and...
Hi All
Where do you guys get your PVC Conduit compression glands from - I.e if you were to wire a pre-wired floodlight?
I've seen some installations where you can just push a gland fitting directly into one of the legs of a 2-way/right angled junction boxes but I've not been lucky enough to...
Can anyone recommend any good UV protected conduit for runnign network cable externally?
I plan on running around 10 cables (7mm diameter each) from the loft to the 2nd floor and ground floor, but the cables are orange and i'd like to hide them in some pvc black conduit. A lot of the stuff i've...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.