hi need suggestion on using contactor with phase failure relay to ON a machine which is a cnc router. the cnc router has it self ON and OFF Buttons
so thinking to install a contactor with phase faller relay as a power source to machine in case of phase loss the machine power off.
currently its...
Hi all I am replacing a contactor in a communal block of flats I believe it for the external and internal lights. Am replacing like for like but it doesnt seem right to me. Looks like its been messed about with previously? The old contactor had an a2 terminal at the bottom aswell whereas the new...
Hello all,
I am needing a din rail mount timer which will control a contactor.
It will need to have a function which will allow me to have the contactor energise for 30mins. Off for 30mins. On for 30mins and repeat forever.
New to this and i am getting confused with On delay, Off delay timers...
Video of issue:
Hi
I’ve noticed a humming from my fuse box when my nightly off-peak water comes on.
When I first moved in I had a similar issue, albeit louder / more high pitched. An electrician replaced the contactor at the time.
It might be worth noting that that little grey box (I think...
Hi All
Could someone explain this to me please. Connected to the contactor, over load are two coils (are they ferrite chokes) please see photos. Also why only two and not three one for each phase, marked with a 65 in the photos.
The motor is used to control a blower unit, that moves a bean...
Any contactor specialists out there?
I have multiple machines that are connected via extraction ducting to a 2KVA 3 phase extraction fan on the external wall.
At the moment I rely on machine operators to switch the extraction fan on before using any of the machines (not all machines are used...
Hi all I have a 3 hp single phase motor that only runs when you hold the button and stops when you release it. I am struggling to get my head around which contactor to get for it. Any help would be great.
Hi guys and gals, I am struggling to figure out how to achieve what seems to be a simple control circuit. I’ve wired a test rig and the system works as expected apart from the lamp not illuminating! What I am trying to achieve is a 13amp socket controlled contactor. Part of the control circuit...
Hi
I looked at a contactor schneider ict 4 pole 400v 25a. The fault was a loud knocking noise coming from the electricial riser cupboard.
I suspected one of the contactors was pulling in and out rapidly (this known as chattering?)
I am hoping you can point me in a direction as I'm not...
Hi all
Bit of advice needed. Got called to a job with a bunch of lights not coming on the set up is a 5 way board controlled via a timeclock and double pole contactor also has a small fuse inside of enclosure which is plug in fused wire type if you look closely at picture any ideas what could be...
hi i need a relay instead of a contactor for a large room with two electric ufh mats, relay will be quieter than a noisey contactor, need 16amp 2or 4pole 230v,
Where do youguys/gals buy yours?
hi guys could you help me out please.
I have been asked to put a contactor on a 100 amp supply to a dB on a food stand. The contactor needs to shut off on fire through a firetrace system already installed.
1st I was thinking of coming of the dB with a 2a breaker to feed the pressure switch...
Hi all, been asked to go look at a contactor setup on a pump which is only used for garden lawn sprinklers etc.. and as I don't often play with danfoss overloads and such I cannot work out what's up!
I have no details on the load of the pump / model, make etc.. and only know that the pump was...
Hi all.
Don't have much experience on this topic.
Called to a job with an electric boiler. It has a dedicated 10mm supply from a 50A MCB. I narrowed down the fault the the contactor which was only feedig 1 of tge 3 elements and had scorching marks around the other 2 terminals. And is currently...
Hey all, I have a couple of jobs to look at which one is apparently not working right as is a single phase supply through a D.O.L starter / contactor for I think a borehole pump and another that is running a fresh air ventilation system and is now tripping out ! The thing is I've never needed to...
hi wiring up this single phase contactor for lights which are wired in 3 core, I presume they just terminate Brown 2T1 and Blue 6T3 cheers never has experience with a contactor before and earth to earth bar
Hi. A thought of a domestic fire in my house terrifies me, so I installed a really sophisticated fire alarm in my house. This system optionally can even turn off the gas valve (it has a motorized arm which is installed on the main valve) and switch off electricity in case if the fire is detected...
Hi, a friend of mine has moved to what once was a council house, and has a contactor that was apparently used by the council to control the heating. He wants to change over to an economy 7 type meter. The DNO won’t do anything until the contactor is gone, but won’t touch it themselves. It’s not...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.