didn't

  1. A

    Stupid stupid stupud customers.

    ......
  2. HappyHippyDad

    Is there a tube holder made for LED tubes T8?

    I'm not actually fitting any LED tubes but I like to be prepared! I cannot find any LED tube holders for a T8 LED tube, they all seem to be for fluorescents so you would have to remove the ballast and also replace the tube holder sockets. Surely there must be an LED holder? One of the threads...
  3. VoltzElectrical

    Philae' Rosetta mission is a hoax!

    Does anyone else think that it's a bit far fetched to believe a probe launched 10 years ago, with possibly even older technology can be shot through space 300 million miles, then somehow 'landed and operated' on a gravity free rock hurtling through space? This is the Western Front Willy...
  4. R

    rcd protection

    hi guys I've recently installed an saw cable from mains incommer to ccu which moved from old position in a property as i said I've used swa from outside electricity box into loft in bungalow then swapped to pvc 16mm via proper terminations enclosed ran it along onto of insulation in loft away...
  5. M

    Difficult customers...

    In a chatty mood.... So just wondered if anyone had had any really difficult customers...Or the customer that calls you up to do the work and then they know better once you've arrived. Had one recently, Customer wants a downflow heater put in 2 of their bathrooms. Had a look around the property...
  6. J

    Exit and Entry Doors on Scantronic 9600 Alarm

    Hi ... Apologies if this is the wrong place to post but everything I come across says closed thread . We have a Scantronic House Alarm and we have a front and rear door both with the contacts on them for exit and entry.I have looked at the paperwork and they are listed as exit and entry but we...
  7. A

    LED Tape

    I recently ordered some LED tape to try out at home; I've used it at work and it can produce a nice, subtle effect. After shopping around the net I ordered it from a company called 'SimpleLighting', or 'Trade Lighting'. According to their website they do next day delivery if ordered before 3pm...
  8. P

    Didn't think was possible

    Ok guys, thought I would share this with you, have a call to a one bedroom flat with rcd tripping . It's the main flat ring which is the one. It's a tns system, incoming supply is pyro. 16th edition board(crabtree), lights and smoke on none rcd side,kitchen, flat, cooker and unknown circuit on...
  9. S

    Is 2394/2395 changing

    Hi everyone, can anyone confirm if the time scale on doing the written exams is going from hour and a half to two hours soon or is not true.
  10. Pete999

    Other Trades Persons

    Reading thread just now reminded me of a job I helped my Lad out on, we were wiring some down lighters, anyway we got to the jobsite ealy to make a start, about 09:30 this Muppet turned up, no introduction, nothing but "how much longer youse goin to be ere matey" all day we replied with that he...
  11. R

    DIY LED Light Unit - DRIVER HELP NEEDED.

    hello everyone, i am in process of making some led light units for my aquarium, i have made a diagram to show how i have set out the circuit, i have a 12V driver thats powers the lights but i dont think its the right one and i dont want to leave it on for long periods of time if it is the...
  12. D

    Pulse pir?

    Hi guys, I have been asked to price a job to replace two outside lights which are switched and run in twin and earth. the customer would like to have a pir on these but with an override. Am i right in thinking its a pulse override pir that I need?
  13. M

    RCD not tripping under test

    Hi all. New user, but have lurked around here and used advice in other threads before, but haven't been able to find this problem anywhere, so figured I'd register and give it a shot. I've put in a new dual RCD consumer unit for a customer, went through all the testing with no problems, tested...
  14. A

    low bays didn't sell

    Well the low bays didn't sell on Ebay, so tomorrow they go to car boot. May well end up getting a couple o' quid each for them....don't say you were'nt offered a bargain LOL.
  15. B

    Econometer fitting and RCD tripping or not.

    Two things. A man from British Gas came to fit an economiser to my house yesterday. Surprised to see that he used a plug tester to "prove" isolation when pulling the sealed fuse and that he, although presumably not an electrician (he did the gas as well) was authorised to re-seal. If he is ok to...
  16. J

    Any advice on the matter? 'tis for my NIC DI Assessment

    Morning all, I've got a quick question regarding a consumer unit change. Basically, i'm using my parents house for my NIC assessment installations, one of which I'll be changing the consumer unit. Now here's where i'm a bit curious as what to do... The house is a small-medium sized 3 bedroom...
  17. M

    Web sites do they work

    Hi guys im mark ive been popping in and out of here for sometime now but have never joined in the chat/banter Anyway im thinking of building a website (or having one built) what are your views on them do they work for you ie getting enquires and leads for work
  18. R

    Testing Transformers

    Hi, Could anyone give me some advice on methods of testing 12v transformers if at all possible? Why I ask is because been to a customers because one of the under cabinet 12v lights wasn't working. First I tried changing the lamp which didn't work but worked in another fitting. Then just assumed...
  19. D

    Bitron entry-phone wiring

    Hi chaps, Thankfully this is my own cock up, not a clients... Took the entryphone off the wall in my flat while I redecorated, making careful notes of which terminals the cables went to. Unfortunatly, when disconnecting, an internal wire to the buzzer popped out of it's terminal and I've no...
  20. S

    Different Types Of Customers

    Have noticed now by doing lots of jobbing that there are 3 types of customers. One type is really concious and wants the best equipment and peace of mind for safety, the flip side to these customers is that they are really fussy and look over you when you are doing the job and ask so many...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock