I need to get an outside floodlight fitted, just need to think the best way to keep things logical.
Just want to make life easier for whoever might work on the installation at a later date.
The isolation switch will be in the kitchen but the actual light will be going outside through the wall...
Hi,
I have a lighting circuit which trips the RCD, I’ve got pared back so that if I take one brand new light fitting and wire it directly into the consumer unit with a brand new cable - and still the RCD trips. If I remove that wire from the consumer unit and put a 3 pin plug on it, and plug...
Originally a Sp DB,now 3pDb 400v.
The plans have not been altered to suit,so circuits are the same.
Would you worry about the rings are on different phases & close to each other.
I was with a customer today discussing installing new downlights.
I can't quite see the point in installing the really expensive ones as opposed to the cheaper ones. I don't mean the silly cheap ones on ebay that will just fall apart, but for example...
Lap fixed LED from screwfix £7 approx...
As per title, went to look at kitchen rewire this evening, no probs all straight forward, as I’m about to the leave lady says while you here I keep getting shocked from this wall when I washed it down?
Turns out someone has extended old 4 mm stranded cooker circuit with 2.5 and put a double...
Hello all, I've just moved into a new flat. It's only about 6 years old, so a pretty new build.
The hallway and 2 living area light fittings are standard B22 lights, but the 2 bedrooms have a weird fitting that looks more like the sort you plug a halogen bulb into, like a GU10 bulb, only they...
I have two rooms.
One room has 12 LED ceiling lights with two switches. One is a regular switch the other is a dimmer.
The second room has 8 LED ceiling lights with a single dimmer.
The LED's in both room are the same, and the dimmer switch is the same. So the only difference is the regular...
Hello all. I am a fully qualified jib spark. I am looking to go into the FMCG field/manufacturing.
I want to do something more complex rather then just putting up ladder rack and tray.
How can i go into things like variable speed motors. Conveyor belts. PLCs etc.
Whats the best way to get...
Just joined for help - hello all :)
I am NOT an electrician, but I am able to switch off the supply to change light switches and plug whatever was in L1, L2 or Common into the new switch.
I bought a new chrome fan isolator switch today to replace a nasty plastic one however, and the markings...
Hello, I'm going through my 18th edition regs book and discovered two paragraphs that are identically the same. It is regulation 422.3.1 and 422.4.2. is this deliberate because it matters in both section. I brought this book from IET itself.
Ordering some junction boxes and the white 30A is cheaper than the Black one. Why ?. They are same brand and both three way.
https://www.NoLinkingToThis/search?search=30A+Junction+box+
Been installing downlights today in a kitchen and dining room. nothing fancy electrically speaking but a pain in backside as one part is new the other old.
The new is bog standard plaster board. the old is lath and plaster. Using charcoal in the plaster so its like concrete. makes repairing the...
Have a job to price up today in Corsham, comes under SSE, they are happy to let you get on and pull the fuse if it is domestic and single phase. if you dont have any seals for when done they will happily provide you with some from the local depot.
Western Power on the other hand who are the DNO...
This is one of those slightly embarrassing questions that I feel I should know the answer to. I can feel the answer lurking under my skin but it's just not surfacing and needs a push!
Pre-work visit for a CU change. There was 65K Ω resistance between N-E on the continuity setting, however when...
I am adding a fuse box to a campervan to run lights etc off the leisure battery.
The existing circuits are fused at 15 amps so I am using 21a cable.
But the spade connectors I have are rated at 15a? I thought all spade connectors were the same as most don't give a rating?
Will these do or will...
My mates asked me to go and help find some faults at a house. Rcd tripping so he put 3 socket rings on 3 separate rcbos. Now he says they are all tripping at different times. . Says he's tested ir and it's about 6 meg on one ring. If they are separate why would they trip. . Good Ze in board ...
Hi
Has anyone considered that every time you do a continutity/earth loop test, on the same circuit you get a different result every time?
I had an end to end test on a ring circuit today and kept pressing the test button. The results jump all over the place.
How credible is any test if the...
The air horn I have fitted sounds great when wires are put across a 12v battery, since it has been fitted to the vehicle it sounds high pitched compared to the deep tone it should have. The deep tone can be obtained (but not always) if I flas the head lights at the same time a operating the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.