driver

Recent contents Top users
  1. M

    Looking for a 350ma 6w Driver

    So as the title states and this turned out to be harder than it sounds task, been trying to find a driver for an LED fixture I have that came without a driver. It requires 350ma at 6w and 17v. I cant find the exact driver with these exact specs but wondering if 300ma will work or if 8 watts will...
  2. A

    Hiding led strip driver in bedroom?

    Hi everyone I’m after some advice please. I’m installing some LED profile around a customers bedroom ceiling for some led strip to sit in and diffuser on top obviously. My question is how do people hide the driver? In ceiling void and drop in through back of driver? But most are plug top...
  3. dilligaf76

    L.E.D Driver 60 Watts For 4.8 Watts Light ???

    Can anyone tell me if its okay for a 12v 4.8w led fish tank light tube to run off a driver that puts out 60w???
  4. Shoes70

    Issue with 12v wire LED conversion from halogen

    I purchased a house that has a really cool 12v halogen setup where two wires are suspended across the ceiling in two different locations, and each of which carries four 50W halogen bulbs. Each has a separate driver and dimmer. I first replaced the halogen bulbs with 8w LEDs, and they worked...
  5. J

    Older Garden RGB LEDS, upgrading driver / Zigbee possible?

    Hello, I’ve have some ten year old Collingwood SL020 RGB led garden spike lights which I’d like to keep using but wondering if I can use them with a more modern LED driver/with some Zigbee remote possibilities. Collingwood don't make a replacement driver/reciever unit for these so looking 3rd...
  6. _q12x_

    3digit multiplexed LCD (custom) driver

    Hello ! I am building for some time a cct to drive a 3digit multiplexed LCD. (from aliexpress) From the sellers on aliexpress I managed to find a circuit diagram of the LCD. I color it myself to understand exactly how to actually drive it. After making the cct in reality, I discovered that...
  7. BitFrosty

    Constant current driver replacement

    Hey folks, i work for a relatively small company, but we are doing some big jobs. And right our headache is taking over outdoor lighting maintenance from other guys (you know that situation where the only way to know anything about light is to get up there on the pole and open it to read that...
  8. R

    Driver door wiring on 99 GMC Jimmy

    I replaced a door on a 99 GMC Jimmy with a old 98 door and the wiring was a little different, the 99 had 15 color coded cables and the 98 had just 10, I matched the colors that I could and taped the other 5 cables. Once I put the door back together I could only adjust the mirrors and lock/unlock...
  9. toplightco

    Help retro fitting lighting on old Lutron system from 2007

    I've been asked to quote for track lighting replacement in a London art gallery that's suffered extensive water damage from the floor above. Quoting for the track and CRI90+ tracklights is not a problem for us, that's what we do. The problem is they want us to quote for the additional lighting...
  10. M

    LED Driver replacement

    Hello everyone Would this driver be a suitable replacement to this one vvv? Not gonna lie, it gives me a headache already
  11. Splitty

    Where can get a 20 watt round led driver with a 12v output ?

    Hi Forum people. First time post here. I have a pair of semi flush fittings that are currently 10 Halogen capsules per fitting. I want to convert these to LED at 2 watts per capsule. Space is a very limiting factor. Each fitting currently has a round transformer inside. I only have an 80mm...
    • Splitty
    • Thread
    • 12v driver get led output round watts where
    • Replies: 17
    • Forum: Lighting Forum
  12. K

    LED Driver alternative

    Hi, I wondered if anyone could advise on a suitable alternative to the following LED driver: Tried CEF, RS, and online but they can't get hold of the exact part.
  13. J

    Help! Which LED driver do I need

    Hey all. Have a client who’s LED downlights keep breaking after 6 months or so. I didn’t put them in originally. I looked the details on the lights and the transformers and they don’t seem to match. But I can’t find anything to match the light as the input current is 300ma and voltage is...
  14. S

    Noise filter in inverter driver circuit

    I have one 1kw single phase and one 5.5kw 3 phase inverter to drive 2 motors. As the installation is in proximity to 2 smart meter, I'm thinking about the installation of a noise filter. Both motor driver will be switched by a 3 phase contactor. Does the filter makes any sense , if a 3 phase...
  15. HappyHippyDad

    Which LED driver?......

    I'm not too sure which LED driver I can use to replace the one in the picture. It states max 21V, does this mean any thing less than that is ok? It also says DC 24V though, which has confused me. Would it be a constant current LED driver seeing as though thus one implies the voltage is...
  16. D

    when did the impact driver become the tool of choice to do terminals up ?

    Pretty much every celeb sparks on Youtube and every celeb diy training video on how to do a board change shows the sparks using an impact driver When did this become the norm ?
  17. J

    Meanwell driver elg-150-36a

    Trying to extend the 2 output wires safely(around 2 metres),i don't have much previous experiences with electrical appliances but I Did some research and I need a wago connector block possibly 2 Which rated blocks are suited ? I don't know if the 36a gets split in half on the outputs The...
  18. D

    Wiha Pocket-Mini driver

    Something I will have to buy now and add to my EICR box
  19. sjhall

    Led driver help required

    Hi Looking for a bit of advice on a led driver The Aurora in the picture below is the one that needs replacing today / tmrw And the only 700ma constant current driver I can find local has slightly different specs DC 16.5v max on the original 33 - 40v dc out on the new one Will this work...
  20. D

    Impact Driver Vs MCB

    Every big build I have had the pleasure to work on the last 10+ years I would say 99% of the sparks use their 18v impact to do the consumer unit connections Good practice as its fast and effective Or butchery and will lead to knackered switch gear

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock